lkml.org 
[lkml]   [2018]   [Feb]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v3 2/5] dt-bindings: adv7511: Add support for i2c_new_secondary_device
Date
Hi Kieran,

Thank you for the patch.

On Tuesday, 13 February 2018 00:07:50 EET Kieran Bingham wrote:
> From: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
>
> The ADV7511 has four 256-byte maps that can be accessed via the main I²C
> ports. Each map has it own I²C address and acts as a standard slave
> device on the I²C bus.
>
> Extend the device tree node bindings to be able to override the default
> addresses so that address conflicts with other devices on the same bus
> may be resolved at the board description level.
>
> Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
> Reviewed-by: Rob Herring <robh@kernel.org>

Same comment as for 1/5 about the subject line.

> ---
> v2:
> - Fixed up reg: property description to account for multiple optional
> addresses.
> - Minor reword to commit message to account for DT only change
> - Collected Robs RB tag
>
> v3:
> - Split map register addresses into individual declarations.
>
> .../devicetree/bindings/display/bridge/adi,adv7511.txt | 18 +++++++++++++--
> 1 file changed, 16 insertions(+), 2 deletions(-)
>
> diff --git
> a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt
> b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt index
> 0047b1394c70..3f85c351dd39 100644
> --- a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt
> +++ b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt
> @@ -14,7 +14,13 @@ Required properties:
> "adi,adv7513"
> "adi,adv7533"
>
> -- reg: I2C slave address
> +- reg: I2C slave addresses
> + The ADV7511 internal registers are split into four pages exposed through
> + different I2C addresses, creating four register maps. Each map has it own
> + I2C address and acts as a standard slave device on the I²C bus. The main
> + address is mandatory, others are optional and revert to defaults if not
> + specified.

Nitpicking again, you're mixing I2C and I²C.

> +
>
> The ADV7511 supports a large number of input data formats that differ by
> their color depth, color format, clock mode, bit justification and random
> @@ -70,6 +76,9 @@ Optional properties:
> rather than generate its own timings for HDMI output.
> - clocks: from common clock binding: reference to the CEC clock.
> - clock-names: from common clock binding: must be "cec".
> +- reg-names : Names of maps with programmable addresses.
> + It can contain any map needing a non-default address.
> + Possible maps names are : "main", "edid", "cec", "packet"
>
> Required nodes:
>
> @@ -88,7 +97,12 @@ Example
>
> adv7511w: hdmi@39 {
> compatible = "adi,adv7511w";
> - reg = <39>;
> + /*
> + * The EDID page will be accessible on address 0x66 on the i2c

And now you're using lowercase :-)

> + * bus. All other maps continue to use their default addresses.
> + */
> + reg = <0x39>, <0x66>;
> + reg-names = "main", "edid";
> interrupt-parent = <&gpio3>;
> interrupts = <29 IRQ_TYPE_EDGE_FALLING>;
> clocks = <&cec_clock>;

With these fixed (or not, up to you),

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

--
Regards,

Laurent Pinchart

\
 
 \ /
  Last update: 2018-02-13 13:10    [W:0.057 / U:0.924 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site