lkml.org 
[lkml]   [2018]   [Feb]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 1/3] Input: gpio-keys - add support for wakeup event action
From
Date
Hi Jeffy,

On 12/02/18 23:13, Brian Norris wrote:
> Hi Jeffy,
>
> On Sat, Feb 10, 2018 at 07:09:05PM +0800, Jeffy Chen wrote:
>> Add support for specifying event actions to trigger wakeup when using
>> the gpio-keys input device as a wakeup source.
>>
>> This would allow the device to configure when to wakeup the system. For
>> example a gpio-keys input device for pen insert, may only want to wakeup
>> the system when ejecting the pen.
>>
>> Suggested-by: Brian Norris <briannorris@chromium.org>
>> Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
>> ---
>>
>> Changes in v2:
>> Specify wakeup event action instead of irq trigger type as Brian
>> suggested.
>>
>> drivers/input/keyboard/gpio_keys.c | 27 +++++++++++++++++++++++++++
>> include/linux/gpio_keys.h | 2 ++
>> include/uapi/linux/input-event-codes.h | 9 +++++++++
>> 3 files changed, 38 insertions(+)
>>
>> diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c
>> index 87e613dc33b8..5c57339d3999 100644
>> --- a/drivers/input/keyboard/gpio_keys.c
>> +++ b/drivers/input/keyboard/gpio_keys.c
>> @@ -45,6 +45,8 @@ struct gpio_button_data {
>> unsigned int software_debounce; /* in msecs, for GPIO-driven buttons */
>>
>> unsigned int irq;
>> + unsigned int irq_trigger_type;
>> + unsigned int wakeup_trigger_type;
>> spinlock_t lock;
>> bool disabled;
>> bool key_pressed;
>> @@ -540,6 +542,8 @@ static int gpio_keys_setup_key(struct platform_device *pdev,
>> }
>>
>> if (bdata->gpiod) {
>> + int active_low = gpiod_is_active_low(bdata->gpiod);
>> +
>> if (button->debounce_interval) {
>> error = gpiod_set_debounce(bdata->gpiod,
>> button->debounce_interval * 1000);
>> @@ -568,6 +572,16 @@ static int gpio_keys_setup_key(struct platform_device *pdev,
>> isr = gpio_keys_gpio_isr;
>> irqflags = IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING;
>>
>> + switch (button->wakeup_event_action) {
>> + case EV_ACT_ASSERTED:
>> + bdata->wakeup_trigger_type = active_low ?
>> + IRQF_TRIGGER_FALLING : IRQF_TRIGGER_RISING;
>> + break;
>> + case EV_ACT_DEASSERTED:
>> + bdata->wakeup_trigger_type = active_low ?
>> + IRQF_TRIGGER_RISING : IRQF_TRIGGER_FALLING;
>> + break;
>
> What about EV_ACT_ANY? And default case? I think for ANY, we're OK
> letting suspend/resume not reconfigure the trigger type, but maybe a
> comment here to note that?
>
>> + }
>> } else {
>
> What about the 'else' case? Shouldn't we try to handle that?
>
> Brian
>
>> if (!button->irq) {
>> dev_err(dev, "Found button without gpio or irq\n");
>> @@ -618,6 +632,8 @@ static int gpio_keys_setup_key(struct platform_device *pdev,
>> return error;
>> }
>>
>> + bdata->irq_trigger_type = irq_get_trigger_type(bdata->irq);
>> +
>> return 0;
>> }
>>
>> @@ -718,6 +734,9 @@ gpio_keys_get_devtree_pdata(struct device *dev)
>> /* legacy name */
>> fwnode_property_read_bool(child, "gpio-key,wakeup");
>>
>> + fwnode_property_read_u32(child, "wakeup-event-action",
>> + &button->wakeup_event_action);
>> +
>> button->can_disable =
>> fwnode_property_read_bool(child, "linux,can-disable");
>>
>> @@ -854,6 +873,10 @@ static int __maybe_unused gpio_keys_suspend(struct device *dev)
>> if (device_may_wakeup(dev)) {
>> for (i = 0; i < ddata->pdata->nbuttons; i++) {
>> struct gpio_button_data *bdata = &ddata->data[i];
>> +
>> + if (bdata->button->wakeup && bdata->wakeup_trigger_type)
>> + irq_set_irq_type(bdata->irq,
>> + bdata->wakeup_trigger_type);
>> if (bdata->button->wakeup)
>> enable_irq_wake(bdata->irq);
>> bdata->suspended = true;
>> @@ -878,6 +901,10 @@ static int __maybe_unused gpio_keys_resume(struct device *dev)
>> if (device_may_wakeup(dev)) {
>> for (i = 0; i < ddata->pdata->nbuttons; i++) {
>> struct gpio_button_data *bdata = &ddata->data[i];
>> +
>> + if (bdata->button->wakeup && bdata->wakeup_trigger_type)
>> + irq_set_irq_type(bdata->irq,
>> + bdata->irq_trigger_type);
>> if (bdata->button->wakeup)
>> disable_irq_wake(bdata->irq);
>> bdata->suspended = false;
>> diff --git a/include/linux/gpio_keys.h b/include/linux/gpio_keys.h
>> index d06bf77400f1..7160df54a6fe 100644
>> --- a/include/linux/gpio_keys.h
>> +++ b/include/linux/gpio_keys.h
>> @@ -13,6 +13,7 @@ struct device;
>> * @desc: label that will be attached to button's gpio
>> * @type: input event type (%EV_KEY, %EV_SW, %EV_ABS)
>> * @wakeup: configure the button as a wake-up source
>> + * @wakeup_event_action: event action to trigger wakeup
>> * @debounce_interval: debounce ticks interval in msecs
>> * @can_disable: %true indicates that userspace is allowed to
>> * disable button via sysfs
>> @@ -26,6 +27,7 @@ struct gpio_keys_button {
>> const char *desc;
>> unsigned int type;
>> int wakeup;
>> + int wakeup_event_action;
>> int debounce_interval;
>> bool can_disable;
>> int value;
>> diff --git a/include/uapi/linux/input-event-codes.h b/include/uapi/linux/input-event-codes.h
>> index 53fbae27b280..d7917b0bd438 100644
>> --- a/include/uapi/linux/input-event-codes.h
>> +++ b/include/uapi/linux/input-event-codes.h
>> @@ -32,6 +32,15 @@
>> #define INPUT_PROP_CNT (INPUT_PROP_MAX + 1)
>>
>> /*
>> + * Event action types
>> + */
>> +#define EV_ACT_ANY 0x00 /* asserted or deasserted */
>> +#define EV_ACT_ASSERTED 0x01 /* asserted */
>> +#define EV_ACT_DEASSERTED 0x02 /* deasserted */
>> +#define EV_ACT_MAX 0x02
>> +#define EV_ACT_CNT (EV_ACT_MAX+1)
>> +
>> +/*
>> * Event types
>> */
>>
>> --
>> 2.11.0
>>
>>

Not sure if you were aware but there is also some discussion related to this,
maybe we can join the efforts?

v1: https://patchwork.kernel.org/patch/10208261/
v2: https://patchwork.kernel.org/patch/10211147/

Best regards,
Enric

\
 
 \ /
  Last update: 2018-02-13 11:41    [W:0.073 / U:28.612 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site