lkml.org 
[lkml]   [2018]   [Feb]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 1/2] ASoC: codecs: Add support for AK5558 ADC driver
On Mon, Feb 05, 2018 at 07:01:54PM +0200, Daniel Baluta wrote:
> AK5558 is a 32-bit, 768 kHZ sampling, differential input ADC
> for digital audio systems.

> --- /dev/null
> +++ b/sound/soc/codecs/ak5558.c
> @@ -0,0 +1,618 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Audio driver for AK5558 ADC

Please don't mix C++ and C style comments - just make the entire comment
C++.

> +static const char * const tdm_texts[] = {
> + "Off", "TDM128", "TDM256", "TDM512",
> +};

This looks like it should be a set_tdm_slot() operation, and indeed
set_tdm_slot() appears to be implemented and duplicate this.

> +static const char * const dsdon_texts[] = {
> + "PCM", "DSD",
> +};

This looks like it's setting the DAI format?

> + SND_SOC_DAPM_MUX("AK5558 Ch1 Enable", SND_SOC_NOPM, 0, 0,
> + &ak5558_channel1_mux_control),

On/off controls should be switches not muxes, though if this is just
selecting which channels are active (rather than a mute) I'd not expect
it to be a control at all - the board can say if inputs are disabled.

> +static int ak5558_set_mcki(struct snd_soc_codec *codec, int fs, int rclk)
> +{
> + u8 mode;
> +
> + mode = snd_soc_read(codec, AK5558_02_CONTROL1);
> + mode &= ~AK5558_CKS;
> + mode |= AK5558_CKS_AUTO;
> +
> + snd_soc_update_bits(codec, AK5558_02_CONTROL1, AK5558_CKS, mode);
> +
> + return 0;
> +}

This appears to just ignore the parameters?

> +static int ak5558_set_dai_mute(struct snd_soc_dai *dai, int mute)
> +{
> + struct snd_soc_codec *codec = dai->codec;
> + struct ak5558_priv *ak5558 = snd_soc_codec_get_drvdata(codec);
> + int ndt = 0;
> +
> + if (!mute)
> + return 0;
> +
> + if (ak5558->fs != 0)
> + ndt = 583000 / ak5558->fs;
> +
> + msleep(max(ndt, 5));
> +
> + return 0;
> +}

This doesn't appear to interact with the device at all.

> +static int ak5558_set_bias_level(struct snd_soc_codec *codec,
> + enum snd_soc_bias_level level)
> +{
> + switch (level) {
> + case SND_SOC_BIAS_ON:
> + case SND_SOC_BIAS_PREPARE:
> + case SND_SOC_BIAS_STANDBY:
> + break;
> + case SND_SOC_BIAS_OFF:
> + snd_soc_write(codec, AK5558_00_POWER_MANAGEMENT1, 0x00);
> + break;
> + }

I'd expect there to be symmetry here - if we disable things when
transitioning to _OFF we should enable them when transitioning out.

> + reg = snd_soc_read(codec, AK5558_03_CONTROL2);
> + reg &= ~AK5558_MODE_BITS;
> + reg |= tdm_mode;
> + snd_soc_write(codec, AK5558_03_CONTROL2, reg);

snd_soc_update_bits().
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2018-02-12 13:02    [W:0.146 / U:0.480 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site