lkml.org 
[lkml]   [2018]   [Feb]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 0/3] Fix broken bananapi m2 devicetree/regulators
From
Date


On 10.02.2018 22:08, Sergey Suloev wrote:
> On 02/11/2018 12:01 AM, Philipp Rossak wrote:
>> Hey Sergey,
>>
>> Thanks for mentioning, but I think the problem has nothing to do with
>> those patches. I tested them with the v4.15.0 Kernel since this is the
>> last stable release and we are right now in the merging window.
>>
>> I tested the latest mainline, without those patches and the kernel is
>> not booting (I can't see any uart output).
>>
>> Thanks,
>> Philipp
>>
>> On 10.02.2018 14:56, Sergey Suloev wrote:
>>> On 02/09/2018 08:52 PM, Philipp Rossak wrote:
>>>> This patchseries fixes the bananapi m1 devicetree, to be able to
>>>> boot again.
>>>> The first two patches update/improve the devicetree and the last
>>>> patch adds
>>>> all missing regulators.
>>>>
>>>> Regards,
>>>> Philipp
>>>>
>>>> Philipp Rossak (3):
>>>>    arm: dts: sun6i: a31s: bpi-m2: update mmc supply nodes
>>>>    arm: dts: sun6i: a31s: bpi-m2: improve pmic properties
>>>>    arm: dts: sun6i: a31s: fix: bpi-m2: add missing regulators
>>>>
>>>>   arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts | 70
>>>> +++++++++++++++++++++++-
>>>>   1 file changed, 67 insertions(+), 3 deletions(-)
>>>>
>>> patches are not working
>>>
>>> Thanks
>>>
> same problem, but after applying the patches my device is till hanging.
>
>
Can you please share a bootlog? Here is mine [1]. As you can see I'm
able to boot.
I build it with this branch [2]. For testing you should replace the dtb
and the uImage/zImage

Philipp


[1]: https://pastebin.com/mVjv3LDf
[2]: https://github.com/embed-3d/linux/tree/testing/bpi-m2-regulator-test-2

\
 
 \ /
  Last update: 2018-02-10 23:07    [W:0.086 / U:0.308 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site