lkml.org 
[lkml]   [2018]   [Feb]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] Revert "extcon: axp288: Redo charger type detection a couple of seconds after probe()"
Hi,

On 2018년 02월 02일 08:48, Hans de Goede wrote:
> Hi,
>
> On 01-02-18 22:22, Chanwoo Choi wrote:
>> Hi Hans,
>>
>> Why don't modify the extcon-axp288.c after revert it?
>
> Fixing the axp288 extcon code properly requires usb-role-switch support
> which is not yet in the mainline kernel, I will submit the fix for it
> once usb-role-switch support is in the mainline.
>
>> Instead, you sent the patch[1].
>
> Yes this is a preparation patch for the pending extcon-axp288 fix.

OK. Applied it.

Thanks,
Chanwoo Choi

>
> Regards,
>
> Hans
>
>
>
> Are you going to send other patch for extcon-axp288.c?
>> [1] [PATCH] extcon: int3496: process id-pin first so that we start with the right status
>>
>>
>> On 2018년 01월 26일 02:10, Hans de Goede wrote:
>>> Redoing the charger type detection to give the usb-role-switch code time
>>> to properly set the role-switch is no good for mainline, since the
>>> usb-role-switch code is not yet in mainline (my bad, sorry).
>>>
>>> Also once we've that code there are better ways to fix this which are
>>> not prone to racing as doing a retry after 2 seconds is.
>>>
>>> This reverts commit 50082c17bb1455acacd376ae30dff92f2e1addbd.
>>>
>>> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
>>> ---
>>> drivers/extcon/extcon-axp288.c | 32 ++------------------------------
>>> 1 file changed, 2 insertions(+), 30 deletions(-)
>>>
>>> diff --git a/drivers/extcon/extcon-axp288.c b/drivers/extcon/extcon-axp288.c
>>> index 9abc99e8c0a5..901eddd3994b 100644
>>> --- a/drivers/extcon/extcon-axp288.c
>>> +++ b/drivers/extcon/extcon-axp288.c
>>> @@ -1,7 +1,6 @@
>>> /*
>>> * extcon-axp288.c - X-Power AXP288 PMIC extcon cable detection driver
>>> *
>>> - * Copyright (C) 2016-2017 Hans de Goede <hdegoede@redhat.com>
>>> * Copyright (C) 2015 Intel Corporation
>>> * Author: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
>>> *
>>> @@ -98,11 +97,9 @@ struct axp288_extcon_info {
>>> struct device *dev;
>>> struct regmap *regmap;
>>> struct regmap_irq_chip_data *regmap_irqc;
>>> - struct delayed_work det_work;
>>> int irq[EXTCON_IRQ_END];
>>> struct extcon_dev *edev;
>>> unsigned int previous_cable;
>>> - bool first_detect_done;
>>> };
>>> /* Power up/down reason string array */
>>> @@ -140,25 +137,6 @@ static void axp288_extcon_log_rsi(struct axp288_extcon_info *info)
>>> regmap_write(info->regmap, AXP288_PS_BOOT_REASON_REG, clear_mask);
>>> }
>>> -static void axp288_chrg_detect_complete(struct axp288_extcon_info *info)
>>> -{
>>> - /*
>>> - * We depend on other drivers to do things like mux the data lines,
>>> - * enable/disable vbus based on the id-pin, etc. Sometimes the BIOS has
>>> - * not set these things up correctly resulting in the initial charger
>>> - * cable type detection giving a wrong result and we end up not charging
>>> - * or charging at only 0.5A.
>>> - *
>>> - * So we schedule a second cable type detection after 2 seconds to
>>> - * give the other drivers time to load and do their thing.
>>> - */
>>> - if (!info->first_detect_done) {
>>> - queue_delayed_work(system_wq, &info->det_work,
>>> - msecs_to_jiffies(2000));
>>> - info->first_detect_done = true;
>>> - }
>>> -}
>>> -
>>> static int axp288_handle_chrg_det_event(struct axp288_extcon_info *info)
>>> {
>>> int ret, stat, cfg, pwr_stat;
>>> @@ -223,8 +201,6 @@ static int axp288_handle_chrg_det_event(struct axp288_extcon_info *info)
>>> info->previous_cable = cable;
>>> }
>>> - axp288_chrg_detect_complete(info);
>>> -
>>> return 0;
>>> dev_det_ret:
>>> @@ -246,11 +222,8 @@ static irqreturn_t axp288_extcon_isr(int irq, void *data)
>>> return IRQ_HANDLED;
>>> }
>>> -static void axp288_extcon_det_work(struct work_struct *work)
>>> +static void axp288_extcon_enable(struct axp288_extcon_info *info)
>>> {
>>> - struct axp288_extcon_info *info =
>>> - container_of(work, struct axp288_extcon_info, det_work.work);
>>> -
>>> regmap_update_bits(info->regmap, AXP288_BC_GLOBAL_REG,
>>> BC_GLOBAL_RUN, 0);
>>> /* Enable the charger detection logic */
>>> @@ -272,7 +245,6 @@ static int axp288_extcon_probe(struct platform_device *pdev)
>>> info->regmap = axp20x->regmap;
>>> info->regmap_irqc = axp20x->regmap_irqc;
>>> info->previous_cable = EXTCON_NONE;
>>> - INIT_DELAYED_WORK(&info->det_work, axp288_extcon_det_work);
>>> platform_set_drvdata(pdev, info);
>>> @@ -315,7 +287,7 @@ static int axp288_extcon_probe(struct platform_device *pdev)
>>> }
>>> /* Start charger cable type detection */
>>> - queue_delayed_work(system_wq, &info->det_work, 0);
>>> + axp288_extcon_enable(info);
>>> return 0;
>>> }
>>>
>>
>
>
>

\
 
 \ /
  Last update: 2018-02-02 01:32    [W:0.064 / U:0.104 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site