Messages in this thread | | | Date | Thu, 1 Feb 2018 08:57:20 +0100 | From | Uwe Kleine-König <> | Subject | Re: [PATCH v3 2/2] ARM: dts: imx25-pinfunc: Always set SION for eSDHC CMD |
| |
On Wed, Jan 31, 2018 at 10:35:44PM +0100, Benoît Thébaudeau wrote: > The eSDHC does not work properly if the SION bit is not set for the > bidirectional CMD signal, whatever the eSDHC instance and the selected > pad. Therefore, setting SION is mandatory for all eSDHC CMD ports. Do > this for MX25_PAD_*__ESDHCn_CMD in imx25-pinfunc.h in order to enforce > this behavior for all boards. > > This had already been done for eSDHC1, but not for eSDHC2. Also, define > MX25_PAD_FEC_MDC__ESDHC2_CMD so that all the possible cases are covered > from now on. > > Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> > Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com> > Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Thanks Uwe
-- Pengutronix e.K. | Uwe Kleine-König | Industrial Linux Solutions | http://www.pengutronix.de/ |
| |