lkml.org 
[lkml]   [2018]   [Dec]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/6] ARM: dts: s5pv210: galaxys: Remove hardcoded bootargs
Date
Since we have uboot (flashed in place of stock kernel),
it's not needed anymore to hardcode bootargs.

Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
---
arch/arm/boot/dts/s5pv210-galaxys.dts | 7 -------
1 file changed, 7 deletions(-)

diff --git a/arch/arm/boot/dts/s5pv210-galaxys.dts b/arch/arm/boot/dts/s5pv210-galaxys.dts
index 842276749717..cf161bbfbacf 100644
--- a/arch/arm/boot/dts/s5pv210-galaxys.dts
+++ b/arch/arm/boot/dts/s5pv210-galaxys.dts
@@ -11,13 +11,6 @@

chosen {
stdout-path = &uart2;
- /*
- * It's hard to change those parameters in stock bootloader,
- * since it requires special hardware/cable.
- * Let's hardocde bootargs for now, till u-boot port is finished,
- * with which it should be easier.
- */
- bootargs = "root=/dev/mmcblk2p1 rw rootwait ignore_loglevel earlyprintk";
};

nand_pwrseq: nand-pwrseq {
--
2.17.1
\
 
 \ /
  Last update: 2018-12-28 17:19    [W:0.086 / U:0.668 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site