lkml.org 
[lkml]   [2018]   [Dec]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Date
    SubjectRe: [PATCH v2 5/5] usb:cdns3 Add Cadence USB3 DRD Driver
    >
    > The host side of USBSS-DRD controller is compliance
    > with XHCI specification, so it works with
    > standard XHCI linux driver.
    >

    After adding my glue layer change (with my phy part) and make one
    change for this code,
    the xHCI can work at my platform. I list the comments from today's
    review and debug.
    The comments are at Makefile and drd.c.

    > + If you choose to build this driver as module it will
    > + be dynamically linked and module will be called cdns3-pci.ko
    > +
    > +endif
    > diff --git a/drivers/usb/cdns3/Makefile b/drivers/usb/cdns3/Makefile
    > new file mode 100644
    > index 000000000000..3f63baa24294
    > --- /dev/null
    > +++ b/drivers/usb/cdns3/Makefile
    > @@ -0,0 +1,16 @@
    > +# SPDX-License-Identifier: GPL-2.0
    > +# define_trace.h needs to know how to find our header
    > +CFLAGS_trace.o := -I$(src)
    > +
    > +obj-$(CONFIG_USB_CDNS3) += cdns3.o
    > +obj-$(CONFIG_USB_CDNS3_PCI_WRAP) += cdns3-pci.o
    > +
    > +cdns3-y := core.o drd.o trace.o
    > +
    > +ifneq ($(CONFIG_DEBUG_FS),)
    > + cdns3-y += debugfs.o
    > +endif
    > +
    > +cdns3-$(CONFIG_USB_CDNS3_GADGET) += gadget.o ep0.o
    > +cdns3-$(CONFIG_USB_CDNS3_HOST) += host.o
    > +cdns3-pci-y := cdns3-pci-wrap.o

    Why do you want add two lines for pci_wrap? I change this Makefile like below:

    # SPDX-License-Identifier: GPL-2.0
    # define_trace.h needs to know how to find our header
    CFLAGS_trace.o := -I$(src)

    cdns3-y := core.o drd.o trace.o
    obj-$(CONFIG_USB_CDNS3) += cdns3.o
    ifneq ($(CONFIG_DEBUG_FS),)
    cdns3-y += debugfs.o
    endif

    cdns3-$(CONFIG_USB_CDNS3_GADGET) += gadget.o ep0.o
    cdns3-$(CONFIG_USB_CDNS3_HOST) += host.o
    obj-$(CONFIG_USB_CDNS3_PCI_WRAP) += cdns3-pci-wrap.o
    obj-$(CONFIG_USB_CDNS3_IMX_WRAP) += cdns3-imx.o

    and below is the diff:

    diff --git a/drivers/usb/cdns3/Makefile b/drivers/usb/cdns3/Makefile
    index 3f63baa24294..d1bca2829f57 100644
    --- a/drivers/usb/cdns3/Makefile
    +++ b/drivers/usb/cdns3/Makefile
    @@ -2,15 +2,13 @@
    # define_trace.h needs to know how to find our header
    CFLAGS_trace.o := -I$(src)

    -obj-$(CONFIG_USB_CDNS3) += cdns3.o
    -obj-$(CONFIG_USB_CDNS3_PCI_WRAP) += cdns3-pci.o
    -
    cdns3-y := core.o drd.o trace.o
    -
    +obj-$(CONFIG_USB_CDNS3) += cdns3.o
    ifneq ($(CONFIG_DEBUG_FS),)
    cdns3-y += debugfs.o
    endif

    cdns3-$(CONFIG_USB_CDNS3_GADGET) += gadget.o ep0.o
    cdns3-$(CONFIG_USB_CDNS3_HOST) += host.o
    -cdns3-pci-y := cdns3-pci-wrap.o
    +obj-$(CONFIG_USB_CDNS3_PCI_WRAP) += cdns3-pci-wrap.o
    +obj-$(CONFIG_USB_CDNS3_IMX_WRAP) += cdns3-imx.o

    > diff --git a/drivers/usb/cdns3/drd.c b/drivers/usb/cdns3/drd.c
    > new file mode 100644
    > index 000000000000..b0c32302eb0b
    > --- /dev/null
    > +++ b/drivers/usb/cdns3/drd.c
    > @@ -0,0 +1,350 @@
    > +// SPDX-License-Identifier: GPL-2.0
    > +/*
    > + * Cadence USBSS DRD Driver.
    > + *
    > + * Copyright (C) 2018 Cadence.
    > + *
    > + * Author: Pawel Laszczak <pawell@cadence.com
    > + *
    > + */
    > +#include <linux/kernel.h>
    > +#include <linux/interrupt.h>
    > +#include <linux/delay.h>
    > +#include <linux/usb/otg.h>
    > +
    > +#include "gadget.h"
    > +#include "drd.h"
    > +#include "core.h"
    > +
    > +static int cdns3_drd_switch_gadget(struct cdns3 *cdns, int on);
    > +static int cdns3_drd_switch_host(struct cdns3 *cdns, int on);
    > +
    > +/**
    > + * cdns3_set_mode - change mode of OTG Core
    > + * @cdns: pointer to context structure
    > + * @mode: selected mode from cdns_role
    > + */
    > +void cdns3_set_mode(struct cdns3 *cdns, enum usb_dr_mode mode)
    > +{
    > + u32 reg;
    > +
    > + cdns->current_dr_mode = mode;
    > +
    > + switch (mode) {
    > + case USB_DR_MODE_PERIPHERAL:
    > + dev_info(cdns->dev, "Set controller to Gadget mode\n");
    > + cdns3_drd_switch_gadget(cdns, 1);
    > + break;
    > + case USB_DR_MODE_HOST:
    > + dev_info(cdns->dev, "Set controller to Host mode\n");
    > + cdns3_drd_switch_host(cdns, 1);
    > + break;
    > + case USB_DR_MODE_OTG:
    > + dev_info(cdns->dev, "Set controller to OTG mode\n");
    > + if (cdns->version == CDNS3_CONTROLLER_V1) {
    > + reg = readl(&cdns->otg_v1_regs->override);
    > + reg |= OVERRIDE_IDPULLUP;
    > + writel(reg, &cdns->otg_v1_regs->override);
    > + } else {
    > + reg = readl(&cdns->otg_v0_regs->ctrl1);
    > + reg |= OVERRIDE_IDPULLUP_V0;
    > + writel(reg, &cdns->otg_v0_regs->ctrl1);
    > + }
    > +
    > + /*
    > + * Hardware specification says: "ID_VALUE must be valid within
    > + * 50ms after idpullup is set to '1" so driver must wait
    > + * 50ms before reading this pin.
    > + */
    > + usleep_range(50000, 60000);
    > + break;
    > + default:
    > + cdns->current_dr_mode = USB_DR_MODE_UNKNOWN;
    > + dev_err(cdns->dev, "Unsupported mode of operation %d\n", mode);
    > + return;
    > + }
    > +}

    I suggest adding return value since switch may fail.


    > +/**
    > + * cdns3_init_otg_mode - initialize drd controller
    > + * @cdns: Pointer to controller context structure
    > + *
    > + * Returns 0 on success otherwise negative errno
    > + */
    > +static void cdns3_init_otg_mode(struct cdns3 *cdns)

    You may add return value for this function too like your comment.

    > +{
    > + cdns3_otg_disable_irq(cdns);
    > + /* clear all interrupts */
    > + writel(~0, &cdns->otg_regs->ivect);
    > +
    > + cdns3_set_mode(cdns, USB_DR_MODE_OTG);

    return value
    > +
    > + if (cdns3_is_host(cdns))
    > + cdns3_drd_switch_host(cdns, 1);

    ditto

    > + else
    > + cdns3_drd_switch_gadget(cdns, 1);

    ditto
    > +
    > + cdns3_otg_enable_irq(cdns);
    > +}
    > +
    > +/**
    > + * cdns3_drd_update_mode - initialize mode of operation
    > + * @cdns: Pointer to controller context structure
    > + *
    > + * Returns 0 on success otherwise negative errno
    > + */
    > +int cdns3_drd_update_mode(struct cdns3 *cdns)
    > +{
    > + int ret = 0;
    > +
    > + if (cdns->desired_dr_mode == cdns->current_dr_mode)
    > + return ret;
    > +
    > + cdns3_drd_switch_gadget(cdns, 0);

    return value

    > + cdns3_drd_switch_host(cdns, 0);

    ditto
    > +
    > + switch (cdns->desired_dr_mode) {
    > + case USB_DR_MODE_PERIPHERAL:
    > + cdns3_set_mode(cdns, USB_DR_MODE_PERIPHERAL);

    ditto

    > + break;
    > + case USB_DR_MODE_HOST:
    > + cdns3_set_mode(cdns, USB_DR_MODE_HOST);

    ditto
    > + break;
    > + case USB_DR_MODE_OTG:
    > + cdns3_init_otg_mode(cdns);

    ditto
    > + break;
    > + default:
    > + dev_err(cdns->dev, "Unsupported mode of operation %d\n",
    > + cdns->dr_mode);
    > + return -EINVAL;
    > + }
    > +
    > + return ret;
    > +}
    > +
    > +/**
    > + * cdns3_drd_irq - interrupt handler for OTG events
    > + *
    > + * @irq: irq number for cdns3 core device
    > + * @data: structure of cdns3
    > + *
    > + * Returns IRQ_HANDLED or IRQ_NONE
    > + */
    > +static irqreturn_t cdns3_drd_irq(int irq, void *data)
    > +{
    > + irqreturn_t ret = IRQ_NONE;
    > + struct cdns3 *cdns = data;
    > + u32 reg;
    > +
    > + if (cdns->dr_mode != USB_DR_MODE_OTG)
    > + return ret;
    > +
    > + reg = readl(&cdns->otg_regs->ivect);
    > +
    > + if (!reg)
    > + return ret;
    > +
    > + if (reg & OTGIEN_ID_CHANGE_INT) {
    > + dev_dbg(cdns->dev, "OTG IRQ: new ID: %d\n",
    > + cdns3_get_id(cdns));
    > +
    > + queue_work(system_freezable_wq, &cdns->role_switch_wq);
    > +
    > + ret = IRQ_HANDLED;
    > + }
    > +
    > + writel(~0, &cdns->otg_regs->ivect);
    > + return ret;
    > +}
    > +
    > +int cdns3_drd_init(struct cdns3 *cdns)
    > +{
    > + void __iomem *regs;
    > + int ret = 0;
    > + u32 state;
    > +
    > + regs = devm_ioremap_resource(cdns->dev, &cdns->otg_res);
    > + if (IS_ERR(regs))
    > + return PTR_ERR(regs);
    > +
    > + /* Detection of DRD version. Controller has been released
    > + * in two versions. Both are similar, but they have same changes
    > + * in register maps.
    > + * The first register in old version is command register and it's read
    > + * only, so driver should read 0 from it. On the other hand, in v1
    > + * the first register contains device ID number which is not set to 0.
    > + * Driver uses this fact to detect the proper version of
    > + * controller.
    > + */
    > + cdns->otg_v0_regs = regs;
    > + if (!readl(&cdns->otg_v0_regs->cmd)) {
    > + cdns->version = CDNS3_CONTROLLER_V0;
    > + cdns->otg_v1_regs = NULL;
    > + cdns->otg_regs = regs;
    > + dev_info(cdns->dev, "DRD version v0 (%08x)\n",
    > + readl(&cdns->otg_v0_regs->version));
    > + } else {
    > + cdns->otg_v0_regs = NULL;
    > + cdns->otg_v1_regs = regs;
    > + cdns->otg_regs = (void *)&cdns->otg_v1_regs->cmd;
    > + cdns->version = CDNS3_CONTROLLER_V1;
    > + dev_info(cdns->dev, "DRD version v1 (ID: %08x, rev: %08x)\n",
    > + readl(&cdns->otg_v1_regs->did),
    > + readl(&cdns->otg_v1_regs->rid));
    > + }
    > +
    > + state = OTGSTS_STRAP(readl(&cdns->otg_regs->sts));
    > +
    > + /* Update dr_mode according to STRAP configuration. */
    > + cdns->dr_mode = USB_DR_MODE_OTG;
    > + if (state == OTGSTS_STRAP_HOST) {
    > + dev_info(cdns->dev, "Controller strapped to HOST\n");
    > + cdns->dr_mode = USB_DR_MODE_HOST;
    > + } else if (state == OTGSTS_STRAP_GADGET) {
    > + dev_info(cdns->dev, "Controller strapped to PERIPHERAL\n");
    > + cdns->dr_mode = USB_DR_MODE_PERIPHERAL;
    > + }
    > +
    > + cdns->desired_dr_mode = cdns->dr_mode;
    > + cdns->current_dr_mode = USB_DR_MODE_UNKNOWN;
    > +
    > + ret = devm_request_threaded_irq(cdns->dev, cdns->irq, cdns3_drd_irq,
    > + NULL, IRQF_SHARED,
    > + dev_name(cdns->dev), cdns);
    > +
    > + if (ret)
    > + return ret;
    > +
    > + state = readl(&cdns->otg_regs->sts);
    > + if (OTGSTS_OTG_NRDY(state) != 0) {
    > + dev_err(cdns->dev, "Cadence USB3 OTG device not ready\n");
    > + return -ENODEV;
    > + }
    > +
    > + ret = cdns3_drd_update_mode(cdns);
    > +

    Calling this function, it is timeout for waiting OTGSTS_XHCI_READY at otgsts,
    do you know possible reasons? After commenting out this function, my
    xHCI function
    works.

    Peter

    > + return ret;
    > +}
    > +
    > +int cdns3_drd_exit(struct cdns3 *cdns)
    > +{
    > + return cdns3_drd_switch_host(cdns, 0);
    > +}
    > diff --git a/drivers/usb/cdns3/drd.h b/drivers/usb/cdns3/drd.h
    > new file mode 100644
    > index 000000000000..6a29cdcb492d
    > --- /dev/null
    > +++ b/drivers/usb/cdns3/drd.h
    > @@ -0,0 +1,162 @@
    > +/* SPDX-License-Identifier: GPL-2.0 */
    > +/*
    > + * Cadence USB3 DRD header file.
    > + *
    > + * Copyright (C) 2018 Cadence.
    > + *
    > + * Author: Pawel Laszczak <pawell@cadence.com>
    > + */
    > +#ifndef __LINUX_CDNS3_DRD
    > +#define __LINUX_CDNS3_DRD
    > +
    > +#include <linux/usb/otg.h>
    > +#include <linux/phy/phy.h>
    > +#include "core.h"
    > +
    > +/* DRD register interface for version v1. */
    > +struct cdns3_otg_regs {
    > + __le32 did;
    > + __le32 rid;
    > + __le32 capabilities;
    > + __le32 reserved1;
    > + __le32 cmd;
    > + __le32 sts;
    > + __le32 state;
    > + __le32 reserved2;
    > + __le32 ien;
    > + __le32 ivect;
    > + __le32 refclk;
    > + __le32 tmr;
    > + __le32 reserved3[4];
    > + __le32 simulate;
    > + __le32 override;
    > + __le32 susp_ctrl;
    > + __le32 reserved4;
    > + __le32 anasts;
    > + __le32 adp_ramp_time;
    > + __le32 ctrl1;
    > + __le32 ctrl2;
    > +};
    > +
    > +/* DRD register interface for version v0. */
    > +struct cdns3_otg_legacy_regs {
    > + __le32 cmd;
    > + __le32 sts;
    > + __le32 state;
    > + __le32 refclk;
    > + __le32 ien;
    > + __le32 ivect;
    > + __le32 reserved1[3];
    > + __le32 tmr;
    > + __le32 reserved2[2];
    > + __le32 version;
    > + __le32 capabilities;
    > + __le32 reserved3[2];
    > + __le32 simulate;
    > + __le32 reserved4[5];
    > + __le32 ctrl1;
    > +};
    > +
    > +/*
    > + * Common registers interface for both version of DRD.
    > + */
    > +struct cdns3_otg_common_regs {
    > + __le32 cmd;
    > + __le32 sts;
    > + __le32 state;
    > + __le32 different1;
    > + __le32 ien;
    > + __le32 ivect;
    > +};
    > +
    > +/* CDNS_RID - bitmasks */
    > +#define CDNS_RID(p) ((p) & GENMASK(15, 0))
    > +
    > +/* CDNS_VID - bitmasks */
    > +#define CDNS_DID(p) ((p) & GENMASK(31, 0))
    > +
    > +/* OTGCMD - bitmasks */
    > +/* "Request the bus for Device mode. */
    > +#define OTGCMD_DEV_BUS_REQ BIT(0)
    > +/* Request the bus for Host mode */
    > +#define OTGCMD_HOST_BUS_REQ BIT(1)
    > +/* Enable OTG mode. */
    > +#define OTGCMD_OTG_EN BIT(2)
    > +/* Disable OTG mode */
    > +#define OTGCMD_OTG_DIS BIT(3)
    > +/*"Configure OTG as A-Device. */
    > +#define OTGCMD_A_DEV_EN BIT(4)
    > +/*"Configure OTG as A-Device. */
    > +#define OTGCMD_A_DEV_DIS BIT(5)
    > +/* Drop the bus for Device mod e. */
    > +#define OTGCMD_DEV_BUS_DROP BIT(8)
    > +/* Drop the bus for Host mode*/
    > +#define OTGCMD_HOST_BUS_DROP BIT(9)
    > +/* Power Down USBSS-DEV. */
    > +#define OTGCMD_DEV_POWER_OFF BIT(11)
    > +/* Power Down CDNSXHCI. */
    > +#define OTGCMD_HOST_POWER_OFF BIT(12)
    > +
    > +/* OTGIEN - bitmasks */
    > +/* ID change interrupt enable */
    > +#define OTGIEN_ID_CHANGE_INT BIT(0)
    > +/* Vbusvalid fall detected interrupt enable.*/
    > +#define OTGIEN_VBUSVALID_RISE_INT BIT(4)
    > +/* Vbusvalid fall detected interrupt enable */
    > +#define OTGIEN_VBUSVALID_FALL_INT BIT(5)
    > +
    > +/* OTGSTS - bitmasks */
    > +/*
    > + * Current value of the ID pin. It is only valid when idpullup in
    > + * OTGCTRL1_TYPE register is set to '1'.
    > + */
    > +#define OTGSTS_ID_VALUE BIT(0)
    > +/* Current value of the vbus_valid */
    > +#define OTGSTS_VBUS_VALID BIT(1)
    > +/* Current value of the b_sess_vld */
    > +#define OTGSTS_SESSION_VALID BIT(2)
    > +/*Device mode is active*/
    > +#define OTGSTS_DEV_ACTIVE BIT(3)
    > +/* Host mode is active. */
    > +#define OTGSTS_HOST_ACTIVE BIT(4)
    > +/* OTG Controller not ready. */
    > +#define OTGSTS_OTG_NRDY_MASK BIT(11)
    > +#define OTGSTS_OTG_NRDY(p) ((p) & OTGSTS_OTG_NRDY_MASK)
    > +/*
    > + * Value of the strap pins.
    > + * 000 - no default configuration
    > + * 010 - Controller initiall configured as Host
    > + * 100 - Controller initially configured as Device
    > + */
    > +#define OTGSTS_STRAP(p) (((p) & GENMASK(14, 12)) >> 12)
    > +#define OTGSTS_STRAP_NO_DEFAULT_CFG 0x00
    > +#define OTGSTS_STRAP_HOST_OTG 0x01
    > +#define OTGSTS_STRAP_HOST 0x02
    > +#define OTGSTS_STRAP_GADGET 0x04
    > +/* Host mode is turned on. */
    > +#define OTGSTS_XHCI_READY BIT(26)
    > +/* "Device mode is turned on .*/
    > +#define OTGSTS_DEV_READY BIT(27)
    > +
    > +/* OTGSTATE- bitmasks */
    > +#define OTGSTATE_HOST_STATE_MASK GENMASK(5, 3)
    > +#define OTGSTATE_HOST_STATE_IDLE 0x0
    > +#define OTGSTATE_HOST_STATE_VBUS_FALL 0x7
    > +#define OTGSTATE_HOST_STATE(p) (((p) & OTGSTATE_HOST_STATE_MASK) >> 3)
    > +
    > +/* OTGREFCLK - bitmasks */
    > +#define OTGREFCLK_STB_CLK_SWITCH_EN BIT(31)
    > +
    > +/* OVERRIDE - bitmasks */
    > +#define OVERRIDE_IDPULLUP BIT(0)
    > +/* Only for CDNS3_CONTROLLER_V0 version */
    > +#define OVERRIDE_IDPULLUP_V0 BIT(24)
    > +
    > +int cdns3_is_host(struct cdns3 *cdns);
    > +int cdns3_is_device(struct cdns3 *cdns);
    > +int cdns3_get_id(struct cdns3 *cdns);
    > +int cdns3_drd_init(struct cdns3 *cdns);
    > +int cdns3_drd_exit(struct cdns3 *cdns);
    > +int cdns3_drd_update_mode(struct cdns3 *cdns);
    > +
    > +#endif /* __LINUX_CDNS3_DRD */
    > diff --git a/drivers/usb/cdns3/ep0.c b/drivers/usb/cdns3/ep0.c
    > new file mode 100644
    > index 000000000000..89cf1cde1555
    > --- /dev/null
    > +++ b/drivers/usb/cdns3/ep0.c
    > @@ -0,0 +1,896 @@
    > +// SPDX-License-Identifier: GPL-2.0
    > +/*
    > + * Cadence USBSS DRD Driver - gadget side.
    > + *
    > + * Copyright (C) 2018 Cadence Design Systems.
    > + * Copyright (C) 2017-2018 NXP
    > + *
    > + * Authors: Pawel Jez <pjez@cadence.com>,
    > + * Pawel Laszczak <pawell@cadence.com>
    > + * Peter Chen <peter.chen@nxp.com>
    > + */
    > +
    > +#include <linux/usb/composite.h>
    > +
    > +#include "gadget.h"
    > +#include "trace.h"
    > +
    > +static struct usb_endpoint_descriptor cdns3_gadget_ep0_desc = {
    > + .bLength = USB_DT_ENDPOINT_SIZE,
    > + .bDescriptorType = USB_DT_ENDPOINT,
    > + .bmAttributes = USB_ENDPOINT_XFER_CONTROL,
    > +};
    > +
    > +/**
    > + * cdns3_ep0_run_transfer - Do transfer on default endpoint hardware
    > + * @priv_dev: extended gadget object
    > + * @dma_addr: physical address where data is/will be stored
    > + * @length: data length
    > + * @erdy: set it to 1 when ERDY packet should be sent -
    > + * exit from flow control state
    > + */
    > +static void cdns3_ep0_run_transfer(struct cdns3_device *priv_dev,
    > + dma_addr_t dma_addr,
    > + unsigned int length, int erdy)
    > +{
    > + struct cdns3_usb_regs __iomem *regs = priv_dev->regs;
    > + struct cdns3_endpoint *priv_ep = priv_dev->eps[0];
    > +
    > + priv_ep->trb_pool->buffer = TRB_BUFFER(dma_addr);
    > + priv_ep->trb_pool->length = TRB_LEN(length);
    > + priv_ep->trb_pool->control = TRB_CYCLE | TRB_IOC | TRB_TYPE(TRB_NORMAL);
    > +
    > + trace_cdns3_prepare_trb(priv_ep, priv_ep->trb_pool);
    > +
    > + cdns3_select_ep(priv_dev, priv_dev->ep0_data_dir);
    > +
    > + writel(EP_STS_TRBERR, &regs->ep_sts);
    > + writel(EP_TRADDR_TRADDR(priv_ep->trb_pool_dma), &regs->ep_traddr);
    > + trace_cdns3_doorbell_ep0(priv_dev->ep0_data_dir ? "ep0in" : "ep0out",
    > + readl(&regs->ep_traddr));
    > +
    > + /* TRB should be prepared before starting transfer */
    > + writel(EP_CMD_DRDY, &regs->ep_cmd);
    > +
    > + if (erdy)
    > + writel(EP_CMD_ERDY, &priv_dev->regs->ep_cmd);
    > +}
    > +
    > +/**
    > + * cdns3_ep0_delegate_req - Returns status of handling setup packet
    > + * Setup is handled by gadget driver
    > + * @priv_dev: extended gadget object
    > + * @ctrl_req: pointer to received setup packet
    > + *
    > + * Returns zero on success or negative value on failure
    > + */
    > +static int cdns3_ep0_delegate_req(struct cdns3_device *priv_dev,
    > + struct usb_ctrlrequest *ctrl_req)
    > +{
    > + int ret;
    > +
    > + spin_unlock(&priv_dev->lock);
    > + priv_dev->setup_pending = 1;
    > + ret = priv_dev->gadget_driver->setup(&priv_dev->gadget, ctrl_req);
    > + priv_dev->setup_pending = 0;
    > + spin_lock(&priv_dev->lock);
    > + return ret;
    > +}
    > +
    > +static void cdns3_prepare_setup_packet(struct cdns3_device *priv_dev)
    > +{
    > + priv_dev->ep0_data_dir = 0;
    > + priv_dev->ep0_stage = CDNS3_SETUP_STAGE;
    > + cdns3_ep0_run_transfer(priv_dev, priv_dev->setup_dma,
    > + sizeof(struct usb_ctrlrequest), 0);
    > +}
    > +
    > +static void cdns3_ep0_complete_setup(struct cdns3_device *priv_dev,
    > + u8 send_stall, u8 send_erdy)
    > +{
    > + struct cdns3_endpoint *priv_ep = priv_dev->eps[0];
    > + struct usb_request *request;
    > +
    > + request = cdns3_next_request(&priv_ep->pending_req_list);
    > + if (request)
    > + list_del_init(&request->list);
    > +
    > + if (send_stall) {
    > + dev_dbg(priv_dev->dev, "STALL for ep0\n");
    > + /* set_stall on ep0 */
    > + cdns3_select_ep(priv_dev, 0x00);
    > + writel(EP_CMD_SSTALL, &priv_dev->regs->ep_cmd);
    > + } else {
    > + cdns3_prepare_setup_packet(priv_dev);
    > + }
    > +
    > + priv_dev->ep0_stage = CDNS3_SETUP_STAGE;
    > + writel((send_erdy ? EP_CMD_ERDY : 0) | EP_CMD_REQ_CMPL,
    > + &priv_dev->regs->ep_cmd);
    > +}
    > +
    > +/**
    > + * cdns3_req_ep0_set_configuration - Handling of SET_CONFIG standard USB request
    > + * @priv_dev: extended gadget object
    > + * @ctrl_req: pointer to received setup packet
    > + *
    > + * Returns 0 if success, USB_GADGET_DELAYED_STATUS on deferred status stage,
    > + * error code on error
    > + */
    > +static int cdns3_req_ep0_set_configuration(struct cdns3_device *priv_dev,
    > + struct usb_ctrlrequest *ctrl_req)
    > +{
    > + enum usb_device_state device_state = priv_dev->gadget.state;
    > + struct cdns3_endpoint *priv_ep;
    > + u32 config = le16_to_cpu(ctrl_req->wValue);
    > + int result = 0;
    > + int i;
    > +
    > + switch (device_state) {
    > + case USB_STATE_ADDRESS:
    > + /* Configure non-control EPs */
    > + for (i = 0; i < CDNS3_ENDPOINTS_MAX_COUNT; i++) {
    > + priv_ep = priv_dev->eps[i];
    > + if (!priv_ep)
    > + continue;
    > +
    > + if (priv_ep->flags & EP_CLAIMED)
    > + cdns3_ep_config(priv_ep);
    > + }
    > +
    > + result = cdns3_ep0_delegate_req(priv_dev, ctrl_req);
    > +
    > + if (result)
    > + return result;
    > +
    > + if (config) {
    > + cdns3_set_hw_configuration(priv_dev);
    > + } else {
    > + cdns3_hw_reset_eps_config(priv_dev);
    > + usb_gadget_set_state(&priv_dev->gadget,
    > + USB_STATE_ADDRESS);
    > + }
    > + break;
    > + case USB_STATE_CONFIGURED:
    > + result = cdns3_ep0_delegate_req(priv_dev, ctrl_req);
    > +
    > + if (!config && !result) {
    > + cdns3_hw_reset_eps_config(priv_dev);
    > + usb_gadget_set_state(&priv_dev->gadget,
    > + USB_STATE_ADDRESS);
    > + }
    > + break;
    > + default:
    > + result = -EINVAL;
    > + }
    > +
    > + return result;
    > +}
    > +
    > +/**
    > + * cdns3_req_ep0_set_address - Handling of SET_ADDRESS standard USB request
    > + * @priv_dev: extended gadget object
    > + * @ctrl_req: pointer to received setup packet
    > + *
    > + * Returns 0 if success, error code on error
    > + */
    > +static int cdns3_req_ep0_set_address(struct cdns3_device *priv_dev,
    > + struct usb_ctrlrequest *ctrl_req)
    > +{
    > + enum usb_device_state device_state = priv_dev->gadget.state;
    > + u32 reg;
    > + u32 addr;
    > +
    > + addr = le16_to_cpu(ctrl_req->wValue);
    > +
    > + if (addr > USB_DEVICE_MAX_ADDRESS) {
    > + dev_err(priv_dev->dev,
    > + "Device address (%d) cannot be greater than %d\n",
    > + addr, USB_DEVICE_MAX_ADDRESS);
    > + return -EINVAL;
    > + }
    > +
    > + if (device_state == USB_STATE_CONFIGURED) {
    > + dev_err(priv_dev->dev,
    > + "can't set_address from configured state\n");
    > + return -EINVAL;
    > + }
    > +
    > + reg = readl(&priv_dev->regs->usb_cmd);
    > +
    > + writel(reg | USB_CMD_FADDR(addr) | USB_CMD_SET_ADDR,
    > + &priv_dev->regs->usb_cmd);
    > +
    > + usb_gadget_set_state(&priv_dev->gadget,
    > + (addr ? USB_STATE_ADDRESS : USB_STATE_DEFAULT));
    > +
    > + return 0;
    > +}
    > +
    > +/**
    > + * cdns3_req_ep0_get_status - Handling of GET_STATUS standard USB request
    > + * @priv_dev: extended gadget object
    > + * @ctrl_req: pointer to received setup packet
    > + *
    > + * Returns 0 if success, error code on error
    > + */
    > +static int cdns3_req_ep0_get_status(struct cdns3_device *priv_dev,
    > + struct usb_ctrlrequest *ctrl)
    > +{
    > + __le16 *response_pkt;
    > + u16 usb_status = 0;
    > + u32 recip;
    > + u32 reg;
    > +
    > + recip = ctrl->bRequestType & USB_RECIP_MASK;
    > +
    > + switch (recip) {
    > + case USB_RECIP_DEVICE:
    > + /* self powered */
    > + if (priv_dev->is_selfpowered)
    > + usb_status = BIT(USB_DEVICE_SELF_POWERED);
    > +
    > + if (priv_dev->wake_up_flag)
    > + usb_status |= BIT(USB_DEVICE_REMOTE_WAKEUP);
    > +
    > + if (priv_dev->gadget.speed != USB_SPEED_SUPER)
    > + break;
    > +
    > + reg = readl(&priv_dev->regs->usb_sts);
    > +
    > + if (priv_dev->u1_allowed)
    > + usb_status |= BIT(USB_DEV_STAT_U1_ENABLED);
    > +
    > + if (priv_dev->u2_allowed)
    > + usb_status |= BIT(USB_DEV_STAT_U2_ENABLED);
    > +
    > + break;
    > + case USB_RECIP_INTERFACE:
    > + return cdns3_ep0_delegate_req(priv_dev, ctrl);
    > + case USB_RECIP_ENDPOINT:
    > + /* check if endpoint is stalled */
    > + cdns3_select_ep(priv_dev, ctrl->wIndex);
    > + if (EP_STS_STALL(readl(&priv_dev->regs->ep_sts)))
    > + usb_status = BIT(USB_ENDPOINT_HALT);
    > + break;
    > + default:
    > + return -EINVAL;
    > + }
    > +
    > + response_pkt = (__le16 *)priv_dev->setup_buf;
    > + *response_pkt = cpu_to_le16(usb_status);
    > +
    > + cdns3_ep0_run_transfer(priv_dev, priv_dev->setup_dma,
    > + sizeof(*response_pkt), 1);
    > + return 0;
    > +}
    > +
    > +static int cdns3_ep0_feature_handle_device(struct cdns3_device *priv_dev,
    > + struct usb_ctrlrequest *ctrl,
    > + int set)
    > +{
    > + enum usb_device_state state;
    > + enum usb_device_speed speed;
    > + int ret = 0;
    > + u32 wValue;
    > + u32 wIndex;
    > + u16 tmode;
    > +
    > + wValue = le16_to_cpu(ctrl->wValue);
    > + wIndex = le16_to_cpu(ctrl->wIndex);
    > + state = priv_dev->gadget.state;
    > + speed = priv_dev->gadget.speed;
    > +
    > + switch (ctrl->wValue) {
    > + case USB_DEVICE_REMOTE_WAKEUP:
    > + priv_dev->wake_up_flag = !!set;
    > + break;
    > + case USB_DEVICE_U1_ENABLE:
    > + if (state != USB_STATE_CONFIGURED || speed != USB_SPEED_SUPER)
    > + return -EINVAL;
    > +
    > + priv_dev->u1_allowed = !!set;
    > + break;
    > + case USB_DEVICE_U2_ENABLE:
    > + if (state != USB_STATE_CONFIGURED || speed != USB_SPEED_SUPER)
    > + return -EINVAL;
    > +
    > + priv_dev->u2_allowed = !!set;
    > + break;
    > + case USB_DEVICE_LTM_ENABLE:
    > + ret = -EINVAL;
    > + break;
    > + case USB_DEVICE_TEST_MODE:
    > + if (state != USB_STATE_CONFIGURED || speed > USB_SPEED_HIGH)
    > + return -EINVAL;
    > +
    > + tmode = le16_to_cpu(ctrl->wIndex);
    > +
    > + if (!set || (tmode & 0xff) != 0)
    > + return -EINVAL;
    > +
    > + switch (tmode >> 8) {
    > + case TEST_J:
    > + case TEST_K:
    > + case TEST_SE0_NAK:
    > + case TEST_PACKET:
    > + cdns3_ep0_complete_setup(priv_dev, 0, 1);
    > + /**
    > + * Little delay to give the controller some time
    > + * for sending status stage.
    > + * This time should be less then 3ms.
    > + */
    > + usleep_range(1000, 2000);
    > + cdns3_set_register_bit(&priv_dev->regs->usb_cmd,
    > + USB_CMD_STMODE |
    > + USB_STS_TMODE_SEL(tmode - 1));
    > + break;
    > + default:
    > + ret = -EINVAL;
    > + }
    > + break;
    > + default:
    > + ret = -EINVAL;
    > + }
    > +
    > + return ret;
    > +}
    > +
    > +static int cdns3_ep0_feature_handle_intf(struct cdns3_device *priv_dev,
    > + struct usb_ctrlrequest *ctrl,
    > + int set)
    > +{
    > + u32 wValue;
    > + int ret = 0;
    > +
    > + wValue = le16_to_cpu(ctrl->wValue);
    > +
    > + switch (wValue) {
    > + case USB_INTRF_FUNC_SUSPEND:
    > + break;
    > + default:
    > + ret = -EINVAL;
    > + }
    > +
    > + return ret;
    > +}
    > +
    > +static int cdns3_ep0_feature_handle_endpoint(struct cdns3_device *priv_dev,
    > + struct usb_ctrlrequest *ctrl,
    > + int set)
    > +{
    > + struct cdns3_endpoint *priv_ep;
    > + int ret = 0;
    > + u8 index;
    > +
    > + if (le16_to_cpu(ctrl->wValue) != USB_ENDPOINT_HALT)
    > + return -EINVAL;
    > +
    > + if (!(ctrl->wIndex & ~USB_DIR_IN))
    > + return 0;
    > +
    > + index = cdns3_ep_addr_to_index(ctrl->wIndex);
    > + priv_ep = priv_dev->eps[index];
    > +
    > + cdns3_select_ep(priv_dev, ctrl->wIndex);
    > +
    > + if (set) {
    > + writel(EP_CMD_SSTALL, &priv_dev->regs->ep_cmd);
    > + priv_ep->flags |= EP_STALL;
    > + } else {
    > + struct usb_request *request;
    > +
    > + if (priv_dev->eps[index]->flags & EP_WEDGE) {
    > + cdns3_select_ep(priv_dev, 0x00);
    > + return 0;
    > + }
    > +
    > + writel(EP_CMD_CSTALL | EP_CMD_EPRST, &priv_dev->regs->ep_cmd);
    > +
    > + /* wait for EPRST cleared */
    > + ret = cdns3_handshake(&priv_dev->regs->ep_cmd,
    > + EP_CMD_EPRST, 0, 100);
    > + if (ret)
    > + return -EINVAL;
    > +
    > + priv_ep->flags &= ~EP_STALL;
    > +
    > + request = cdns3_next_request(&priv_ep->pending_req_list);
    > + if (request)
    > + cdns3_ep_run_transfer(priv_ep, request);
    > + }
    > + return ret;
    > +}
    > +
    > +/**
    > + * cdns3_req_ep0_handle_feature -
    > + * Handling of GET/SET_FEATURE standard USB request
    > + *
    > + * @priv_dev: extended gadget object
    > + * @ctrl_req: pointer to received setup packet
    > + * @set: must be set to 1 for SET_FEATURE request
    > + *
    > + * Returns 0 if success, error code on error
    > + */
    > +static int cdns3_req_ep0_handle_feature(struct cdns3_device *priv_dev,
    > + struct usb_ctrlrequest *ctrl,
    > + int set)
    > +{
    > + int ret = 0;
    > + u32 recip;
    > +
    > + recip = ctrl->bRequestType & USB_RECIP_MASK;
    > +
    > + switch (recip) {
    > + case USB_RECIP_DEVICE:
    > + ret = cdns3_ep0_feature_handle_device(priv_dev, ctrl, set);
    > + break;
    > + case USB_RECIP_INTERFACE:
    > + ret = cdns3_ep0_feature_handle_intf(priv_dev, ctrl, set);
    > + break;
    > + case USB_RECIP_ENDPOINT:
    > + ret = cdns3_ep0_feature_handle_endpoint(priv_dev, ctrl, set);
    > + break;
    > + default:
    > + return -EINVAL;
    > + }
    > +
    > + return ret;
    > +}
    > +
    > +/**
    > + * cdns3_req_ep0_set_sel - Handling of SET_SEL standard USB request
    > + * @priv_dev: extended gadget object
    > + * @ctrl_req: pointer to received setup packet
    > + *
    > + * Returns 0 if success, error code on error
    > + */
    > +static int cdns3_req_ep0_set_sel(struct cdns3_device *priv_dev,
    > + struct usb_ctrlrequest *ctrl_req)
    > +{
    > + if (priv_dev->gadget.state < USB_STATE_ADDRESS)
    > + return -EINVAL;
    > +
    > + if (ctrl_req->wLength != 6) {
    > + dev_err(priv_dev->dev, "Set SEL should be 6 bytes, got %d\n",
    > + ctrl_req->wLength);
    > + return -EINVAL;
    > + }
    > +
    > + cdns3_ep0_run_transfer(priv_dev, priv_dev->setup_dma, 6, 1);
    > + return 0;
    > +}
    > +
    > +/**
    > + * cdns3_req_ep0_set_isoch_delay -
    > + * Handling of GET_ISOCH_DELAY standard USB request
    > + * @priv_dev: extended gadget object
    > + * @ctrl_req: pointer to received setup packet
    > + *
    > + * Returns 0 if success, error code on error
    > + */
    > +static int cdns3_req_ep0_set_isoch_delay(struct cdns3_device *priv_dev,
    > + struct usb_ctrlrequest *ctrl_req)
    > +{
    > + if (ctrl_req->wIndex || ctrl_req->wLength)
    > + return -EINVAL;
    > +
    > + priv_dev->isoch_delay = ctrl_req->wValue;
    > +
    > + return 0;
    > +}
    > +
    > +/**
    > + * cdns3_ep0_standard_request - Handling standard USB requests
    > + * @priv_dev: extended gadget object
    > + * @ctrl_req: pointer to received setup packet
    > + *
    > + * Returns 0 if success, error code on error
    > + */
    > +static int cdns3_ep0_standard_request(struct cdns3_device *priv_dev,
    > + struct usb_ctrlrequest *ctrl_req)
    > +{
    > + int ret;
    > +
    > + switch (ctrl_req->bRequest) {
    > + case USB_REQ_SET_ADDRESS:
    > + ret = cdns3_req_ep0_set_address(priv_dev, ctrl_req);
    > + break;
    > + case USB_REQ_SET_CONFIGURATION:
    > + ret = cdns3_req_ep0_set_configuration(priv_dev, ctrl_req);
    > + break;
    > + case USB_REQ_GET_STATUS:
    > + ret = cdns3_req_ep0_get_status(priv_dev, ctrl_req);
    > + break;
    > + case USB_REQ_CLEAR_FEATURE:
    > + ret = cdns3_req_ep0_handle_feature(priv_dev, ctrl_req, 0);
    > + break;
    > + case USB_REQ_SET_FEATURE:
    > + ret = cdns3_req_ep0_handle_feature(priv_dev, ctrl_req, 1);
    > + break;
    > + case USB_REQ_SET_SEL:
    > + ret = cdns3_req_ep0_set_sel(priv_dev, ctrl_req);
    > + break;
    > + case USB_REQ_SET_ISOCH_DELAY:
    > + ret = cdns3_req_ep0_set_isoch_delay(priv_dev, ctrl_req);
    > + break;
    > + default:
    > + ret = cdns3_ep0_delegate_req(priv_dev, ctrl_req);
    > + break;
    > + }
    > +
    > + return ret;
    > +}
    > +
    > +static void __pending_setup_status_handler(struct cdns3_device *priv_dev)
    > +{
    > + struct usb_request *request = priv_dev->pending_status_request;
    > +
    > + if (priv_dev->status_completion_no_call && request &&
    > + request->complete) {
    > + request->complete(&priv_dev->eps[0]->endpoint, request);
    > + priv_dev->status_completion_no_call = 0;
    > + }
    > +}
    > +
    > +void cdns3_pending_setup_status_handler(struct work_struct *work)
    > +{
    > + struct cdns3_device *priv_dev = container_of(work, struct cdns3_device,
    > + pending_status_wq);
    > + unsigned long flags;
    > +
    > + spin_lock_irqsave(&priv_dev->lock, flags);
    > + __pending_setup_status_handler(priv_dev);
    > + spin_unlock_irqrestore(&priv_dev->lock, flags);
    > +}
    > +
    > +/**
    > + * cdns3_gadget_ep_giveback - call struct usb_request's ->complete callback
    > + * @priv_ep: The endpoint to whom the request belongs to
    > + * @priv_req: The request we're giving back
    > + * @status: completion code for the request
    > + *
    > + * Must be called with controller's lock held and interrupts disabled. This
    > + * function will unmap @req and call its ->complete() callback to notify upper
    > + * layers that it has completed.
    > + */
    > +
    > +void cdns3_gadget_ep0_giveback(struct cdns3_device *priv_dev,
    > + int status)
    > +{
    > + struct cdns3_endpoint *priv_ep;
    > + struct usb_request *request;
    > +
    > + priv_ep = priv_dev->eps[0];
    > + request = cdns3_next_request(&priv_ep->pending_req_list);
    > +
    > + priv_ep->dir = priv_dev->ep0_data_dir;
    > + cdns3_gadget_giveback(priv_ep, to_cdns3_request(request), status);
    > +}
    > +
    > +/**
    > + * cdns3_ep0_setup_phase - Handling setup USB requests
    > + * @priv_dev: extended gadget object
    > + */
    > +static void cdns3_ep0_setup_phase(struct cdns3_device *priv_dev)
    > +{
    > + struct usb_ctrlrequest *ctrl = priv_dev->setup_buf;
    > + struct cdns3_endpoint *priv_ep = priv_dev->eps[0];
    > + int result;
    > +
    > + priv_dev->ep0_data_dir = ctrl->bRequestType & USB_DIR_IN;
    > +
    > + trace_cdns3_ctrl_req(ctrl);
    > +
    > + if (!list_empty(&priv_ep->pending_req_list)) {
    > + struct usb_request *request;
    > +
    > + request = cdns3_next_request(&priv_ep->pending_req_list);
    > + priv_ep->dir = priv_dev->ep0_data_dir;
    > + cdns3_gadget_giveback(priv_ep, to_cdns3_request(request),
    > + -ECONNRESET);
    > + }
    > +
    > + if (le16_to_cpu(ctrl->wLength))
    > + priv_dev->ep0_stage = CDNS3_DATA_STAGE;
    > + else
    > + priv_dev->ep0_stage = CDNS3_STATUS_STAGE;
    > +
    > + if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD)
    > + result = cdns3_ep0_standard_request(priv_dev, ctrl);
    > + else
    > + result = cdns3_ep0_delegate_req(priv_dev, ctrl);
    > +
    > + if (priv_dev->ep0_stage == CDNS3_STATUS_STAGE &&
    > + result != USB_GADGET_DELAYED_STATUS) {
    > + cdns3_ep0_complete_setup(priv_dev, 0, 1);
    > + } else if (result < 0) {
    > + cdns3_ep0_complete_setup(priv_dev, 1, 1);
    > + }
    > +}
    > +
    > +static void cdns3_transfer_completed(struct cdns3_device *priv_dev)
    > +{
    > + struct cdns3_endpoint *priv_ep = priv_dev->eps[0];
    > +
    > + if (!list_empty(&priv_ep->pending_req_list)) {
    > + struct usb_request *request;
    > +
    > + trace_cdns3_complete_trb(priv_ep, priv_ep->trb_pool);
    > + request = cdns3_next_request(&priv_ep->pending_req_list);
    > +
    > + request->actual =
    > + TRB_LEN(le32_to_cpu(priv_ep->trb_pool->length));
    > +
    > + priv_ep->dir = priv_dev->ep0_data_dir;
    > + cdns3_gadget_giveback(priv_ep, to_cdns3_request(request), 0);
    > + }
    > +
    > + cdns3_ep0_complete_setup(priv_dev, 0, 0);
    > +}
    > +
    > +/**
    > + * cdns3_check_new_setup - Check if controller receive new SETUP packet.
    > + * @priv_dev: extended gadget object
    > + *
    > + * The SETUP packet can be kept in on-chip memory or in system memory.
    > + */
    > +static bool cdns3_check_new_setup(struct cdns3_device *priv_dev)
    > +{
    > + u32 ep_sts_reg;
    > +
    > + cdns3_select_ep(priv_dev, 0 | USB_DIR_OUT);
    > + ep_sts_reg = readl(&priv_dev->regs->ep_sts);
    > +
    > + return !!(ep_sts_reg & (EP_STS_SETUP | EP_STS_STPWAIT));
    > +}
    > +
    > +/**
    > + * cdns3_check_ep0_interrupt_proceed - Processes interrupt related to endpoint 0
    > + * @priv_dev: extended gadget object
    > + * @dir: USB_DIR_IN for IN direction, USB_DIR_OUT for OUT direction
    > + */
    > +void cdns3_check_ep0_interrupt_proceed(struct cdns3_device *priv_dev, int dir)
    > +{
    > + u32 ep_sts_reg;
    > +
    > + cdns3_select_ep(priv_dev, dir);
    > +
    > + ep_sts_reg = readl(&priv_dev->regs->ep_sts);
    > + writel(ep_sts_reg, &priv_dev->regs->ep_sts);
    > +
    > + trace_cdns3_ep0_irq(priv_dev, ep_sts_reg);
    > +
    > + __pending_setup_status_handler(priv_dev);
    > +
    > + if ((ep_sts_reg & EP_STS_SETUP)) {
    > + cdns3_ep0_setup_phase(priv_dev);
    > + } else if ((ep_sts_reg & EP_STS_IOC) || (ep_sts_reg & EP_STS_ISP)) {
    > + priv_dev->ep0_data_dir = dir;
    > + cdns3_transfer_completed(priv_dev);
    > + }
    > +
    > + if (ep_sts_reg & EP_STS_DESCMIS) {
    > + if (dir == 0 && !priv_dev->setup_pending)
    > + cdns3_prepare_setup_packet(priv_dev);
    > + }
    > +}
    > +
    > +/**
    > + * cdns3_gadget_ep0_enable
    > + * Function shouldn't be called by gadget driver,
    > + * endpoint 0 is allways active
    > + */
    > +static int cdns3_gadget_ep0_enable(struct usb_ep *ep,
    > + const struct usb_endpoint_descriptor *desc)
    > +{
    > + return -EINVAL;
    > +}
    > +
    > +/**
    > + * cdns3_gadget_ep0_disable
    > + * Function shouldn't be called by gadget driver,
    > + * endpoint 0 is allways active
    > + */
    > +static int cdns3_gadget_ep0_disable(struct usb_ep *ep)
    > +{
    > + return -EINVAL;
    > +}
    > +
    > +/**
    > + * cdns3_gadget_ep0_set_halt
    > + * @ep: pointer to endpoint zero object
    > + * @value: 1 for set stall, 0 for clear stall
    > + *
    > + * Returns 0
    > + */
    > +static int cdns3_gadget_ep0_set_halt(struct usb_ep *ep, int value)
    > +{
    > + /* TODO */
    > + return 0;
    > +}
    > +
    > +/**
    > + * cdns3_gadget_ep0_queue Transfer data on endpoint zero
    > + * @ep: pointer to endpoint zero object
    > + * @request: pointer to request object
    > + * @gfp_flags: gfp flags
    > + *
    > + * Returns 0 on success, error code elsewhere
    > + */
    > +static int cdns3_gadget_ep0_queue(struct usb_ep *ep,
    > + struct usb_request *request,
    > + gfp_t gfp_flags)
    > +{
    > + struct cdns3_endpoint *priv_ep = ep_to_cdns3_ep(ep);
    > + struct cdns3_device *priv_dev = priv_ep->cdns3_dev;
    > + unsigned long flags;
    > + int erdy_sent = 0;
    > + int ret = 0;
    > +
    > + dev_dbg(priv_dev->dev, "Queue to Ep0%s L: %d\n",
    > + priv_dev->ep0_data_dir ? "IN" : "OUT",
    > + request->length);
    > +
    > + /* cancel the request if controller receive new SETUP packet. */
    > + if (cdns3_check_new_setup(priv_dev))
    > + return -ECONNRESET;
    > +
    > + /* send STATUS stage. Should be called only for SET_CONFIGURATION */
    > + if (priv_dev->ep0_stage == CDNS3_STATUS_STAGE) {
    > + spin_lock_irqsave(&priv_dev->lock, flags);
    > + cdns3_select_ep(priv_dev, 0x00);
    > +
    > + erdy_sent = !priv_dev->hw_configured_flag;
    > + cdns3_set_hw_configuration(priv_dev);
    > +
    > + if (!erdy_sent)
    > + cdns3_ep0_complete_setup(priv_dev, 0, 1);
    > +
    > + request->actual = 0;
    > + priv_dev->status_completion_no_call = true;
    > + priv_dev->pending_status_request = request;
    > + spin_unlock_irqrestore(&priv_dev->lock, flags);
    > +
    > + /*
    > + * Since there is no completion interrupt for status stage,
    > + * it needs to call ->completion in software after
    > + * ep0_queue is back.
    > + */
    > + queue_work(system_freezable_wq, &priv_dev->pending_status_wq);
    > + return 0;
    > + }
    > +
    > + spin_lock_irqsave(&priv_dev->lock, flags);
    > + if (!list_empty(&priv_ep->pending_req_list)) {
    > + dev_err(priv_dev->dev,
    > + "can't handle multiple requests for ep0\n");
    > + spin_unlock_irqrestore(&priv_dev->lock, flags);
    > + return -EBUSY;
    > + }
    > +
    > + ret = usb_gadget_map_request_by_dev(priv_dev->sysdev, request,
    > + priv_dev->ep0_data_dir);
    > + if (ret) {
    > + spin_unlock_irqrestore(&priv_dev->lock, flags);
    > + dev_err(priv_dev->dev, "failed to map request\n");
    > + return -EINVAL;
    > + }
    > +
    > + request->status = -EINPROGRESS;
    > + list_add_tail(&request->list, &priv_ep->pending_req_list);
    > + cdns3_ep0_run_transfer(priv_dev, request->dma, request->length, 1);
    > + spin_unlock_irqrestore(&priv_dev->lock, flags);
    > +
    > + return ret;
    > +}
    > +
    > +/**
    > + * cdns3_gadget_ep_set_wedge Set wedge on selected endpoint
    > + * @ep: endpoint object
    > + *
    > + * Returns 0
    > + */
    > +int cdns3_gadget_ep_set_wedge(struct usb_ep *ep)
    > +{
    > + struct cdns3_endpoint *priv_ep = ep_to_cdns3_ep(ep);
    > + struct cdns3_device *priv_dev = priv_ep->cdns3_dev;
    > +
    > + dev_dbg(priv_dev->dev, "Wedge for %s\n", ep->name);
    > + cdns3_gadget_ep_set_halt(ep, 1);
    > + priv_ep->flags |= EP_WEDGE;
    > +
    > + return 0;
    > +}
    > +
    > +const struct usb_ep_ops cdns3_gadget_ep0_ops = {
    > + .enable = cdns3_gadget_ep0_enable,
    > + .disable = cdns3_gadget_ep0_disable,
    > + .alloc_request = cdns3_gadget_ep_alloc_request,
    > + .free_request = cdns3_gadget_ep_free_request,
    > + .queue = cdns3_gadget_ep0_queue,
    > + .dequeue = cdns3_gadget_ep_dequeue,
    > + .set_halt = cdns3_gadget_ep0_set_halt,
    > + .set_wedge = cdns3_gadget_ep_set_wedge,
    > +};
    > +
    > +/**
    > + * cdns3_ep0_config - Configures default endpoint
    > + * @priv_dev: extended gadget object
    > + *
    > + * Functions sets parameters: maximal packet size and enables interrupts
    > + */
    > +void cdns3_ep0_config(struct cdns3_device *priv_dev)
    > +{
    > + struct cdns3_usb_regs __iomem *regs;
    > + struct cdns3_endpoint *priv_ep;
    > + u32 max_packet_size = 64;
    > +
    > + regs = priv_dev->regs;
    > +
    > + if (priv_dev->gadget.speed == USB_SPEED_SUPER)
    > + max_packet_size = 512;
    > +
    > + priv_ep = priv_dev->eps[0];
    > +
    > + if (!list_empty(&priv_ep->pending_req_list)) {
    > + struct usb_request *request;
    > +
    > + request = cdns3_next_request(&priv_ep->pending_req_list);
    > + list_del_init(&request->list);
    > + }
    > +
    > + priv_dev->u1_allowed = 0;
    > + priv_dev->u2_allowed = 0;
    > +
    > + priv_dev->gadget.ep0->maxpacket = max_packet_size;
    > + cdns3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(max_packet_size);
    > +
    > + /* init ep out */
    > + cdns3_select_ep(priv_dev, USB_DIR_OUT);
    > +
    > + writel(EP_CFG_ENABLE | EP_CFG_MAXPKTSIZE(max_packet_size),
    > + &regs->ep_cfg);
    > +
    > + writel(EP_STS_EN_SETUPEN | EP_STS_EN_DESCMISEN | EP_STS_EN_TRBERREN,
    > + &regs->ep_sts_en);
    > +
    > + /* init ep in */
    > + cdns3_select_ep(priv_dev, USB_DIR_IN);
    > +
    > + writel(EP_CFG_ENABLE | EP_CFG_MAXPKTSIZE(max_packet_size),
    > + &regs->ep_cfg);
    > +
    > + writel(EP_STS_EN_SETUPEN | EP_STS_EN_TRBERREN, &regs->ep_sts_en);
    > +
    > + cdns3_set_register_bit(&regs->usb_conf, USB_CONF_U1DS | USB_CONF_U2DS);
    > +}
    > +
    > +/**
    > + * cdns3_init_ep0 Initializes software endpoint 0 of gadget
    > + * @priv_dev: extended gadget object
    > + * @ep_priv: extended endpoint object
    > + *
    > + * Returns 0 on success else error code.
    > + */
    > +int cdns3_init_ep0(struct cdns3_device *priv_dev,
    > + struct cdns3_endpoint *priv_ep)
    > +{
    > + sprintf(priv_ep->name, "ep0");
    > +
    > + /* fill linux fields */
    > + priv_ep->endpoint.ops = &cdns3_gadget_ep0_ops;
    > + priv_ep->endpoint.maxburst = 1;
    > + usb_ep_set_maxpacket_limit(&priv_ep->endpoint,
    > + CDNS3_EP0_MAX_PACKET_LIMIT);
    > + priv_ep->endpoint.address = 0;
    > + priv_ep->endpoint.caps.type_control = 1;
    > + priv_ep->endpoint.caps.dir_in = 1;
    > + priv_ep->endpoint.caps.dir_out = 1;
    > + priv_ep->endpoint.name = priv_ep->name;
    > + priv_ep->endpoint.desc = &cdns3_gadget_ep0_desc;
    > + priv_dev->gadget.ep0 = &priv_ep->endpoint;
    > + priv_ep->type = USB_ENDPOINT_XFER_CONTROL;
    > +
    > + return cdns3_allocate_trb_pool(priv_ep);
    > +}
    > diff --git a/drivers/usb/cdns3/gadget-export.h b/drivers/usb/cdns3/gadget-export.h
    > new file mode 100644
    > index 000000000000..577469eee961
    > --- /dev/null
    > +++ b/drivers/usb/cdns3/gadget-export.h
    > @@ -0,0 +1,28 @@
    > +/* SPDX-License-Identifier: GPL-2.0 */
    > +/*
    > + * Cadence USBSS DRD Driver - Gadget Export APIs.
    > + *
    > + * Copyright (C) 2017 NXP
    > + * Copyright (C) 2017-2018 NXP
    > + *
    > + * Authors: Peter Chen <peter.chen@nxp.com>
    > + */
    > +#ifndef __LINUX_CDNS3_GADGET_EXPORT
    > +#define __LINUX_CDNS3_GADGET_EXPORT
    > +
    > +#ifdef CONFIG_USB_CDNS3_GADGET
    > +
    > +int cdns3_gadget_init(struct cdns3 *cdns);
    > +void cdns3_gadget_exit(struct cdns3 *cdns);
    > +#else
    > +
    > +static inline int cdns3_gadget_init(struct cdns3 *cdns)
    > +{
    > + return -ENXIO;
    > +}
    > +
    > +static inline void cdns3_gadget_exit(struct cdns3 *cdns) { }
    > +
    > +#endif
    > +
    > +#endif /* __LINUX_CDNS3_GADGET_EXPORT */
    > diff --git a/drivers/usb/cdns3/gadget.c b/drivers/usb/cdns3/gadget.c
    > new file mode 100644
    > index 000000000000..0d95eb00be37
    > --- /dev/null
    > +++ b/drivers/usb/cdns3/gadget.c
    > @@ -0,0 +1,2102 @@
    > +// SPDX-License-Identifier: GPL-2.0
    > +/*
    > + * Cadence USBSS DRD Driver - gadget side.
    > + *
    > + * Copyright (C) 2018 Cadence Design Systems.
    > + * Copyright (C) 2017-2018 NXP
    > + *
    > + * Authors: Pawel Jez <pjez@cadence.com>,
    > + * Pawel Laszczak <pawell@cadence.com>
    > + * Peter Chen <peter.chen@nxp.com>
    > + */
    > +
    > +#include <linux/dma-mapping.h>
    > +#include <linux/usb/gadget.h>
    > +
    > +#include "core.h"
    > +#include "gadget-export.h"
    > +#include "gadget.h"
    > +
    > +#include "trace.h"
    > +
    > +static int __cdns3_gadget_ep_queue(struct usb_ep *ep,
    > + struct usb_request *request,
    > + gfp_t gfp_flags);
    > +
    > +/**
    > + * cdns3_handshake - spin reading until handshake completes or fails
    > + * @ptr: address of device controller register to be read
    > + * @mask: bits to look at in result of read
    > + * @done: value of those bits when handshake succeeds
    > + * @usec: timeout in microseconds
    > + *
    > + * Returns negative errno, or zero on success
    > + *
    > + * Success happens when the "mask" bits have the specified value (hardware
    > + * handshake done). There are two failure modes: "usec" have passed (major
    > + * hardware flakeout), or the register reads as all-ones (hardware removed).
    > + */
    > +int cdns3_handshake(void __iomem *ptr, u32 mask, u32 done, int usec)
    > +{
    > + u32 result;
    > +
    > + do {
    > + result = readl(ptr);
    > + if (result == ~(u32)0) /* card removed */
    > + return -ENODEV;
    > + result &= mask;
    > + if (result == done)
    > + return 0;
    > + udelay(1);
    > + usec--;
    > + } while (usec > 0);
    > + return -ETIMEDOUT;
    > +}
    > +
    > +/**
    > + * cdns3_set_register_bit - set bit in given register.
    > + * @ptr: address of device controller register to be read and changed
    > + * @mask: bits requested to set
    > + */
    > +void cdns3_set_register_bit(void __iomem *ptr, u32 mask)
    > +{
    > + mask = readl(ptr) | mask;
    > + writel(mask, ptr);
    > +}
    > +
    > +/**
    > + * cdns3_ep_addr_to_index - Macro converts endpoint address to
    > + * index of endpoint object in cdns3_device.eps[] container
    > + * @ep_addr: endpoint address for which endpoint object is required
    > + *
    > + */
    > +u8 cdns3_ep_addr_to_index(u8 ep_addr)
    > +{
    > + return (((ep_addr & 0x7F)) + ((ep_addr & USB_DIR_IN) ? 16 : 0));
    > +}
    > +
    > +/**
    > + * cdns3_next_request - returns next request from list
    > + * @list: list containing requests
    > + *
    > + * Returns request or NULL if no requests in list
    > + */
    > +struct usb_request *cdns3_next_request(struct list_head *list)
    > +{
    > + if (list_empty(list))
    > + return NULL;
    > + return list_first_entry_or_null(list, struct usb_request, list);
    > +}
    > +
    > +/**
    > + * cdns3_next_priv_request - returns next request from list
    > + * @list: list containing requests
    > + *
    > + * Returns request or NULL if no requests in list
    > + */
    > +struct cdns3_request *cdns3_next_priv_request(struct list_head *list)
    > +{
    > + if (list_empty(list))
    > + return NULL;
    > + return list_first_entry_or_null(list, struct cdns3_request, list);
    > +}
    > +
    > +/**
    > + * select_ep - selects endpoint
    > + * @priv_dev: extended gadget object
    > + * @ep: endpoint address
    > + */
    > +void cdns3_select_ep(struct cdns3_device *priv_dev, u32 ep)
    > +{
    > + if (priv_dev->selected_ep == ep)
    > + return;
    > +
    > + priv_dev->selected_ep = ep;
    > + writel(ep, &priv_dev->regs->ep_sel);
    > +}
    > +
    > +dma_addr_t cdns3_trb_virt_to_dma(struct cdns3_endpoint *priv_ep,
    > + struct cdns3_trb *trb)
    > +{
    > + u32 offset = (char *)trb - (char *)priv_ep->trb_pool;
    > +
    > + return priv_ep->trb_pool_dma + offset;
    > +}
    > +
    > +int cdns3_ring_size(struct cdns3_endpoint *priv_ep)
    > +{
    > + switch (priv_ep->type) {
    > + case USB_ENDPOINT_XFER_ISOC:
    > + return TRB_ISO_RING_SIZE;
    > + case USB_ENDPOINT_XFER_CONTROL:
    > + return TRB_CTRL_RING_SIZE;
    > + default:
    > + return TRB_RING_SIZE;
    > + }
    > +}
    > +
    > +/**
    > + * cdns3_allocate_trb_pool - Allocates TRB's pool for selected endpoint
    > + * @priv_ep: endpoint object
    > + *
    > + * Function will return 0 on success or -ENOMEM on allocation error
    > + */
    > +int cdns3_allocate_trb_pool(struct cdns3_endpoint *priv_ep)
    > +{
    > + struct cdns3_device *priv_dev = priv_ep->cdns3_dev;
    > + int ring_size = cdns3_ring_size(priv_ep);
    > + struct cdns3_trb *link_trb;
    > +
    > + if (!priv_ep->trb_pool) {
    > + priv_ep->trb_pool = dma_zalloc_coherent(priv_dev->sysdev,
    > + ring_size,
    > + &priv_ep->trb_pool_dma,
    > + GFP_DMA);
    > + if (!priv_ep->trb_pool)
    > + return -ENOMEM;
    > + } else {
    > + memset(priv_ep->trb_pool, 0, ring_size);
    > + }
    > +
    > + if (!priv_ep->num)
    > + return 0;
    > +
    > + if (!priv_ep->aligned_buff) {
    > + void *buff = dma_alloc_coherent(priv_dev->sysdev,
    > + CDNS3_ALIGNED_BUF_SIZE,
    > + &priv_ep->aligned_dma_addr,
    > + GFP_DMA);
    > +
    > + priv_ep->aligned_buff = buff;
    > + if (!priv_ep->aligned_buff) {
    > + dma_free_coherent(priv_dev->sysdev,
    > + ring_size,
    > + priv_ep->trb_pool,
    > + priv_ep->trb_pool_dma);
    > + priv_ep->trb_pool = NULL;
    > +
    > + return -ENOMEM;
    > + }
    > + }
    > +
    > + priv_ep->num_trbs = ring_size / TRB_SIZE;
    > + /* Initialize the last TRB as Link TRB */
    > + link_trb = (priv_ep->trb_pool + (priv_ep->num_trbs - 1));
    > + link_trb->buffer = TRB_BUFFER(priv_ep->trb_pool_dma);
    > + link_trb->control = TRB_CYCLE | TRB_TYPE(TRB_LINK) |
    > + TRB_CHAIN | TRB_TOGGLE;
    > +
    > + return 0;
    > +}
    > +
    > +static void cdns3_free_trb_pool(struct cdns3_endpoint *priv_ep)
    > +{
    > + struct cdns3_device *priv_dev = priv_ep->cdns3_dev;
    > +
    > + if (priv_ep->trb_pool) {
    > + dma_free_coherent(priv_dev->sysdev,
    > + cdns3_ring_size(priv_ep),
    > + priv_ep->trb_pool, priv_ep->trb_pool_dma);
    > + priv_ep->trb_pool = NULL;
    > + }
    > +
    > + if (priv_ep->aligned_buff) {
    > + dma_free_coherent(priv_dev->sysdev, CDNS3_ALIGNED_BUF_SIZE,
    > + priv_ep->aligned_buff,
    > + priv_ep->aligned_dma_addr);
    > + priv_ep->aligned_buff = NULL;
    > + }
    > +}
    > +
    > +/**
    > + * cdns3_data_flush - flush data at onchip buffer
    > + * @priv_ep: endpoint object
    > + *
    > + * Endpoint must be selected before call to this function
    > + *
    > + * Returns zero on success or negative value on failure
    > + */
    > +static int cdns3_data_flush(struct cdns3_endpoint *priv_ep)
    > +{
    > + struct cdns3_device *priv_dev = priv_ep->cdns3_dev;
    > +
    > + writel(EP_CMD_DFLUSH, &priv_dev->regs->ep_cmd);
    > +
    > + /* wait for DFLUSH cleared */
    > + return cdns3_handshake(&priv_dev->regs->ep_cmd, EP_CMD_DFLUSH, 0, 100);
    > +}
    > +
    > +/**
    > + * cdns3_ep_stall_flush - Stalls and flushes selected endpoint
    > + * @priv_ep: endpoint object
    > + *
    > + * Endpoint must be selected before call to this function
    > + */
    > +static void cdns3_ep_stall_flush(struct cdns3_endpoint *priv_ep)
    > +{
    > + struct cdns3_device *priv_dev = priv_ep->cdns3_dev;
    > +
    > + writel(EP_CMD_DFLUSH | EP_CMD_ERDY | EP_CMD_SSTALL,
    > + &priv_dev->regs->ep_cmd);
    > +
    > + /* wait for DFLUSH cleared */
    > + cdns3_handshake(&priv_dev->regs->ep_cmd, EP_CMD_DFLUSH, 0, 100);
    > + priv_ep->flags |= EP_STALL;
    > +}
    > +
    > +/**
    > + * cdns3_hw_reset_eps_config - reset endpoints configuration kept by controller.
    > + * @priv_dev: extended gadget object
    > + */
    > +void cdns3_hw_reset_eps_config(struct cdns3_device *priv_dev)
    > +{
    > + writel(USB_CONF_CFGRST, &priv_dev->regs->usb_conf);
    > +
    > + cdns3_allow_enable_l1(priv_dev, 0);
    > + priv_dev->hw_configured_flag = 0;
    > + priv_dev->onchip_mem_allocated_size = 0;
    > +}
    > +
    > +/**
    > + * cdns3_ep_inc_trb - increment a trb index.
    > + * @index: Pointer to the TRB index to increment.
    > + * @cs: Cycle state
    > + * @trb_in_seg: number of TRBs in segment
    > + *
    > + * The index should never point to the link TRB. After incrementing,
    > + * if it is point to the link TRB, wrap around to the beginning and revert
    > + * cycle state bit The
    > + * link TRB is always at the last TRB entry.
    > + */
    > +static void cdns3_ep_inc_trb(int *index, u8 *cs, int trb_in_seg)
    > +{
    > + (*index)++;
    > + if (*index == (trb_in_seg - 1)) {
    > + *index = 0;
    > + *cs ^= 1;
    > + }
    > +}
    > +
    > +/**
    > + * cdns3_ep_inc_enq - increment endpoint's enqueue pointer
    > + * @priv_ep: The endpoint whose enqueue pointer we're incrementing
    > + */
    > +static void cdns3_ep_inc_enq(struct cdns3_endpoint *priv_ep)
    > +{
    > + priv_ep->free_trbs--;
    > + cdns3_ep_inc_trb(&priv_ep->enqueue, &priv_ep->pcs, priv_ep->num_trbs);
    > +}
    > +
    > +/**
    > + * cdns3_ep_inc_deq - increment endpoint's dequeue pointer
    > + * @priv_ep: The endpoint whose dequeue pointer we're incrementing
    > + */
    > +static void cdns3_ep_inc_deq(struct cdns3_endpoint *priv_ep)
    > +{
    > + priv_ep->free_trbs++;
    > + cdns3_ep_inc_trb(&priv_ep->dequeue, &priv_ep->ccs, priv_ep->num_trbs);
    > +}
    > +
    > +/**
    > + * cdns3_allow_enable_l1 - enable/disable permits to transition to L1.
    > + * @priv_dev: Extended gadget object
    > + * @enable: Enable/disable permit to transition to L1.
    > + *
    > + * If bit USB_CONF_L1EN is set and device receive Extended Token packet,
    > + * then controller answer with ACK handshake.
    > + * If bit USB_CONF_L1DS is set and device receive Extended Token packet,
    > + * then controller answer with NYET handshake.
    > + */
    > +void cdns3_allow_enable_l1(struct cdns3_device *priv_dev, int enable)
    > +{
    > + if (enable)
    > + writel(USB_CONF_L1EN, &priv_dev->regs->usb_conf);
    > + else
    > + writel(USB_CONF_L1DS, &priv_dev->regs->usb_conf);
    > +}
    > +
    > +enum usb_device_speed cdns3_get_speed(struct cdns3_device *priv_dev)
    > +{
    > + u32 reg;
    > +
    > + reg = readl(&priv_dev->regs->usb_sts);
    > +
    > + if (DEV_SUPERSPEED(reg))
    > + return USB_SPEED_SUPER;
    > + else if (DEV_HIGHSPEED(reg))
    > + return USB_SPEED_HIGH;
    > + else if (DEV_FULLSPEED(reg))
    > + return USB_SPEED_FULL;
    > + else if (DEV_LOWSPEED(reg))
    > + return USB_SPEED_LOW;
    > + return USB_SPEED_UNKNOWN;
    > +}
    > +
    > +/**
    > + * cdns3_start_all_request - add to ring all request not started
    > + * @priv_dev: Extended gadget object
    > + * @priv_ep: The endpoint for whom request will be started.
    > + *
    > + * Returns return ENOMEM if transfer ring i not enough TRBs to start
    > + * all requests.
    > + */
    > +static int cdns3_start_all_request(struct cdns3_device *priv_dev,
    > + struct cdns3_endpoint *priv_ep)
    > +{
    > + struct cdns3_request *priv_req;
    > + struct usb_request *request;
    > + int ret = 0;
    > +
    > + while (!list_empty(&priv_ep->deferred_req_list)) {
    > + request = cdns3_next_request(&priv_ep->deferred_req_list);
    > + priv_req = to_cdns3_request(request);
    > +
    > + ret = cdns3_ep_run_transfer(priv_ep, request);
    > + if (ret)
    > + return ret;
    > +
    > + list_del(&request->list);
    > + list_add_tail(&request->list,
    > + &priv_ep->pending_req_list);
    > + }
    > +
    > + priv_ep->flags &= ~EP_RING_FULL;
    > + return ret;
    > +}
    > +
    > +/**
    > + * cdns3_descmiss_copy_data copy data from internal requests to request queued
    > + * by class driver.
    > + * @priv_ep: extended endpoint object
    > + * @request: request object
    > + */
    > +static void cdns3_descmiss_copy_data(struct cdns3_endpoint *priv_ep,
    > + struct usb_request *request)
    > +{
    > + struct usb_request *descmiss_req;
    > + struct cdns3_request *descmiss_priv_req;
    > +
    > + while (!list_empty(&priv_ep->descmiss_req_list)) {
    > + int chunk_end;
    > + int length;
    > +
    > + descmiss_priv_req =
    > + cdns3_next_priv_request(&priv_ep->descmiss_req_list);
    > + descmiss_req = &descmiss_priv_req->request;
    > +
    > + /* driver can't touch pending request */
    > + if (descmiss_priv_req->flags & REQUEST_PENDING)
    > + break;
    > +
    > + chunk_end = descmiss_priv_req->flags & REQUEST_INTERNAL_CH;
    > + length = request->actual + descmiss_req->actual;
    > +
    > + if (length <= request->length) {
    > + memcpy(&((u8 *)request->buf)[request->actual],
    > + descmiss_req->buf,
    > + descmiss_req->actual);
    > + request->actual = length;
    > + } else {
    > + /* It should never occures */
    > + request->status = -ENOMEM;
    > + }
    > +
    > + list_del_init(&descmiss_priv_req->list);
    > +
    > + kfree(descmiss_req->buf);
    > + cdns3_gadget_ep_free_request(&priv_ep->endpoint, descmiss_req);
    > +
    > + if (!chunk_end)
    > + break;
    > + }
    > +}
    > +
    > +/**
    > + * cdns3_gadget_giveback - call struct usb_request's ->complete callback
    > + * @priv_ep: The endpoint to whom the request belongs to
    > + * @priv_req: The request we're giving back
    > + * @status: completion code for the request
    > + *
    > + * Must be called with controller's lock held and interrupts disabled. This
    > + * function will unmap @req and call its ->complete() callback to notify upper
    > + * layers that it has completed.
    > + */
    > +void cdns3_gadget_giveback(struct cdns3_endpoint *priv_ep,
    > + struct cdns3_request *priv_req,
    > + int status)
    > +{
    > + struct cdns3_device *priv_dev = priv_ep->cdns3_dev;
    > + struct usb_request *request = &priv_req->request;
    > +
    > + list_del_init(&request->list);
    > +
    > + if (request->status == -EINPROGRESS)
    > + request->status = status;
    > +
    > + usb_gadget_unmap_request_by_dev(priv_dev->sysdev, request,
    > + priv_ep->dir);
    > +
    > + priv_req->flags &= ~REQUEST_PENDING;
    > + trace_cdns3_gadget_giveback(priv_req);
    > +
    > + /* WA1: */
    > + if (priv_ep->flags & EP_QUIRK_EXTRA_BUF_EN &&
    > + priv_req->flags & REQUEST_INTERNAL) {
    > + struct usb_request *req;
    > +
    > + req = cdns3_next_request(&priv_ep->deferred_req_list);
    > + request = req;
    > + priv_ep->descmis_req = NULL;
    > +
    > + if (!req)
    > + return;
    > +
    > + cdns3_descmiss_copy_data(priv_ep, req);
    > + if (!(priv_ep->flags & EP_QUIRK_END_TRANSFER) &&
    > + req->length != req->actual) {
    > + /* wait for next part of transfer */
    > + return;
    > + }
    > +
    > + if (req->status == -EINPROGRESS)
    > + req->status = 0;
    > +
    > + list_del_init(&req->list);
    > + cdns3_start_all_request(priv_dev, priv_ep);
    > + }
    > +
    > + /* Start all not pending request */
    > + if (priv_ep->flags & EP_RING_FULL)
    > + cdns3_start_all_request(priv_dev, priv_ep);
    > +
    > + if (request->complete) {
    > + spin_unlock(&priv_dev->lock);
    > + usb_gadget_giveback_request(&priv_ep->endpoint,
    > + request);
    > + spin_lock(&priv_dev->lock);
    > + }
    > +
    > + if (request->buf == priv_dev->zlp_buf)
    > + cdns3_gadget_ep_free_request(&priv_ep->endpoint, request);
    > +}
    > +
    > +/**
    > + * cdns3_ep_run_transfer - start transfer on no-default endpoint hardware
    > + * @priv_ep: endpoint object
    > + *
    > + * Returns zero on success or negative value on failure
    > + */
    > +int cdns3_ep_run_transfer(struct cdns3_endpoint *priv_ep,
    > + struct usb_request *request)
    > +{
    > + struct cdns3_device *priv_dev = priv_ep->cdns3_dev;
    > + struct cdns3_request *priv_req;
    > + struct cdns3_trb *trb;
    > + dma_addr_t trb_dma;
    > + int sg_iter = 0;
    > + u32 first_pcs;
    > + int num_trb;
    > + int address;
    > + int pcs;
    > +
    > + if (priv_ep->type == USB_ENDPOINT_XFER_ISOC)
    > + num_trb = priv_ep->interval;
    > + else
    > + num_trb = request->num_sgs ? request->num_sgs : 1;
    > +
    > + if (num_trb > priv_ep->free_trbs) {
    > + priv_ep->flags |= EP_RING_FULL;
    > + return -ENOBUFS;
    > + }
    > +
    > + priv_req = to_cdns3_request(request);
    > + address = priv_ep->endpoint.desc->bEndpointAddress;
    > +
    > + priv_ep->flags |= EP_PENDING_REQUEST;
    > + trb_dma = request->dma;
    > +
    > + /* must allocate buffer aligned to 8 */
    > + if ((request->dma % 8)) {
    > + if (request->length <= CDNS3_ALIGNED_BUF_SIZE) {
    > + memcpy(priv_ep->aligned_buff, request->buf,
    > + request->length);
    > + trb_dma = priv_ep->aligned_dma_addr;
    > + } else {
    > + return -ENOMEM;
    > + }
    > + }
    > +
    > + trb = priv_ep->trb_pool + priv_ep->enqueue;
    > + priv_req->start_trb = priv_ep->enqueue;
    > + priv_req->trb = trb;
    > +
    > + /* prepare ring */
    > + if ((priv_ep->enqueue + num_trb) >= (priv_ep->num_trbs - 1)) {
    > + /*updating C bt in Link TRB before starting DMA*/
    > + struct cdns3_trb *link_trb = priv_ep->trb_pool +
    > + (priv_ep->num_trbs - 1);
    > + link_trb->control = ((priv_ep->pcs) ? TRB_CYCLE : 0) |
    > + TRB_TYPE(TRB_LINK) | TRB_CHAIN |
    > + TRB_TOGGLE;
    > + }
    > +
    > + first_pcs = priv_ep->pcs ? TRB_CYCLE : 0;
    > +
    > + do {
    > + /* fill TRB */
    > + trb->buffer = TRB_BUFFER(request->num_sgs == 0
    > + ? trb_dma : request->sg[sg_iter].dma_address);
    > +
    > + trb->length = TRB_BURST_LEN(16) |
    > + TRB_LEN(request->num_sgs == 0 ?
    > + request->length : request->sg[sg_iter].length);
    > +
    > + trb->control = TRB_TYPE(TRB_NORMAL);
    > + pcs = priv_ep->pcs ? TRB_CYCLE : 0;
    > +
    > + /*
    > + * first trb should be prepared as last to avoid processing
    > + * transfer to early
    > + */
    > + if (sg_iter != 0)
    > + trb->control |= pcs;
    > +
    > + if (priv_ep->type == USB_ENDPOINT_XFER_ISOC && !priv_ep->dir) {
    > + trb->control |= TRB_IOC | TRB_ISP;
    > + } else {
    > + /* for last element in TD or in SG list */
    > + if (sg_iter == (num_trb - 1) && sg_iter != 0)
    > + trb->control |= pcs | TRB_IOC | TRB_ISP;
    > + }
    > + ++sg_iter;
    > + priv_req->end_trb = priv_ep->enqueue;
    > + cdns3_ep_inc_enq(priv_ep);
    > + trb = priv_ep->trb_pool + priv_ep->enqueue;
    > + } while (sg_iter < num_trb);
    > +
    > + trb = priv_req->trb;
    > +
    > + /*
    > + * Memory barrier = Cycle Bit must be set before trb->length and
    > + * trb->buffer fields.
    > + */
    > + wmb();
    > +
    > + priv_req->flags |= REQUEST_PENDING;
    > +
    > + /* give the TD to the consumer*/
    > + if (sg_iter == 1)
    > + trb->control |= first_pcs | TRB_IOC | TRB_ISP;
    > + else
    > + trb->control |= first_pcs;
    > +
    > + trace_cdns3_prepare_trb(priv_ep, priv_req->trb);
    > + trace_cdns3_ring(priv_ep);
    > +
    > + /* arm transfer on selected endpoint */
    > + cdns3_select_ep(priv_ep->cdns3_dev, address);
    > +
    > + /*
    > + * For DMULT mode we can set address to transfer ring only once after
    > + * enabling endpoint.
    > + */
    > + if (priv_ep->flags & EP_UPDATE_EP_TRBADDR) {
    > + writel(EP_TRADDR_TRADDR(priv_ep->trb_pool_dma),
    > + &priv_dev->regs->ep_traddr);
    > + priv_ep->flags &= ~EP_UPDATE_EP_TRBADDR;
    > + }
    > +
    > + /*clearing TRBERR and EP_STS_DESCMIS before seting DRDY*/
    > + writel(EP_STS_TRBERR | EP_STS_DESCMIS, &priv_dev->regs->ep_sts);
    > + trace_cdns3_doorbell_epx(priv_ep->name,
    > + readl(&priv_dev->regs->ep_traddr));
    > + writel(EP_CMD_DRDY, &priv_dev->regs->ep_cmd);
    > +
    > + return 0;
    > +}
    > +
    > +void cdns3_set_hw_configuration(struct cdns3_device *priv_dev)
    > +{
    > + struct cdns3_endpoint *priv_ep;
    > + struct usb_ep *ep;
    > + int result = 0;
    > +
    > + if (priv_dev->hw_configured_flag)
    > + return;
    > +
    > + writel(USB_CONF_CFGSET, &priv_dev->regs->usb_conf);
    > + writel(EP_CMD_ERDY | EP_CMD_REQ_CMPL, &priv_dev->regs->ep_cmd);
    > +
    > + cdns3_set_register_bit(&priv_dev->regs->usb_conf,
    > + USB_CONF_U1EN | USB_CONF_U2EN);
    > +
    > + /* wait until configuration set */
    > + result = cdns3_handshake(&priv_dev->regs->usb_sts,
    > + USB_STS_CFGSTS_MASK, 1, 100);
    > +
    > + priv_dev->hw_configured_flag = 1;
    > + cdns3_allow_enable_l1(priv_dev, 1);
    > +
    > + list_for_each_entry(ep, &priv_dev->gadget.ep_list, ep_list) {
    > + if (ep->enabled) {
    > + priv_ep = ep_to_cdns3_ep(ep);
    > + cdns3_start_all_request(priv_dev, priv_ep);
    > + }
    > + }
    > +}
    > +
    > +/**
    > + * cdns3_request_handled - check whether request has been handled by DMA
    > + *
    > + * @priv_ep: extended endpoint object.
    > + * @priv_req: request object for checking
    > + *
    > + * Endpoint must be selected before invoking this function.
    > + *
    > + * Returns false if request has not been handled by DMA, else returns true.
    > + *
    > + * SR - start ring
    > + * ER - end ring
    > + * DQ = priv_ep->dequeue - dequeue position
    > + * EQ = priv_ep->enqueue - enqueue position
    > + * ST = priv_req->start_trb - index of first TRB in transfer ring
    > + * ET = priv_req->end_trb - index of last TRB in transfer ring
    > + * CI = current_index - index of processed TRB by DMA.
    > + *
    > + * As first step, function checks if cycle bit for priv_req->start_trb is
    > + * correct.
    > + *
    > + * some rules:
    > + * 1. priv_ep->dequeue never exceed current_index.
    > + * 2 priv_ep->enqueue never exceed priv_ep->dequeue
    > + *
    > + * Then We can split recognition into two parts:
    > + * Case 1 - priv_ep->dequeue < current_index
    > + * SR ... EQ ... DQ ... CI ... ER
    > + * SR ... DQ ... CI ... EQ ... ER
    > + *
    > + * Request has been handled by DMA if ST and ET is between DQ and CI.
    > + *
    > + * Case 2 - priv_ep->dequeue > current_index
    > + * This situation take place when CI go through the LINK TRB at the end of
    > + * transfer ring.
    > + * SR ... CI ... EQ ... DQ ... ER
    > + *
    > + * Request has been handled by DMA if ET is less then CI or
    > + * ET is greater or equal DQ.
    > + */
    > +static bool cdns3_request_handled(struct cdns3_endpoint *priv_ep,
    > + struct cdns3_request *priv_req)
    > +{
    > + struct cdns3_device *priv_dev = priv_ep->cdns3_dev;
    > + struct cdns3_trb *trb = priv_req->trb;
    > + int current_index = 0;
    > + int handled = 0;
    > +
    > + current_index = (readl(&priv_dev->regs->ep_traddr) -
    > + priv_ep->trb_pool_dma) / TRB_SIZE;
    > +
    > + trb = &priv_ep->trb_pool[priv_req->start_trb];
    > +
    > + if ((trb->control & TRB_CYCLE) != priv_ep->ccs)
    > + goto finish;
    > +
    > + if (priv_ep->dequeue < current_index) {
    > + if ((current_index == (priv_ep->num_trbs - 1)) &&
    > + !priv_ep->dequeue)
    > + goto finish;
    > +
    > + if (priv_req->end_trb >= priv_ep->dequeue &&
    > + priv_req->end_trb < current_index)
    > + handled = 1;
    > + } else if (priv_ep->dequeue > current_index) {
    > + if (priv_req->end_trb < current_index ||
    > + priv_req->end_trb >= priv_ep->dequeue)
    > + handled = 1;
    > + }
    > +
    > +finish:
    > + trace_cdns3_request_handled(priv_req, current_index, handled);
    > +
    > + return handled;
    > +}
    > +
    > +static void cdns3_transfer_completed(struct cdns3_device *priv_dev,
    > + struct cdns3_endpoint *priv_ep)
    > +{
    > + struct cdns3_request *priv_req;
    > + struct usb_request *request;
    > + struct cdns3_trb *trb;
    > + int current_trb;
    > +
    > + while (!list_empty(&priv_ep->pending_req_list)) {
    > + request = cdns3_next_request(&priv_ep->pending_req_list);
    > + priv_req = to_cdns3_request(request);
    > +
    > + if (!cdns3_request_handled(priv_ep, priv_req))
    > + return;
    > +
    > + if (request->dma % 8 && priv_ep->dir == USB_DIR_OUT)
    > + memcpy(request->buf, priv_ep->aligned_buff,
    > + request->length);
    > +
    > + trb = priv_ep->trb_pool + priv_ep->dequeue;
    > + trace_cdns3_complete_trb(priv_ep, trb);
    > +
    > + if (trb != priv_req->trb)
    > + dev_warn(priv_dev->dev,
    > + "request_trb=0x%p, queue_trb=0x%p\n",
    > + priv_req->trb, trb);
    > +
    > + request->actual = TRB_LEN(le32_to_cpu(trb->length));
    > + current_trb = priv_req->start_trb;
    > +
    > + while (current_trb != priv_req->end_trb) {
    > + cdns3_ep_inc_deq(priv_ep);
    > + current_trb = priv_ep->dequeue;
    > + }
    > +
    > + cdns3_ep_inc_deq(priv_ep);
    > + cdns3_gadget_giveback(priv_ep, priv_req, 0);
    > + }
    > + priv_ep->flags &= ~EP_PENDING_REQUEST;
    > +}
    > +
    > +/**
    > + * cdns3_descmissing_packet - handles descriptor missing event.
    > + * @priv_dev: extended gadget object
    > + *
    > + * WA1: Controller for OUT endpoints has shared on-chip buffers for all incoming
    > + * packets, including ep0out. It's FIFO buffer, so packets must be handle by DMA
    > + * in correct order. If the first packet in the buffer will not be handled,
    > + * then the following packets directed for other endpoints and functions
    > + * will be blocked.
    > + * Additionally the packets directed to one endpoint can block entire on-chip
    > + * buffers. In this case transfer to other endpoints also will blocked.
    > + *
    > + * To resolve this issue after raising the descriptor missing interrupt
    > + * driver prepares internal usb_request object and use it to arm DMA transfer.
    > + *
    > + * The problematic situation was observed in case when endpoint has been enabled
    > + * but no usb_request were queued. Driver try detects such endpoints and will
    > + * use this workaround only for these endpoint.
    > + *
    > + * Driver use limited number of buffer. This number can be set by macro
    > + * CDNS_WA1_NUM_BUFFERS.
    > + *
    > + * Such blocking situation was observed on ACM gadget. For this function
    > + * host send OUT data packet but ACM function is not prepared for this packet.
    > + *
    > + * It's limitation of controller but maybe this issues should be fixed in
    > + * function driver.
    > + */
    > +static int cdns3_descmissing_packet(struct cdns3_endpoint *priv_ep)
    > +{
    > + struct cdns3_request *priv_req;
    > + struct usb_request *request;
    > +
    > + if (priv_ep->flags & EP_QUIRK_EXTRA_BUF_DET) {
    > + priv_ep->flags &= ~EP_QUIRK_EXTRA_BUF_DET;
    > + priv_ep->flags |= EP_QUIRK_EXTRA_BUF_EN;
    > + }
    > +
    > + request = cdns3_gadget_ep_alloc_request(&priv_ep->endpoint,
    > + GFP_ATOMIC);
    > + if (!request)
    > + return -ENOMEM;
    > +
    > + priv_req = to_cdns3_request(request);
    > + priv_req->flags |= REQUEST_INTERNAL;
    > +
    > + /* if this field is still assigned it indicate that transfer related
    > + * with this request has not been finished yet. Driver in this
    > + * case simply allocate next request and assign flag REQUEST_INTERNAL_CH
    > + * flag to previous one. It will indicate that current request is
    > + * part of the previous one.
    > + */
    > + if (priv_ep->descmis_req)
    > + priv_ep->descmis_req->flags |= REQUEST_INTERNAL_CH;
    > +
    > + priv_req->request.buf = kzalloc(CDNS3_DESCMIS_BUF_SIZE,
    > + GFP_ATOMIC);
    > + if (!priv_req) {
    > + cdns3_gadget_ep_free_request(&priv_ep->endpoint, request);
    > + return -ENOMEM;
    > + }
    > +
    > + priv_req->request.length = CDNS3_DESCMIS_BUF_SIZE;
    > + priv_ep->descmis_req = priv_req;
    > +
    > + __cdns3_gadget_ep_queue(&priv_ep->endpoint,
    > + &priv_ep->descmis_req->request,
    > + GFP_ATOMIC);
    > +
    > + return 0;
    > +}
    > +
    > +/**
    > + * cdns3_check_ep_interrupt_proceed - Processes interrupt related to endpoint
    > + * @priv_ep: endpoint object
    > + *
    > + * Returns 0
    > + */
    > +static int cdns3_check_ep_interrupt_proceed(struct cdns3_endpoint *priv_ep)
    > +{
    > + struct cdns3_device *priv_dev = priv_ep->cdns3_dev;
    > + u32 ep_sts_reg;
    > +
    > + cdns3_select_ep(priv_dev, priv_ep->endpoint.address);
    > +
    > + trace_cdns3_epx_irq(priv_dev, priv_ep);
    > +
    > + ep_sts_reg = readl(&priv_dev->regs->ep_sts);
    > + writel(ep_sts_reg, &priv_dev->regs->ep_sts);
    > +
    > + if ((ep_sts_reg & EP_STS_IOC) || (ep_sts_reg & EP_STS_ISP)) {
    > + if (priv_ep->flags & EP_QUIRK_EXTRA_BUF_EN) {
    > + if (ep_sts_reg & EP_STS_ISP)
    > + priv_ep->flags |= EP_QUIRK_END_TRANSFER;
    > + else
    > + priv_ep->flags &= ~EP_QUIRK_END_TRANSFER;
    > + }
    > + cdns3_transfer_completed(priv_dev, priv_ep);
    > + }
    > +
    > + /*
    > + * For isochronous transfer driver completes request on IOC or on
    > + * TRBERR. IOC appears only when device receive OUT data packet.
    > + * If host disable stream or lost some packet then the only way to
    > + * finish all queued transfer is to do it on TRBERR event.
    > + */
    > + if ((ep_sts_reg & EP_STS_TRBERR) &&
    > + priv_ep->type == USB_ENDPOINT_XFER_ISOC)
    > + cdns3_transfer_completed(priv_dev, priv_ep);
    > +
    > + /*
    > + * WA1: this condition should only be meet when
    > + * priv_ep->flags & EP_QUIRK_EXTRA_BUF_DET or
    > + * priv_ep->flags & EP_QUIRK_EXTRA_BUF_EN.
    > + * In other cases this interrupt will be disabled/
    > + */
    > + if (ep_sts_reg & EP_STS_DESCMIS) {
    > + int err;
    > +
    > + err = cdns3_descmissing_packet(priv_ep);
    > + if (err)
    > + dev_err(priv_dev->dev,
    > + "Failed: No sufficient memory for DESCMIS\n");
    > + }
    > +
    > + return 0;
    > +}
    > +
    > +/**
    > + * cdns3_check_usb_interrupt_proceed - Processes interrupt related to device
    > + * @priv_dev: extended gadget object
    > + * @usb_ists: bitmap representation of device's reported interrupts
    > + * (usb_ists register value)
    > + */
    > +static void cdns3_check_usb_interrupt_proceed(struct cdns3_device *priv_dev,
    > + u32 usb_ists)
    > +{
    > + int speed = 0;
    > +
    > + trace_cdns3_usb_irq(priv_dev, usb_ists);
    > + /* Connection detected */
    > + if (usb_ists & (USB_ISTS_CON2I | USB_ISTS_CONI)) {
    > + speed = cdns3_get_speed(priv_dev);
    > + priv_dev->gadget.speed = speed;
    > + usb_gadget_set_state(&priv_dev->gadget, USB_STATE_POWERED);
    > + cdns3_ep0_config(priv_dev);
    > + }
    > +
    > + /* Disconnection detected */
    > + if (usb_ists & (USB_ISTS_DIS2I | USB_ISTS_DISI)) {
    > + if (priv_dev->gadget_driver &&
    > + priv_dev->gadget_driver->disconnect) {
    > + spin_unlock(&priv_dev->lock);
    > + priv_dev->gadget_driver->disconnect(&priv_dev->gadget);
    > + spin_lock(&priv_dev->lock);
    > + }
    > +
    > + priv_dev->gadget.speed = USB_SPEED_UNKNOWN;
    > + usb_gadget_set_state(&priv_dev->gadget, USB_STATE_NOTATTACHED);
    > + cdns3_hw_reset_eps_config(priv_dev);
    > + }
    > +
    > + /* reset*/
    > + if (usb_ists & (USB_ISTS_UWRESI | USB_ISTS_UHRESI | USB_ISTS_U2RESI)) {
    > + /*read again to check the actuall speed*/
    > + speed = cdns3_get_speed(priv_dev);
    > + usb_gadget_set_state(&priv_dev->gadget, USB_STATE_DEFAULT);
    > + priv_dev->gadget.speed = speed;
    > + cdns3_hw_reset_eps_config(priv_dev);
    > + cdns3_ep0_config(priv_dev);
    > + }
    > +}
    > +
    > +/**
    > + * cdns3_device_irq_handler- interrupt handler for device part of controller
    > + *
    > + * @irq: irq number for cdns3 core device
    > + * @data: structure of cdns3
    > + *
    > + * Returns IRQ_HANDLED or IRQ_NONE
    > + */
    > +static irqreturn_t cdns3_device_irq_handler(int irq, void *data)
    > +{
    > + struct cdns3_device *priv_dev;
    > + struct cdns3 *cdns = data;
    > + irqreturn_t ret = IRQ_NONE;
    > + unsigned long flags;
    > + u32 reg;
    > +
    > + priv_dev = cdns->gadget_dev;
    > + spin_lock_irqsave(&priv_dev->lock, flags);
    > +
    > + /* check USB device interrupt */
    > + reg = readl(&priv_dev->regs->usb_ists);
    > + writel(reg, &priv_dev->regs->usb_ists);
    > +
    > + if (reg) {
    > + cdns3_check_usb_interrupt_proceed(priv_dev, reg);
    > + ret = IRQ_HANDLED;
    > + }
    > +
    > + /* check endpoint interrupt */
    > + reg = readl(&priv_dev->regs->ep_ists);
    > +
    > + if (reg) {
    > + reg = ~reg & readl(&priv_dev->regs->ep_ien);
    > + /* mask deferred interrupt. */
    > + writel(reg, &priv_dev->regs->ep_ien);
    > + ret = IRQ_WAKE_THREAD;
    > + }
    > +
    > + spin_unlock_irqrestore(&priv_dev->lock, flags);
    > + return ret;
    > +}
    > +
    > +/**
    > + * cdns3_device_thread_irq_handler- interrupt handler for device part
    > + * of controller
    > + *
    > + * @irq: irq number for cdns3 core device
    > + * @data: structure of cdns3
    > + *
    > + * Returns IRQ_HANDLED or IRQ_NONE
    > + */
    > +static irqreturn_t cdns3_device_thread_irq_handler(int irq, void *data)
    > +{
    > + struct cdns3_device *priv_dev;
    > + struct cdns3 *cdns = data;
    > + irqreturn_t ret = IRQ_NONE;
    > + unsigned long flags;
    > + u32 ep_ien;
    > + int bit;
    > + u32 reg;
    > +
    > + priv_dev = cdns->gadget_dev;
    > + spin_lock_irqsave(&priv_dev->lock, flags);
    > +
    > + reg = readl(&priv_dev->regs->ep_ists);
    > + ep_ien = reg;
    > +
    > + /* handle default endpoint OUT */
    > + if (reg & EP_ISTS_EP_OUT0) {
    > + cdns3_check_ep0_interrupt_proceed(priv_dev, USB_DIR_OUT);
    > + ret = IRQ_HANDLED;
    > + }
    > +
    > + /* handle default endpoint IN */
    > + if (reg & EP_ISTS_EP_IN0) {
    > + cdns3_check_ep0_interrupt_proceed(priv_dev, USB_DIR_IN);
    > + ret = IRQ_HANDLED;
    > + }
    > +
    > + /* check if interrupt from non default endpoint, if no exit */
    > + reg &= ~(EP_ISTS_EP_OUT0 | EP_ISTS_EP_IN0);
    > + if (!reg)
    > + goto irqend;
    > +
    > + for_each_set_bit(bit, (unsigned long *)&reg,
    > + sizeof(u32) * BITS_PER_BYTE) {
    > + cdns3_check_ep_interrupt_proceed(priv_dev->eps[bit]);
    > + ret = IRQ_HANDLED;
    > + }
    > +
    > +irqend:
    > + ep_ien |= readl(&priv_dev->regs->ep_ien);
    > + /* Unmask all handled EP interrupts */
    > + writel(ep_ien, &priv_dev->regs->ep_ien);
    > + spin_unlock_irqrestore(&priv_dev->lock, flags);
    > + return ret;
    > +}
    > +
    > +/**
    > + * cdns3_ep_onchip_buffer_reserve - Try to reserve onchip buf for EP
    > + *
    > + * The real reservation will occur during write to EP_CFG register,
    > + * this function is used to check if the 'size' reservation is allowed.
    > + *
    > + * @priv_dev: extended gadget object
    > + * @size: the size (KB) for EP would like to allocate
    > + *
    > + * Return 0 if the required size can met or negative value on failure
    > + */
    > +static int cdns3_ep_onchip_buffer_reserve(struct cdns3_device *priv_dev,
    > + int size)
    > +{
    > + u32 onchip_mem;
    > +
    > + priv_dev->onchip_mem_allocated_size += size;
    > +
    > + onchip_mem = USB_CAP2_ACTUAL_MEM_SIZE(readl(&priv_dev->regs->usb_cap2));
    > + if (!onchip_mem)
    > + onchip_mem = 256;
    > +
    > + /* 2KB is reserved for EP0*/
    > + onchip_mem -= 2;
    > + if (priv_dev->onchip_mem_allocated_size > onchip_mem) {
    > + priv_dev->onchip_mem_allocated_size -= size;
    > + return -EPERM;
    > + }
    > +
    > + return 0;
    > +}
    > +
    > +/**
    > + * cdns3_ep_config Configure hardware endpoint
    > + * @priv_ep: extended endpoint object
    > + */
    > +void cdns3_ep_config(struct cdns3_endpoint *priv_ep)
    > +{
    > + bool is_iso_ep = (priv_ep->type == USB_ENDPOINT_XFER_ISOC);
    > + struct cdns3_device *priv_dev = priv_ep->cdns3_dev;
    > + u32 bEndpointAddress = priv_ep->num | priv_ep->dir;
    > + u32 max_packet_size = 0;
    > + u32 ep_cfg = 0;
    > + int ret;
    > +
    > + switch (priv_ep->type) {
    > + case USB_ENDPOINT_XFER_INT:
    > + ep_cfg = EP_CFG_EPTYPE(USB_ENDPOINT_XFER_INT);
    > + break;
    > + case USB_ENDPOINT_XFER_BULK:
    > + ep_cfg = EP_CFG_EPTYPE(USB_ENDPOINT_XFER_BULK);
    > + break;
    > + default:
    > + ep_cfg = EP_CFG_EPTYPE(USB_ENDPOINT_XFER_ISOC);
    > + }
    > +
    > + switch (priv_dev->gadget.speed) {
    > + case USB_SPEED_FULL:
    > + max_packet_size = is_iso_ep ? 1023 : 64;
    > + break;
    > + case USB_SPEED_HIGH:
    > + max_packet_size = is_iso_ep ? 1024 : 512;
    > + break;
    > + case USB_SPEED_SUPER:
    > + max_packet_size = 1024;
    > + break;
    > + default:
    > + /* all other speed are not supported */
    > + return;
    > + }
    > +
    > + ret = cdns3_ep_onchip_buffer_reserve(priv_dev, CDNS3_EP_BUF_SIZE);
    > + if (ret) {
    > + dev_err(priv_dev->dev, "onchip mem is full, ep is invalid\n");
    > + return;
    > + }
    > +
    > + ep_cfg |= EP_CFG_MAXPKTSIZE(max_packet_size) |
    > + EP_CFG_BUFFERING(CDNS3_EP_BUF_SIZE - 1) |
    > + EP_CFG_MAXBURST(priv_ep->endpoint.maxburst);
    > +
    > + cdns3_select_ep(priv_dev, bEndpointAddress);
    > + writel(ep_cfg, &priv_dev->regs->ep_cfg);
    > +
    > + dev_dbg(priv_dev->dev, "Configure %s: with val %08x\n",
    > + priv_ep->name, ep_cfg);
    > +}
    > +
    > +/* Find correct direction for HW endpoint according to description */
    > +static int cdns3_ep_dir_is_correct(struct usb_endpoint_descriptor *desc,
    > + struct cdns3_endpoint *priv_ep)
    > +{
    > + return (priv_ep->endpoint.caps.dir_in && usb_endpoint_dir_in(desc)) ||
    > + (priv_ep->endpoint.caps.dir_out && usb_endpoint_dir_out(desc));
    > +}
    > +
    > +static struct
    > +cdns3_endpoint *cdns3_find_available_ep(struct cdns3_device *priv_dev,
    > + struct usb_endpoint_descriptor *desc)
    > +{
    > + struct usb_ep *ep;
    > + struct cdns3_endpoint *priv_ep;
    > +
    > + list_for_each_entry(ep, &priv_dev->gadget.ep_list, ep_list) {
    > + unsigned long num;
    > + int ret;
    > + /* ep name pattern likes epXin or epXout */
    > + char c[2] = {ep->name[2], '\0'};
    > +
    > + ret = kstrtoul(c, 10, &num);
    > + if (ret)
    > + return ERR_PTR(ret);
    > +
    > + priv_ep = ep_to_cdns3_ep(ep);
    > + if (cdns3_ep_dir_is_correct(desc, priv_ep)) {
    > + if (!(priv_ep->flags & EP_CLAIMED)) {
    > + priv_ep->num = num;
    > + return priv_ep;
    > + }
    > + }
    > + }
    > +
    > + return ERR_PTR(-ENOENT);
    > +}
    > +
    > +/*
    > + * Cadence IP has one limitation that all endpoints must be configured
    > + * (Type & MaxPacketSize) before setting configuration through hardware
    > + * register, it means we can't change endpoints configuration after
    > + * set_configuration.
    > + *
    > + * This function set EP_CLAIMED flag which is added when the gadget driver
    > + * uses usb_ep_autoconfig to configure specific endpoint;
    > + * When the udc driver receives set_configurion request,
    > + * it goes through all claimed endpoints, and configure all endpoints
    > + * accordingly.
    > + *
    > + * At usb_ep_ops.enable/disable, we only enable and disable endpoint through
    > + * ep_cfg register which can be changed after set_configuration, and do
    > + * some software operation accordingly.
    > + */
    > +static struct
    > +usb_ep *cdns3_gadget_match_ep(struct usb_gadget *gadget,
    > + struct usb_endpoint_descriptor *desc,
    > + struct usb_ss_ep_comp_descriptor *comp_desc)
    > +{
    > + struct cdns3_device *priv_dev = gadget_to_cdns3_device(gadget);
    > + struct cdns3_endpoint *priv_ep;
    > + unsigned long flags;
    > +
    > + priv_ep = cdns3_find_available_ep(priv_dev, desc);
    > + if (IS_ERR(priv_ep)) {
    > + dev_err(priv_dev->dev, "no available ep\n");
    > + return NULL;
    > + }
    > +
    > + dev_dbg(priv_dev->dev, "match endpoint: %s\n", priv_ep->name);
    > +
    > + spin_lock_irqsave(&priv_dev->lock, flags);
    > + priv_ep->endpoint.desc = desc;
    > + priv_ep->dir = usb_endpoint_dir_in(desc) ? USB_DIR_IN : USB_DIR_OUT;
    > + priv_ep->type = usb_endpoint_type(desc);
    > + priv_ep->flags |= EP_CLAIMED;
    > + spin_unlock_irqrestore(&priv_dev->lock, flags);
    > + return &priv_ep->endpoint;
    > +}
    > +
    > +/**
    > + * cdns3_gadget_ep_alloc_request Allocates request
    > + * @ep: endpoint object associated with request
    > + * @gfp_flags: gfp flags
    > + *
    > + * Returns allocated request address, NULL on allocation error
    > + */
    > +struct usb_request *cdns3_gadget_ep_alloc_request(struct usb_ep *ep,
    > + gfp_t gfp_flags)
    > +{
    > + struct cdns3_endpoint *priv_ep = ep_to_cdns3_ep(ep);
    > + struct cdns3_request *priv_req;
    > +
    > + priv_req = kzalloc(sizeof(*priv_req), gfp_flags);
    > + if (!priv_req)
    > + return NULL;
    > +
    > + priv_req->priv_ep = priv_ep;
    > +
    > + trace_cdns3_alloc_request(priv_req);
    > + return &priv_req->request;
    > +}
    > +
    > +/**
    > + * cdns3_gadget_ep_free_request Free memory occupied by request
    > + * @ep: endpoint object associated with request
    > + * @request: request to free memory
    > + */
    > +void cdns3_gadget_ep_free_request(struct usb_ep *ep,
    > + struct usb_request *request)
    > +{
    > + struct cdns3_request *priv_req = to_cdns3_request(request);
    > +
    > + trace_cdns3_free_request(priv_req);
    > + kfree(priv_req);
    > +}
    > +
    > +/**
    > + * cdns3_gadget_ep_enable Enable endpoint
    > + * @ep: endpoint object
    > + * @desc: endpoint descriptor
    > + *
    > + * Returns 0 on success, error code elsewhere
    > + */
    > +static int cdns3_gadget_ep_enable(struct usb_ep *ep,
    > + const struct usb_endpoint_descriptor *desc)
    > +{
    > + struct cdns3_endpoint *priv_ep;
    > + struct cdns3_device *priv_dev;
    > + u32 reg = EP_STS_EN_TRBERREN;
    > + u32 bEndpointAddress;
    > + unsigned long flags;
    > + int ret;
    > +
    > + priv_ep = ep_to_cdns3_ep(ep);
    > + priv_dev = priv_ep->cdns3_dev;
    > +
    > + if (!ep || !desc || desc->bDescriptorType != USB_DT_ENDPOINT) {
    > + dev_dbg(priv_dev->dev, "usbss: invalid parameters\n");
    > + return -EINVAL;
    > + }
    > +
    > + if (!desc->wMaxPacketSize) {
    > + dev_err(priv_dev->dev, "usbss: missing wMaxPacketSize\n");
    > + return -EINVAL;
    > + }
    > +
    > + if (dev_WARN_ONCE(priv_dev->dev, priv_ep->flags & EP_ENABLED,
    > + "%s is already enabled\n", priv_ep->name))
    > + return 0;
    > +
    > + spin_lock_irqsave(&priv_dev->lock, flags);
    > +
    > + priv_ep->endpoint.desc = desc;
    > + priv_ep->type = usb_endpoint_type(desc);
    > + priv_ep->interval = desc->bInterval ? BIT(desc->bInterval - 1) : 0;
    > +
    > + if (priv_ep->interval > ISO_MAX_INTERVAL &&
    > + priv_ep->type == USB_ENDPOINT_XFER_ISOC) {
    > + dev_err(priv_dev->dev, "Driver is limited to %d period\n",
    > + ISO_MAX_INTERVAL);
    > +
    > + ret = -EINVAL;
    > + goto exit;
    > + }
    > +
    > + ret = cdns3_allocate_trb_pool(priv_ep);
    > +
    > + if (ret)
    > + goto exit;
    > +
    > + bEndpointAddress = priv_ep->num | priv_ep->dir;
    > + cdns3_select_ep(priv_dev, bEndpointAddress);
    > +
    > + trace_cdns3_gadget_ep_enable(priv_ep);
    > +
    > + writel(EP_CMD_EPRST, &priv_dev->regs->ep_cmd);
    > +
    > + ret = cdns3_handshake(&priv_dev->regs->ep_cmd,
    > + EP_CMD_CSTALL | EP_CMD_EPRST, 0, 100);
    > +
    > + /* enable interrupt for selected endpoint */
    > + cdns3_set_register_bit(&priv_dev->regs->ep_ien,
    > + BIT(cdns3_ep_addr_to_index(bEndpointAddress)));
    > + /*
    > + * WA1: Set flag for all not ISOC OUT endpoints. If this flag is set
    > + * driver try to detect whether endpoint need additional internal
    > + * buffer for unblocking on-chip FIFO buffer. This flag will be cleared
    > + * if before first DESCMISS interrupt the DMA will be armed.
    > + */
    > + if (!priv_ep->dir && priv_ep->type != USB_ENDPOINT_XFER_ISOC) {
    > + priv_ep->flags |= EP_QUIRK_EXTRA_BUF_DET;
    > + reg |= EP_STS_EN_DESCMISEN;
    > + }
    > +
    > + writel(reg, &priv_dev->regs->ep_sts_en);
    > +
    > + cdns3_set_register_bit(&priv_dev->regs->ep_cfg, EP_CFG_ENABLE);
    > +
    > + ep->desc = desc;
    > + priv_ep->flags &= ~(EP_PENDING_REQUEST | EP_STALL |
    > + EP_QUIRK_EXTRA_BUF_EN);
    > + priv_ep->flags |= EP_ENABLED | EP_UPDATE_EP_TRBADDR;
    > + priv_ep->enqueue = 0;
    > + priv_ep->dequeue = 0;
    > + reg = readl(&priv_dev->regs->ep_sts);
    > + priv_ep->pcs = !!EP_STS_CCS(reg);
    > + priv_ep->ccs = !!EP_STS_CCS(reg);
    > + /* one TRB is reserved for link TRB used in DMULT mode*/
    > + priv_ep->free_trbs = priv_ep->num_trbs - 1;
    > +exit:
    > + spin_unlock_irqrestore(&priv_dev->lock, flags);
    > +
    > + return ret;
    > +}
    > +
    > +/**
    > + * cdns3_gadget_ep_disable Disable endpoint
    > + * @ep: endpoint object
    > + *
    > + * Returns 0 on success, error code elsewhere
    > + */
    > +static int cdns3_gadget_ep_disable(struct usb_ep *ep)
    > +{
    > + struct cdns3_endpoint *priv_ep;
    > + struct cdns3_request *priv_req;
    > + struct cdns3_device *priv_dev;
    > + struct usb_request *request;
    > + unsigned long flags;
    > + int ret = 0;
    > + u32 ep_cfg;
    > +
    > + if (!ep) {
    > + pr_err("usbss: invalid parameters\n");
    > + return -EINVAL;
    > + }
    > +
    > + priv_ep = ep_to_cdns3_ep(ep);
    > + priv_dev = priv_ep->cdns3_dev;
    > +
    > + if (dev_WARN_ONCE(priv_dev->dev, !(priv_ep->flags & EP_ENABLED),
    > + "%s is already disabled\n", priv_ep->name))
    > + return 0;
    > +
    > + spin_lock_irqsave(&priv_dev->lock, flags);
    > +
    > + trace_cdns3_gadget_ep_disable(priv_ep);
    > +
    > + cdns3_select_ep(priv_dev, ep->desc->bEndpointAddress);
    > + ret = cdns3_data_flush(priv_ep);
    > +
    > + ep_cfg = readl(&priv_dev->regs->ep_cfg);
    > + ep_cfg &= ~EP_CFG_ENABLE;
    > + writel(ep_cfg, &priv_dev->regs->ep_cfg);
    > +
    > + while (!list_empty(&priv_ep->pending_req_list)) {
    > + request = cdns3_next_request(&priv_ep->pending_req_list);
    > +
    > + cdns3_gadget_giveback(priv_ep, to_cdns3_request(request),
    > + -ESHUTDOWN);
    > + }
    > +
    > + while (!list_empty(&priv_ep->descmiss_req_list)) {
    > + priv_req = cdns3_next_priv_request(&priv_ep->descmiss_req_list);
    > +
    > + kfree(priv_req->request.buf);
    > + cdns3_gadget_ep_free_request(&priv_ep->endpoint,
    > + &priv_req->request);
    > + }
    > +
    > + while (!list_empty(&priv_ep->deferred_req_list)) {
    > + request = cdns3_next_request(&priv_ep->deferred_req_list);
    > +
    > + cdns3_gadget_giveback(priv_ep, to_cdns3_request(request),
    > + -ESHUTDOWN);
    > + }
    > +
    > + priv_ep->descmis_req = NULL;
    > +
    > + ep->desc = NULL;
    > + priv_ep->flags &= ~EP_ENABLED;
    > +
    > + spin_unlock_irqrestore(&priv_dev->lock, flags);
    > +
    > + return ret;
    > +}
    > +
    > +/**
    > + * cdns3_gadget_ep_queue Transfer data on endpoint
    > + * @ep: endpoint object
    > + * @request: request object
    > + * @gfp_flags: gfp flags
    > + *
    > + * Returns 0 on success, error code elsewhere
    > + */
    > +static int __cdns3_gadget_ep_queue(struct usb_ep *ep,
    > + struct usb_request *request,
    > + gfp_t gfp_flags)
    > +{
    > + struct cdns3_endpoint *priv_ep = ep_to_cdns3_ep(ep);
    > + struct cdns3_device *priv_dev = priv_ep->cdns3_dev;
    > + struct cdns3_request *priv_req;
    > + int deferred = 0;
    > + int ret = 0;
    > +
    > + request->actual = 0;
    > + request->status = -EINPROGRESS;
    > + priv_req = to_cdns3_request(request);
    > + trace_cdns3_ep_queue(priv_req);
    > +
    > + /*
    > + * WA1: if transfer was queued before DESCMISS appear than we
    > + * can disable handling of DESCMISS interrupt. Driver assumes that it
    > + * can disable special treatment for this endpoint.
    > + */
    > + if (priv_ep->flags & EP_QUIRK_EXTRA_BUF_DET) {
    > + u32 reg;
    > +
    > + cdns3_select_ep(priv_dev, priv_ep->num | priv_ep->dir);
    > + reg = readl(&priv_dev->regs->ep_sts_en);
    > + priv_ep->flags &= ~EP_QUIRK_EXTRA_BUF_DET;
    > + reg &= EP_STS_EN_DESCMISEN;
    > + writel(reg, &priv_dev->regs->ep_sts_en);
    > + }
    > +
    > + /* WA1 */
    > + if (priv_ep->flags & EP_QUIRK_EXTRA_BUF_EN) {
    > + u8 pending_empty = list_empty(&priv_ep->pending_req_list);
    > + u8 descmiss_empty = list_empty(&priv_ep->descmiss_req_list);
    > +
    > + /*
    > + * DESCMISS transfer has been finished, so data will be
    > + * directly copied from internal allocated usb_request
    > + * objects.
    > + */
    > + if (pending_empty && !descmiss_empty &&
    > + !(priv_req->flags & REQUEST_INTERNAL)) {
    > + cdns3_descmiss_copy_data(priv_ep, request);
    > + list_add_tail(&request->list,
    > + &priv_ep->pending_req_list);
    > + cdns3_gadget_giveback(priv_ep, priv_req,
    > + request->status);
    > + return ret;
    > + }
    > +
    > + /*
    > + * WA1 driver will wait for completion DESCMISS transfer,
    > + * before starts new, not DESCMISS transfer.
    > + */
    > + if (!pending_empty && !descmiss_empty)
    > + deferred = 1;
    > +
    > + if (priv_req->flags & REQUEST_INTERNAL)
    > + list_add_tail(&priv_req->list,
    > + &priv_ep->descmiss_req_list);
    > + }
    > +
    > + ret = usb_gadget_map_request_by_dev(priv_dev->sysdev, request,
    > + usb_endpoint_dir_in(ep->desc));
    > + if (ret)
    > + return ret;
    > +
    > + /*
    > + * If hardware endpoint configuration has not been set yet then
    > + * just queue request in deferred list. Transfer will be started in
    > + * cdns3_set_hw_configuration.
    > + */
    > + if (!priv_dev->hw_configured_flag)
    > + deferred = 1;
    > + else
    > + ret = cdns3_ep_run_transfer(priv_ep, request);
    > +
    > + if (ret || deferred)
    > + list_add_tail(&request->list, &priv_ep->deferred_req_list);
    > + else
    > + list_add_tail(&request->list, &priv_ep->pending_req_list);
    > +
    > + return ret;
    > +}
    > +
    > +static int cdns3_gadget_ep_queue(struct usb_ep *ep, struct usb_request *request,
    > + gfp_t gfp_flags)
    > +{
    > + struct usb_request *zlp_request;
    > + struct cdns3_endpoint *priv_ep;
    > + struct cdns3_device *priv_dev;
    > + unsigned long flags;
    > + int ret;
    > +
    > + if (!request || !ep)
    > + return -EINVAL;
    > +
    > + priv_ep = ep_to_cdns3_ep(ep);
    > + priv_dev = priv_ep->cdns3_dev;
    > +
    > + spin_lock_irqsave(&priv_dev->lock, flags);
    > +
    > + ret = __cdns3_gadget_ep_queue(ep, request, gfp_flags);
    > +
    > + if (ret == 0 && request->zero && request->length &&
    > + (request->length % ep->maxpacket == 0)) {
    > + struct cdns3_request *priv_req;
    > +
    > + zlp_request = cdns3_gadget_ep_alloc_request(ep, GFP_ATOMIC);
    > + zlp_request->buf = priv_dev->zlp_buf;
    > + zlp_request->length = 0;
    > +
    > + priv_req = to_cdns3_request(zlp_request);
    > + priv_req->flags |= REQUEST_ZLP;
    > +
    > + dev_dbg(priv_dev->dev, "Queuing ZLP for endpoint: %s\n",
    > + priv_ep->name);
    > + ret = __cdns3_gadget_ep_queue(ep, zlp_request, gfp_flags);
    > + }
    > +
    > + spin_unlock_irqrestore(&priv_dev->lock, flags);
    > + return ret;
    > +}
    > +
    > +/**
    > + * cdns3_gadget_ep_dequeue Remove request from transfer queue
    > + * @ep: endpoint object associated with request
    > + * @request: request object
    > + *
    > + * Returns 0 on success, error code elsewhere
    > + */
    > +int cdns3_gadget_ep_dequeue(struct usb_ep *ep,
    > + struct usb_request *request)
    > +{
    > + struct cdns3_endpoint *priv_ep = ep_to_cdns3_ep(ep);
    > + struct cdns3_device *priv_dev = priv_ep->cdns3_dev;
    > + struct usb_request *req, *req_temp;
    > + struct cdns3_request *priv_req;
    > + unsigned long flags;
    > + int ret = 0;
    > +
    > + if (!ep || !request || !ep->desc)
    > + return -EINVAL;
    > +
    > + spin_lock_irqsave(&priv_dev->lock, flags);
    > +
    > + priv_req = to_cdns3_request(request);
    > +
    > + trace_cdns3_ep_dequeue(priv_req);
    > +
    > + cdns3_select_ep(priv_dev, ep->desc->bEndpointAddress);
    > +
    > + list_for_each_entry_safe(req, req_temp, &priv_ep->pending_req_list,
    > + list) {
    > + if (request == req)
    > + goto found;
    > + }
    > +
    > + list_for_each_entry_safe(req, req_temp, &priv_ep->deferred_req_list,
    > + list) {
    > + if (request == req)
    > + goto found;
    > + }
    > +
    > +found:
    > + if (request == req)
    > + cdns3_gadget_giveback(priv_ep, priv_req, -ECONNRESET);
    > +
    > + spin_unlock_irqrestore(&priv_dev->lock, flags);
    > + return ret;
    > +}
    > +
    > +/**
    > + * cdns3_gadget_ep_set_halt Sets/clears stall on selected endpoint
    > + * @ep: endpoint object to set/clear stall on
    > + * @value: 1 for set stall, 0 for clear stall
    > + *
    > + * Returns 0 on success, error code elsewhere
    > + */
    > +int cdns3_gadget_ep_set_halt(struct usb_ep *ep, int value)
    > +{
    > + struct cdns3_endpoint *priv_ep = ep_to_cdns3_ep(ep);
    > + struct cdns3_device *priv_dev = priv_ep->cdns3_dev;
    > + unsigned long flags;
    > + int ret = 0;
    > +
    > + if (!(priv_ep->flags & EP_ENABLED))
    > + return -EPERM;
    > +
    > + spin_lock_irqsave(&priv_dev->lock, flags);
    > +
    > + /* if actual transfer is pending defer setting stall on this endpoint */
    > + if ((priv_ep->flags & EP_PENDING_REQUEST) && value) {
    > + priv_ep->flags |= EP_STALL;
    > + goto finish;
    > + }
    > +
    > + dev_dbg(priv_dev->dev, "Halt endpoint %s\n", priv_ep->name);
    > +
    > + cdns3_select_ep(priv_dev, ep->desc->bEndpointAddress);
    > + if (value) {
    > + cdns3_ep_stall_flush(priv_ep);
    > + } else {
    > + priv_ep->flags &= ~EP_WEDGE;
    > + writel(EP_CMD_CSTALL | EP_CMD_EPRST, &priv_dev->regs->ep_cmd);
    > +
    > + /* wait for EPRST cleared */
    > + ret = cdns3_handshake(&priv_dev->regs->ep_cmd,
    > + EP_CMD_EPRST, 0, 100);
    > + if (unlikely(ret)) {
    > + dev_err(priv_dev->dev,
    > + "Clearing halt condition failed for %s\n",
    > + priv_ep->name);
    > + goto finish;
    > +
    > + } else {
    > + priv_ep->flags &= ~EP_STALL;
    > + }
    > + }
    > +
    > + priv_ep->flags &= ~EP_PENDING_REQUEST;
    > +finish:
    > + spin_unlock_irqrestore(&priv_dev->lock, flags);
    > +
    > + return ret;
    > +}
    > +
    > +extern const struct usb_ep_ops cdns3_gadget_ep0_ops;
    > +
    > +static const struct usb_ep_ops cdns3_gadget_ep_ops = {
    > + .enable = cdns3_gadget_ep_enable,
    > + .disable = cdns3_gadget_ep_disable,
    > + .alloc_request = cdns3_gadget_ep_alloc_request,
    > + .free_request = cdns3_gadget_ep_free_request,
    > + .queue = cdns3_gadget_ep_queue,
    > + .dequeue = cdns3_gadget_ep_dequeue,
    > + .set_halt = cdns3_gadget_ep_set_halt,
    > + .set_wedge = cdns3_gadget_ep_set_wedge,
    > +};
    > +
    > +/**
    > + * cdns3_gadget_get_frame Returns number of actual ITP frame
    > + * @gadget: gadget object
    > + *
    > + * Returns number of actual ITP frame
    > + */
    > +static int cdns3_gadget_get_frame(struct usb_gadget *gadget)
    > +{
    > + struct cdns3_device *priv_dev = gadget_to_cdns3_device(gadget);
    > +
    > + return readl(&priv_dev->regs->usb_iptn);
    > +}
    > +
    > +static int cdns3_gadget_wakeup(struct usb_gadget *gadget)
    > +{
    > + return 0;
    > +}
    > +
    > +static int cdns3_gadget_set_selfpowered(struct usb_gadget *gadget,
    > + int is_selfpowered)
    > +{
    > + struct cdns3_device *priv_dev = gadget_to_cdns3_device(gadget);
    > + unsigned long flags;
    > +
    > + spin_lock_irqsave(&priv_dev->lock, flags);
    > + priv_dev->is_selfpowered = !!is_selfpowered;
    > + spin_unlock_irqrestore(&priv_dev->lock, flags);
    > + return 0;
    > +}
    > +
    > +static int cdns3_gadget_pullup(struct usb_gadget *gadget, int is_on)
    > +{
    > + struct cdns3_device *priv_dev = gadget_to_cdns3_device(gadget);
    > +
    > + if (is_on)
    > + writel(USB_CONF_DEVEN, &priv_dev->regs->usb_conf);
    > + else
    > + writel(USB_CONF_DEVDS, &priv_dev->regs->usb_conf);
    > +
    > + return 0;
    > +}
    > +
    > +static void cdns3_gadget_config(struct cdns3_device *priv_dev)
    > +{
    > + struct cdns3_usb_regs __iomem *regs = priv_dev->regs;
    > +
    > + cdns3_ep0_config(priv_dev);
    > +
    > + /* enable interrupts for endpoint 0 (in and out) */
    > + writel(EP_IEN_EP_OUT0 | EP_IEN_EP_IN0, &regs->ep_ien);
    > +
    > + /* enable generic interrupt*/
    > + writel(USB_IEN_INIT, &regs->usb_ien);
    > + writel(USB_CONF_CLK2OFFDS | USB_CONF_L1DS, &regs->usb_conf);
    > + writel(USB_CONF_DMULT, &regs->usb_conf);
    > + cdns3_gadget_pullup(&priv_dev->gadget, 1);
    > +}
    > +
    > +/**
    > + * cdns3_gadget_udc_start Gadget start
    > + * @gadget: gadget object
    > + * @driver: driver which operates on this gadget
    > + *
    > + * Returns 0 on success, error code elsewhere
    > + */
    > +static int cdns3_gadget_udc_start(struct usb_gadget *gadget,
    > + struct usb_gadget_driver *driver)
    > +{
    > + struct cdns3_device *priv_dev = gadget_to_cdns3_device(gadget);
    > + unsigned long flags;
    > +
    > + spin_lock_irqsave(&priv_dev->lock, flags);
    > + priv_dev->gadget_driver = driver;
    > + cdns3_gadget_config(priv_dev);
    > + spin_unlock_irqrestore(&priv_dev->lock, flags);
    > + return 0;
    > +}
    > +
    > +/**
    > + * cdns3_gadget_udc_stop Stops gadget
    > + * @gadget: gadget object
    > + *
    > + * Returns 0
    > + */
    > +static int cdns3_gadget_udc_stop(struct usb_gadget *gadget)
    > +{
    > + struct cdns3_device *priv_dev = gadget_to_cdns3_device(gadget);
    > + struct cdns3_endpoint *priv_ep;
    > + u32 bEndpointAddress;
    > + struct usb_ep *ep;
    > + int ret = 0;
    > +
    > + priv_dev->gadget_driver = NULL;
    > +
    > + priv_dev->onchip_mem_allocated_size = 0;
    > + priv_dev->gadget.speed = USB_SPEED_UNKNOWN;
    > +
    > + list_for_each_entry(ep, &priv_dev->gadget.ep_list, ep_list) {
    > + priv_ep = ep_to_cdns3_ep(ep);
    > + bEndpointAddress = priv_ep->num | priv_ep->dir;
    > + cdns3_select_ep(priv_dev, bEndpointAddress);
    > + writel(EP_CMD_EPRST, &priv_dev->regs->ep_cmd);
    > + ret = cdns3_handshake(&priv_dev->regs->ep_cmd,
    > + EP_CMD_EPRST, 0, 100);
    > + cdns3_free_trb_pool(priv_ep);
    > + }
    > +
    > + /* disable interrupt for device */
    > + writel(0, &priv_dev->regs->usb_ien);
    > + writel(USB_CONF_DEVDS, &priv_dev->regs->usb_conf);
    > +
    > + return ret;
    > +}
    > +
    > +static const struct usb_gadget_ops cdns3_gadget_ops = {
    > + .get_frame = cdns3_gadget_get_frame,
    > + .wakeup = cdns3_gadget_wakeup,
    > + .set_selfpowered = cdns3_gadget_set_selfpowered,
    > + .pullup = cdns3_gadget_pullup,
    > + .udc_start = cdns3_gadget_udc_start,
    > + .udc_stop = cdns3_gadget_udc_stop,
    > + .match_ep = cdns3_gadget_match_ep,
    > +};
    > +
    > +static void cdns3_free_all_eps(struct cdns3_device *priv_dev)
    > +{
    > + int i;
    > +
    > + /*ep0 OUT point to ep0 IN*/
    > + priv_dev->eps[16] = NULL;
    > +
    > + cdns3_free_trb_pool(priv_dev->eps[0]);
    > +
    > + for (i = 0; i < CDNS3_ENDPOINTS_MAX_COUNT; i++)
    > + if (priv_dev->eps[i])
    > + devm_kfree(priv_dev->dev, priv_dev->eps[i]);
    > +}
    > +
    > +/**
    > + * cdns3_init_eps Initializes software endpoints of gadget
    > + * @cdns3: extended gadget object
    > + *
    > + * Returns 0 on success, error code elsewhere
    > + */
    > +static int cdns3_init_eps(struct cdns3_device *priv_dev)
    > +{
    > + u32 ep_enabled_reg, iso_ep_reg;
    > + struct cdns3_endpoint *priv_ep;
    > + int ep_dir, ep_number;
    > + u32 ep_mask;
    > + int ret = 0;
    > + int i;
    > +
    > + /* Read it from USB_CAP3 to USB_CAP5 */
    > + ep_enabled_reg = readl(&priv_dev->regs->usb_cap3);
    > + iso_ep_reg = readl(&priv_dev->regs->usb_cap4);
    > +
    > + dev_dbg(priv_dev->dev, "Initializing non-zero endpoints\n");
    > +
    > + for (i = 0; i < CDNS3_ENDPOINTS_MAX_COUNT; i++) {
    > + ep_dir = i >> 4; /* i div 16 */
    > + ep_number = i & 0xF; /* i % 16 */
    > + ep_mask = BIT(i);
    > +
    > + if (!(ep_enabled_reg & ep_mask))
    > + continue;
    > +
    > + if (ep_dir && !ep_number) {
    > + priv_dev->eps[i] = priv_dev->eps[0];
    > + continue;
    > + }
    > +
    > + priv_ep = devm_kzalloc(priv_dev->dev, sizeof(*priv_ep),
    > + GFP_KERNEL);
    > + if (!priv_ep) {
    > + ret = -ENOMEM;
    > + goto err;
    > + }
    > +
    > + /* set parent of endpoint object */
    > + priv_ep->cdns3_dev = priv_dev;
    > + priv_dev->eps[i] = priv_ep;
    > + priv_ep->num = ep_number;
    > + priv_ep->dir = ep_dir ? USB_DIR_IN : USB_DIR_OUT;
    > +
    > + if (!ep_number) {
    > + ret = cdns3_init_ep0(priv_dev, priv_ep);
    > + if (ret) {
    > + dev_err(priv_dev->dev, "Failed to init ep0\n");
    > + goto err;
    > + }
    > + } else {
    > + snprintf(priv_ep->name, sizeof(priv_ep->name), "ep%d%s",
    > + ep_number, !!ep_dir ? "in" : "out");
    > + priv_ep->endpoint.name = priv_ep->name;
    > +
    > + usb_ep_set_maxpacket_limit(&priv_ep->endpoint,
    > + CDNS3_EP_MAX_PACKET_LIMIT);
    > + priv_ep->endpoint.max_streams = CDNS3_EP_MAX_STREAMS;
    > + priv_ep->endpoint.ops = &cdns3_gadget_ep_ops;
    > + if (ep_dir)
    > + priv_ep->endpoint.caps.dir_in = 1;
    > + else
    > + priv_ep->endpoint.caps.dir_out = 1;
    > +
    > + if (iso_ep_reg & ep_mask)
    > + priv_ep->endpoint.caps.type_iso = 1;
    > +
    > + priv_ep->endpoint.caps.type_bulk = 1;
    > + priv_ep->endpoint.caps.type_int = 1;
    > + priv_ep->endpoint.maxburst = CDNS3_EP_BUF_SIZE - 1;
    > +
    > + list_add_tail(&priv_ep->endpoint.ep_list,
    > + &priv_dev->gadget.ep_list);
    > + }
    > +
    > + priv_ep->flags = 0;
    > +
    > + dev_info(priv_dev->dev, "Initialized %s support: %s %s\n",
    > + priv_ep->name,
    > + priv_ep->endpoint.caps.type_bulk ? "BULK, INT" : "",
    > + priv_ep->endpoint.caps.type_iso ? "ISO" : "");
    > +
    > + INIT_LIST_HEAD(&priv_ep->pending_req_list);
    > + INIT_LIST_HEAD(&priv_ep->deferred_req_list);
    > + INIT_LIST_HEAD(&priv_ep->descmiss_req_list);
    > + }
    > +
    > + return 0;
    > +err:
    > + cdns3_free_all_eps(priv_dev);
    > + return -ENOMEM;
    > +}
    > +
    > +static void cdns3_gadget_disable(struct cdns3 *cdns)
    > +{
    > + struct cdns3_device *priv_dev;
    > +
    > + priv_dev = cdns->gadget_dev;
    > +
    > + if (priv_dev->gadget_driver)
    > + priv_dev->gadget_driver->disconnect(&priv_dev->gadget);
    > +
    > + usb_gadget_disconnect(&priv_dev->gadget);
    > + priv_dev->gadget.speed = USB_SPEED_UNKNOWN;
    > +}
    > +
    > +void cdns3_gadget_exit(struct cdns3 *cdns)
    > +{
    > + struct cdns3_device *priv_dev;
    > +
    > + priv_dev = cdns->gadget_dev;
    > +
    > + cdns3_gadget_disable(cdns);
    > +
    > + devm_free_irq(cdns->dev, cdns->irq, cdns);
    > +
    > + pm_runtime_mark_last_busy(cdns->dev);
    > + pm_runtime_put_autosuspend(cdns->dev);
    > +
    > + usb_del_gadget_udc(&priv_dev->gadget);
    > +
    > + cdns3_free_all_eps(priv_dev);
    > +
    > + dma_free_coherent(priv_dev->sysdev, 8, priv_dev->setup_buf,
    > + priv_dev->setup_dma);
    > +
    > + kfree(priv_dev->zlp_buf);
    > + kfree(priv_dev);
    > + cdns->gadget_dev = NULL;
    > +}
    > +
    > +static int cdns3_gadget_start(struct cdns3 *cdns)
    > +{
    > + struct cdns3_device *priv_dev;
    > + u32 max_speed;
    > + int ret;
    > +
    > + priv_dev = kzalloc(sizeof(*priv_dev), GFP_KERNEL);
    > + if (!priv_dev)
    > + return -ENOMEM;
    > +
    > + cdns->gadget_dev = priv_dev;
    > + priv_dev->sysdev = cdns->dev;
    > + priv_dev->dev = cdns->dev;
    > + priv_dev->regs = cdns->dev_regs;
    > +
    > + max_speed = usb_get_maximum_speed(cdns->dev);
    > +
    > + /* Check the maximum_speed parameter */
    > + switch (max_speed) {
    > + case USB_SPEED_FULL:
    > + case USB_SPEED_HIGH:
    > + case USB_SPEED_SUPER:
    > + break;
    > + default:
    > + dev_err(cdns->dev, "invalid maximum_speed parameter %d\n",
    > + max_speed);
    > + /* fall through */
    > + case USB_SPEED_UNKNOWN:
    > + /* default to superspeed */
    > + max_speed = USB_SPEED_SUPER;
    > + break;
    > + }
    > +
    > + /* fill gadget fields */
    > + priv_dev->gadget.max_speed = max_speed;
    > + priv_dev->gadget.speed = USB_SPEED_UNKNOWN;
    > + priv_dev->gadget.ops = &cdns3_gadget_ops;
    > + priv_dev->gadget.name = "usb-ss-gadget";
    > + priv_dev->gadget.sg_supported = 1;
    > +
    > + spin_lock_init(&priv_dev->lock);
    > + INIT_WORK(&priv_dev->pending_status_wq,
    > + cdns3_pending_setup_status_handler);
    > +
    > + /* initialize endpoint container */
    > + INIT_LIST_HEAD(&priv_dev->gadget.ep_list);
    > +
    > + ret = cdns3_init_eps(priv_dev);
    > + if (ret) {
    > + dev_err(priv_dev->dev, "Failed to create endpoints\n");
    > + goto err1;
    > + }
    > +
    > + /* allocate memory for setup packet buffer */
    > + priv_dev->setup_buf = dma_alloc_coherent(priv_dev->sysdev, 8,
    > + &priv_dev->setup_dma, GFP_DMA);
    > + if (!priv_dev->setup_buf) {
    > + dev_err(priv_dev->dev, "Failed to allocate memory for SETUP buffer\n");
    > + ret = -ENOMEM;
    > + goto err2;
    > + }
    > +
    > + priv_dev->dev_ver = readl(&priv_dev->regs->usb_cap6);
    > + dev_dbg(priv_dev->dev, "Device Controller version: %08x\n",
    > + readl(&priv_dev->regs->usb_cap6));
    > + dev_dbg(priv_dev->dev, "USB Capabilities:: %08x\n",
    > + readl(&priv_dev->regs->usb_cap1));
    > + dev_dbg(priv_dev->dev, "On-Chip memory cnfiguration: %08x\n",
    > + readl(&priv_dev->regs->usb_cap2));
    > +
    > + priv_dev->zlp_buf = kzalloc(CDNS3_EP_ZLP_BUF_SIZE, GFP_KERNEL);
    > + if (!priv_dev->zlp_buf) {
    > + ret = -ENOMEM;
    > + goto err3;
    > + }
    > +
    > + /* add USB gadget device */
    > + ret = usb_add_gadget_udc(priv_dev->dev, &priv_dev->gadget);
    > + if (ret < 0) {
    > + dev_err(priv_dev->dev,
    > + "Failed to register USB device controller\n");
    > + goto err4;
    > + }
    > +
    > + return 0;
    > +err4:
    > + kfree(priv_dev->zlp_buf);
    > +err3:
    > + dma_free_coherent(priv_dev->sysdev, 8, priv_dev->setup_buf,
    > + priv_dev->setup_dma);
    > +err2:
    > + cdns3_free_all_eps(priv_dev);
    > +err1:
    > + cdns->gadget_dev = NULL;
    > + return ret;
    > +}
    > +
    > +static int __cdns3_gadget_init(struct cdns3 *cdns)
    > +{
    > + struct cdns3_device *priv_dev;
    > + unsigned long flags;
    > + int ret = 0;
    > +
    > + ret = cdns3_gadget_start(cdns);
    > + if (ret)
    > + return ret;
    > +
    > + priv_dev = cdns->gadget_dev;
    > + ret = devm_request_threaded_irq(cdns->dev, cdns->irq,
    > + cdns3_device_irq_handler,
    > + cdns3_device_thread_irq_handler,
    > + IRQF_SHARED, dev_name(cdns->dev), cdns);
    > + if (ret)
    > + goto err0;
    > +
    > + pm_runtime_get_sync(cdns->dev);
    > + spin_lock_irqsave(&priv_dev->lock, flags);
    > + spin_unlock_irqrestore(&priv_dev->lock, flags);
    > + return 0;
    > +err0:
    > + cdns3_gadget_exit(cdns);
    > + return ret;
    > +}
    > +
    > +static int cdns3_gadget_suspend(struct cdns3 *cdns, bool do_wakeup)
    > +{
    > + cdns3_gadget_disable(cdns);
    > + return 0;
    > +}
    > +
    > +static int cdns3_gadget_resume(struct cdns3 *cdns, bool hibernated)
    > +{
    > + struct cdns3_device *priv_dev;
    > + unsigned long flags;
    > +
    > + priv_dev = cdns->gadget_dev;
    > + spin_lock_irqsave(&priv_dev->lock, flags);
    > +
    > + if (!priv_dev->gadget_driver) {
    > + spin_unlock_irqrestore(&priv_dev->lock, flags);
    > + return 0;
    > + }
    > +
    > + cdns3_gadget_config(priv_dev);
    > + spin_unlock_irqrestore(&priv_dev->lock, flags);
    > + return 0;
    > +}
    > +
    > +/**
    > + * cdns3_gadget_init - initialize device structure
    > + *
    > + * cdns: cdns3 instance
    > + *
    > + * This function initializes the gadget.
    > + */
    > +int cdns3_gadget_init(struct cdns3 *cdns)
    > +{
    > + struct cdns3_role_driver *rdrv;
    > +
    > + rdrv = devm_kzalloc(cdns->dev, sizeof(*rdrv), GFP_KERNEL);
    > + if (!rdrv)
    > + return -ENOMEM;
    > +
    > + rdrv->start = __cdns3_gadget_init;
    > + rdrv->stop = cdns3_gadget_exit;
    > + rdrv->suspend = cdns3_gadget_suspend;
    > + rdrv->resume = cdns3_gadget_resume;
    > + rdrv->state = CDNS3_ROLE_STATE_INACTIVE;
    > + rdrv->name = "gadget";
    > + cdns->roles[CDNS3_ROLE_GADGET] = rdrv;
    > +
    > + return 0;
    > +}
    > diff --git a/drivers/usb/cdns3/gadget.h b/drivers/usb/cdns3/gadget.h
    > new file mode 100644
    > index 000000000000..41cec7f085ad
    > --- /dev/null
    > +++ b/drivers/usb/cdns3/gadget.h
    > @@ -0,0 +1,1206 @@
    > +/* SPDX-License-Identifier: GPL-2.0 */
    > +/*
    > + * USBSS device controller driver header file
    > + *
    > + * Copyright (C) 2018 Cadence.
    > + * Copyright (C) 2017-2018 NXP
    > + *
    > + * Author: Pawel Laszczak <pawell@cadence.com>
    > + * Pawel Jez <pjez@cadence.com>
    > + * Peter Chen <peter.chen@nxp.com>
    > + */
    > +#ifndef __LINUX_CDNS3_GADGET
    > +#define __LINUX_CDNS3_GADGET
    > +#include <linux/usb/gadget.h>
    > +
    > +/*
    > + * USBSS-DEV register interface.
    > + * This corresponds to the USBSS Device Controller Interface
    > + */
    > +
    > +/**
    > + * struct cdns3_usb_regs - device controller registers.
    > + * @usb_conf: Global Configuration Register.
    > + * @usb_sts: Global Status Register.
    > + * @usb_cmd: Global Command Register.
    > + * @usb_iptn: ITP/SOF number Register.
    > + * @usb_lpm: Global Command Register.
    > + * @usb_ien: USB Interrupt Enable Register.
    > + * @usb_ists: USB Interrupt Status Register.
    > + * @ep_sel: Endpoint Select Register.
    > + * @ep_traddr: Endpoint Transfer Ring Address Register.
    > + * @ep_cfg: Endpoint Configuration Register.
    > + * @ep_cmd: Endpoint Command Register.
    > + * @ep_sts: Endpoint Status Register.
    > + * @ep_sts_sid: Endpoint Status Register.
    > + * @ep_sts_en: Endpoint Status Register Enable.
    > + * @drbl: Doorbell Register.
    > + * @ep_ien: EP Interrupt Enable Register.
    > + * @ep_ists: EP Interrupt Status Register.
    > + * @usb_pwr: Global Power Configuration Register.
    > + * @usb_conf2: Global Configuration Register 2.
    > + * @usb_cap1: Capability Register 1.
    > + * @usb_cap2: Capability Register 2.
    > + * @usb_cap3: Capability Register 3.
    > + * @usb_cap4: Capability Register 4.
    > + * @usb_cap5: Capability Register 5.
    > + * @usb_cap6: Capability Register 6.
    > + * @usb_cpkt1: Custom Packet Register 1.
    > + * @usb_cpkt2: Custom Packet Register 2.
    > + * @usb_cpkt3: Custom Packet Register 3.
    > + * @reserved1: Reserved.
    > + * @cfg_regs: Configuration registers.
    > + * @reserved2: Reserved.
    > + * @dma_axi_ctrl: AXI Control register.
    > + * @dma_axi_id: AXI ID register.
    > + * @dma_axi_cap: AXI Capability register.
    > + * @dma_axi_ctrl0: AXI Control 0 register.
    > + * @dma_axi_ctrl1: AXI Control 1 register.
    > + */
    > +struct cdns3_usb_regs {
    > + __le32 usb_conf;
    > + __le32 usb_sts;
    > + __le32 usb_cmd;
    > + __le32 usb_iptn;
    > + __le32 usb_lpm;
    > + __le32 usb_ien;
    > + __le32 usb_ists;
    > + __le32 ep_sel;
    > + __le32 ep_traddr;
    > + __le32 ep_cfg;
    > + __le32 ep_cmd;
    > + __le32 ep_sts;
    > + __le32 ep_sts_sid;
    > + __le32 ep_sts_en;
    > + __le32 drbl;
    > + __le32 ep_ien;
    > + __le32 ep_ists;
    > + __le32 usb_pwr;
    > + __le32 usb_conf2;
    > + __le32 usb_cap1;
    > + __le32 usb_cap2;
    > + __le32 usb_cap3;
    > + __le32 usb_cap4;
    > + __le32 usb_cap5;
    > + __le32 usb_cap6;
    > + __le32 usb_cpkt1;
    > + __le32 usb_cpkt2;
    > + __le32 usb_cpkt3;
    > + __le32 reserved1[36];
    > + __le32 cfg_reg1;
    > + __le32 dbg_link1;
    > + __le32 dbg_link2;
    > + __le32 cfg_regs[74];
    > + __le32 reserved2[34];
    > + __le32 dma_axi_ctrl;
    > + __le32 dma_axi_id;
    > + __le32 dma_axi_cap;
    > + __le32 dma_axi_ctrl0;
    > + __le32 dma_axi_ctrl1;
    > +};
    > +
    > +/* USB_CONF - bitmasks */
    > +/* Reset USB device configuration. */
    > +#define USB_CONF_CFGRST BIT(0)
    > +/* Set Configuration. */
    > +#define USB_CONF_CFGSET BIT(1)
    > +/* Disconnect USB device in SuperSpeed. */
    > +#define USB_CONF_USB3DIS BIT(3)
    > +/* Disconnect USB device in HS/FS */
    > +#define USB_CONF_USB2DIS BIT(4)
    > +/* Little Endian access - default */
    > +#define USB_CONF_LENDIAN BIT(5)
    > +/*
    > + * Big Endian access. Driver assume that byte order for
    > + * SFRs access always is as Little Endian so this bit
    > + * is not used.
    > + */
    > +#define USB_CONF_BENDIAN BIT(6)
    > +/* Device software reset. */
    > +#define USB_CONF_SWRST BIT(7)
    > +/* Singular DMA transfer mode. */
    > +#define USB_CONF_DSING BIT(8)
    > +/* Multiple DMA transfers mode. */
    > +#define USB_CONF_DMULT BIT(9)
    > +/* DMA clock turn-off enable. */
    > +#define USB_CONF_DMAOFFEN BIT(10)
    > +/* DMA clock turn-off disable. */
    > +#define USB_CONF_DMAOFFDS BIT(11)
    > +/* Clear Force Full Speed. */
    > +#define USB_CONF_CFORCE_FS BIT(12)
    > +/* Set Force Full Speed. */
    > +#define USB_CONF_SFORCE_FS BIT(13)
    > +/* Device enable. */
    > +#define USB_CONF_DEVEN BIT(14)
    > +/* Device disable. */
    > +#define USB_CONF_DEVDS BIT(15)
    > +/* L1 LPM state entry enable (used in HS/FS mode). */
    > +#define USB_CONF_L1EN BIT(16)
    > +/* L1 LPM state entry disable (used in HS/FS mode). */
    > +#define USB_CONF_L1DS BIT(17)
    > +/* USB 2.0 clock gate disable. */
    > +#define USB_CONF_CLK2OFFEN BIT(18)
    > +/* USB 2.0 clock gate enable. */
    > +#define USB_CONF_CLK2OFFDS BIT(19)
    > +/* L0 LPM state entry request (used in HS/FS mode). */
    > +#define USB_CONF_LGO_L0 BIT(20)
    > +/* USB 3.0 clock gate disable. */
    > +#define USB_CONF_CLK3OFFEN BIT(21)
    > +/* USB 3.0 clock gate enable. */
    > +#define USB_CONF_CLK3OFFDS BIT(22)
    > +/* Bit 23 is reserved*/
    > +/* U1 state entry enable (used in SS mode). */
    > +#define USB_CONF_U1EN BIT(24)
    > +/* U1 state entry disable (used in SS mode). */
    > +#define USB_CONF_U1DS BIT(25)
    > +/* U2 state entry enable (used in SS mode). */
    > +#define USB_CONF_U2EN BIT(26)
    > +/* U2 state entry disable (used in SS mode). */
    > +#define USB_CONF_U2DS BIT(27)
    > +/* U0 state entry request (used in SS mode). */
    > +#define USB_CONF_LGO_U0 BIT(28)
    > +/* U1 state entry request (used in SS mode). */
    > +#define USB_CONF_LGO_U1 BIT(29)
    > +/* U2 state entry request (used in SS mode). */
    > +#define USB_CONF_LGO_U2 BIT(30)
    > +/* SS.Inactive state entry request (used in SS mode) */
    > +#define USB_CONF_LGO_SSINACT BIT(31)
    > +
    > +/* USB_STS - bitmasks */
    > +/*
    > + * Configuration status.
    > + * 1 - device is in the configured state.
    > + * 0 - device is not configured.
    > + */
    > +#define USB_STS_CFGSTS_MASK BIT(0)
    > +#define USB_STS_CFGSTS(p) ((p) & USB_STS_CFGSTS_MASK)
    > +/*
    > + * On-chip memory overflow.
    > + * 0 - On-chip memory status OK.
    > + * 1 - On-chip memory overflow.
    > + */
    > +#define USB_STS_OV_MASK BIT(1)
    > +#define USB_STS_OV(p) ((p) & USB_STS_OV_MASK)
    > +/*
    > + * SuperSpeed connection status.
    > + * 0 - USB in SuperSpeed mode disconnected.
    > + * 1 - USB in SuperSpeed mode connected.
    > + */
    > +#define USB_STS_USB3CONS_MASK BIT(2)
    > +#define USB_STS_USB3CONS(p) ((p) & USB_STS_USB3CONS_MASK)
    > +/*
    > + * DMA transfer configuration status.
    > + * 0 - single request.
    > + * 1 - multiple TRB chain
    > + */
    > +#define USB_STS_DTRANS_MASK BIT(3)
    > +#define USB_STS_DTRANS(p) ((p) & USB_STS_DTRANS_MASK)
    > +/*
    > + * Device speed.
    > + * 0 - Undefined (value after reset).
    > + * 1 - Low speed
    > + * 2 - Full speed
    > + * 3 - High speed
    > + * 4 - Super speed
    > + */
    > +#define USB_STS_USBSPEED_MASK GENMASK(6, 4)
    > +#define USB_STS_USBSPEED(p) (((p) & USB_STS_USBSPEED_MASK) >> 4)
    > +#define USB_STS_LS (0x1 << 4)
    > +#define USB_STS_FS (0x2 << 4)
    > +#define USB_STS_HS (0x3 << 4)
    > +#define USB_STS_SS (0x4 << 4)
    > +#define DEV_UNDEFSPEED(p) (((p) & USB_STS_USBSPEED_MASK) == (0x0 << 4))
    > +#define DEV_LOWSPEED(p) (((p) & USB_STS_USBSPEED_MASK) == USB_STS_LS)
    > +#define DEV_FULLSPEED(p) (((p) & USB_STS_USBSPEED_MASK) == USB_STS_FS)
    > +#define DEV_HIGHSPEED(p) (((p) & USB_STS_USBSPEED_MASK) == USB_STS_HS)
    > +#define DEV_SUPERSPEED(p) (((p) & USB_STS_USBSPEED_MASK) == USB_STS_SS)
    > +/*
    > + * Endianness for SFR access.
    > + * 0 - Little Endian order (default after hardware reset).
    > + * 1 - Big Endian order
    > + */
    > +#define USB_STS_ENDIAN_MASK BIT(7)
    > +#define USB_STS_ENDIAN(p) ((p) & USB_STS_ENDIAN_MASK)
    > +/*
    > + * HS/FS clock turn-off status.
    > + * 0 - hsfs clock is always on.
    > + * 1 - hsfs clock turn-off in L2 (HS/FS mode) is enabled
    > + * (default after hardware reset).
    > + */
    > +#define USB_STS_CLK2OFF_MASK BIT(8)
    > +#define USB_STS_CLK2OFF(p) ((p) & USB_STS_CLK2OFF_MASK)
    > +/*
    > + * PCLK clock turn-off status.
    > + * 0 - pclk clock is always on.
    > + * 1 - pclk clock turn-off in U3 (SS mode) is enabled
    > + * (default after hardware reset).
    > + */
    > +#define USB_STS_CLK3OFF_MASK BIT(9)
    > +#define USB_STS_CLK3OFF(p) ((p) & USB_STS_CLK3OFF_MASK)
    > +/*
    > + * Controller in reset state.
    > + * 0 - Internal reset is active.
    > + * 1 - Internal reset is not active and controller is fully operational.
    > + */
    > +#define USB_STS_IN_RST_MASK BIT(10)
    > +#define USB_STS_IN_RST(p) ((p) & USB_STS_IN_RST_MASK)
    > +/*
    > + * Device enable Status.
    > + * 0 - USB device is disabled (VBUS input is disconnected from internal logic).
    > + * 1 - USB device is enabled (VBUS input is connected to the internal logic).
    > + */
    > +#define USB_STS_DEVS_MASK BIT(14)
    > +#define USB_STS_DEVS(p) ((p) & USB_STS_DEVS_MASK)
    > +/*
    > + * DAddress statuss.
    > + * 0 - USB device is default state.
    > + * 1 - USB device is at least in address state.
    > + */
    > +#define USB_STS_ADDRESSED_MASK BIT(15)
    > +#define USB_STS_ADDRESSED(p) ((p) & USB_STS_ADDRESSED_MASK)
    > +/*
    > + * L1 LPM state enable status (used in HS/FS mode).
    > + * 0 - Entering to L1 LPM state disabled.
    > + * 1 - Entering to L1 LPM state enabled.
    > + */
    > +#define USB_STS_L1ENS_MASK BIT(16)
    > +#define USB_STS_L1ENS(p) ((p) & USB_STS_L1ENS_MASK)
    > +/*
    > + * Internal VBUS connection status (used both in HS/FS and SS mode).
    > + * 0 - internal VBUS is not detected.
    > + * 1 - internal VBUS is detected.
    > + */
    > +#define USB_STS_VBUSS_MASK BIT(17)
    > +#define USB_STS_VBUSS(p) ((p) & USB_STS_VBUSS_MASK)
    > +/*
    > + * HS/FS LPM state (used in FS/HS mode).
    > + * 0 - L0 State
    > + * 1 - L1 State
    > + * 2 - L2 State
    > + * 3 - L3 State
    > + */
    > +#define USB_STS_LPMST_MASK GENMASK(19, 18)
    > +#define DEV_L0_STATE(p) (((p) & USB_STS_LPMST_MASK) == (0x0 << 18))
    > +#define DEV_L1_STATE(p) (((p) & USB_STS_LPMST_MASK) == (0x1 << 18))
    > +#define DEV_L2_STATE(p) (((p) & USB_STS_LPMST_MASK) == (0x2 << 18))
    > +#define DEV_L3_STATE(p) (((p) & USB_STS_LPMST_MASK) == (0x3 << 18))
    > +/*
    > + * Disable HS status (used in FS/HS mode).
    > + * 0 - the disconnect bit for HS/FS mode is set .
    > + * 1 - the disconnect bit for HS/FS mode is not set.
    > + */
    > +#define USB_STS_USB2CONS_MASK BIT(20)
    > +#define USB_STS_USB2CONS(p) ((p) & USB_STS_USB2CONS_MASK)
    > +/*
    > + * HS/FS mode connection status (used in FS/HS mode).
    > + * 0 - High Speed operations in USB2.0 (FS/HS) mode not disabled.
    > + * 1 - High Speed operations in USB2.0 (FS/HS).
    > + */
    > +#define USB_STS_DISABLE_HS_MASK BIT(21)
    > +#define USB_STS_DISABLE_HS(p) ((p) & USB_STS_DISABLE_HS_MASK)
    > +/*
    > + * U1 state enable status (used in SS mode).
    > + * 0 - Entering to U1 state disabled.
    > + * 1 - Entering to U1 state enabled.
    > + */
    > +#define USB_STS_U1ENS_MASK BIT(24)
    > +#define USB_STS_U1ENS(p) ((p) & USB_STS_U1ENS_MASK)
    > +/*
    > + * U2 state enable status (used in SS mode).
    > + * 0 - Entering to U2 state disabled.
    > + * 1 - Entering to U2 state enabled.
    > + */
    > +#define USB_STS_U2ENS_MASK BIT(25)
    > +#define USB_STS_U2ENS(p) ((p) & USB_STS_U2ENS_MASK)
    > +/*
    > + * SuperSpeed Link LTSSM state. This field reflects USBSS-DEV current
    > + * SuperSpeed link state
    > + */
    > +#define USB_STS_LST_MASK GENMASK(29, 26)
    > +#define DEV_LST_U0 (((p) & USB_STS_LST_MASK) == (0x0 << 26))
    > +#define DEV_LST_U1 (((p) & USB_STS_LST_MASK) == (0x1 << 26))
    > +#define DEV_LST_U2 (((p) & USB_STS_LST_MASK) == (0x2 << 26))
    > +#define DEV_LST_U3 (((p) & USB_STS_LST_MASK) == (0x3 << 26))
    > +#define DEV_LST_DISABLED (((p) & USB_STS_LST_MASK) == (0x4 << 26))
    > +#define DEV_LST_RXDETECT (((p) & USB_STS_LST_MASK) == (0x5 << 26))
    > +#define DEV_LST_INACTIVE (((p) & USB_STS_LST_MASK) == (0x6 << 26))
    > +#define DEV_LST_POLLING (((p) & USB_STS_LST_MASK) == (0x7 << 26))
    > +#define DEV_LST_RECOVERY (((p) & USB_STS_LST_MASK) == (0x8 << 26))
    > +#define DEV_LST_HOT_RESET (((p) & USB_STS_LST_MASK) == (0x9 << 26))
    > +#define DEV_LST_COMP_MODE (((p) & USB_STS_LST_MASK) == (0xa << 26))
    > +#define DEV_LST_LB_STATE (((p) & USB_STS_LST_MASK) == (0xb << 26))
    > +/*
    > + * DMA clock turn-off status.
    > + * 0 - DMA clock is always on (default after hardware reset).
    > + * 1 - DMA clock turn-off in U1, U2 and U3 (SS mode) is enabled.
    > + */
    > +#define USB_STS_DMAOFF_MASK BIT(30)
    > +#define USB_STS_DMAOFF(p) ((p) & USB_STS_DMAOFF_MASK)
    > +/*
    > + * SFR Endian statuss.
    > + * 0 - Little Endian order (default after hardware reset).
    > + * 1 - Big Endian order.
    > + */
    > +#define USB_STS_ENDIAN2_MASK BIT(31)
    > +#define USB_STS_ENDIAN2(p) ((p) & USB_STS_ENDIAN2_MASK)
    > +
    > +/* USB_CMD - bitmasks */
    > +/* Set Function Address */
    > +#define USB_CMD_SET_ADDR BIT(0)
    > +/*
    > + * Function Address This field is saved to the device only when the field
    > + * SET_ADDR is set '1 ' during write to USB_CMD register.
    > + * Software is responsible for entering the address of the device during
    > + * SET_ADDRESS request service. This field should be set immediately after
    > + * the SETUP packet is decoded, and prior to confirmation of the status phase
    > + */
    > +#define USB_CMD_FADDR_MASK GENMASK(7, 1)
    > +#define USB_CMD_FADDR(p) (((p) << 1) & USB_CMD_FADDR_MASK)
    > +/* Send Function Wake Device Notification TP (used only in SS mode). */
    > +#define USB_CMD_SDNFW BIT(8)
    > +/* Set Test Mode (used only in HS/FS mode). */
    > +#define USB_CMD_STMODE BIT(9)
    > +/* Test mode selector (used only in HS/FS mode) */
    > +#define USB_STS_TMODE_SEL_MASK GENMASK(11, 10)
    > +#define USB_STS_TMODE_SEL(p) (((p) << 10) & USB_STS_TMODE_SEL_MASK)
    > +/*
    > + * Send Latency Tolerance Message Device Notification TP (used only
    > + * in SS mode).
    > + */
    > +#define USB_CMD_SDNLTM BIT(12)
    > +/* Send Custom Transaction Packet (used only in SS mode) */
    > +#define USB_CMD_SPKT BIT(13)
    > +/*Device Notification 'Function Wake' - Interface value (only in SS mode. */
    > +#define USB_CMD_DNFW_INT_MASK GENMASK(23, 16)
    > +#define USB_STS_DNFW_INT(p) (((p) << 16) & USB_CMD_DNFW_INT_MASK)
    > +/*
    > + * Device Notification 'Latency Tolerance Message' -373 BELT value [7:0]
    > + * (used only in SS mode).
    > + */
    > +#define USB_CMD_DNLTM_BELT_MASK GENMASK(27, 16)
    > +#define USB_STS_DNLTM_BELT(p) (((p) << 16) & USB_CMD_DNLTM_BELT_MASK)
    > +
    > +/* USB_ITPN - bitmasks */
    > +/*
    > + * ITP(SS) / SOF (HS/FS) number
    > + * In SS mode this field represent number of last ITP received from host.
    > + * In HS/FS mode this field represent number of last SOF received from host.
    > + */
    > +#define USB_ITPN_MASK GENMASK(13, 0)
    > +#define USB_ITPN(p) ((p) & USB_ITPN_MASK)
    > +
    > +/* USB_LPM - bitmasks */
    > +/* Host Initiated Resume Duration. */
    > +#define USB_LPM_HIRD_MASK GENMASK(3, 0)
    > +#define USB_LPM_HIRD(p) ((p) & USB_LPM_HIRD_MASK)
    > +/* Remote Wakeup Enable (bRemoteWake). */
    > +#define USB_LPM_BRW BIT(4)
    > +
    > +/* USB_IEN - bitmasks */
    > +/* SS connection interrupt enable */
    > +#define USB_IEN_CONIEN BIT(0)
    > +/* SS disconnection interrupt enable. */
    > +#define USB_IEN_DISIEN BIT(1)
    > +/* USB SS warm reset interrupt enable. */
    > +#define USB_IEN_UWRESIEN BIT(2)
    > +/* USB SS hot reset interrupt enable */
    > +#define USB_IEN_UHRESIEN BIT(3)
    > +/* SS link U3 state enter interrupt enable (suspend).*/
    > +#define USB_IEN_U3ENTIEN BIT(4)
    > +/* SS link U3 state exit interrupt enable (wakeup). */
    > +#define USB_IEN_U3EXTIEN BIT(5)
    > +/* SS link U2 state enter interrupt enable.*/
    > +#define USB_IEN_U2ENTIEN BIT(6)
    > +/* SS link U2 state exit interrupt enable.*/
    > +#define USB_IEN_U2EXTIEN BIT(7)
    > +/* SS link U1 state enter interrupt enable.*/
    > +#define USB_IEN_U1ENTIEN BIT(8)
    > +/* SS link U1 state exit interrupt enable.*/
    > +#define USB_IEN_U1EXTIEN BIT(9)
    > +/* ITP/SOF packet detected interrupt enable.*/
    > +#define USB_IEN_ITPIEN BIT(10)
    > +/* Wakeup interrupt enable.*/
    > +#define USB_IEN_WAKEIEN BIT(11)
    > +/* Send Custom Packet interrupt enable.*/
    > +#define USB_IEN_SPKTIEN BIT(12)
    > +/* HS/FS mode connection interrupt enable.*/
    > +#define USB_IEN_CON2IEN BIT(16)
    > +/* HS/FS mode disconnection interrupt enable.*/
    > +#define USB_IEN_DIS2IEN BIT(17)
    > +/* USB reset (HS/FS mode) interrupt enable.*/
    > +#define USB_IEN_U2RESIEN BIT(18)
    > +/* LPM L2 state enter interrupt enable.*/
    > +#define USB_IEN_L2ENTIEN BIT(20)
    > +/* LPM L2 state exit interrupt enable.*/
    > +#define USB_IEN_L2EXTIEN BIT(21)
    > +/* LPM L1 state enter interrupt enable.*/
    > +#define USB_IEN_L1ENTIEN BIT(24)
    > +/* LPM L1 state exit interrupt enable.*/
    > +#define USB_IEN_L1EXTIEN BIT(25)
    > +/* Configuration reset interrupt enable.*/
    > +#define USB_IEN_CFGRESIEN BIT(26)
    > +/* Start of the USB SS warm reset interrupt enable.*/
    > +#define USB_IEN_UWRESSIEN BIT(28)
    > +/* End of the USB SS warm reset interrupt enable.*/
    > +#define USB_IEN_UWRESEIEN BIT(29)
    > +
    > +#define USB_IEN_INIT (USB_IEN_U2RESIEN | USB_ISTS_DIS2I | USB_IEN_CON2IEN \
    > + | USB_IEN_UHRESIEN | USB_IEN_UWRESIEN | USB_IEN_DISIEN \
    > + | USB_IEN_CONIEN | USB_IEN_U3EXTIEN | USB_IEN_L2ENTIEN \
    > + | USB_IEN_L2EXTIEN)
    > +
    > +/* USB_ISTS - bitmasks */
    > +/* SS Connection detected. */
    > +#define USB_ISTS_CONI BIT(0)
    > +/* SS Disconnection detected. */
    > +#define USB_ISTS_DISI BIT(1)
    > +/* UUSB warm reset detectede. */
    > +#define USB_ISTS_UWRESI BIT(2)
    > +/* USB hot reset detected. */
    > +#define USB_ISTS_UHRESI BIT(3)
    > +/* U3 link state enter detected (suspend).*/
    > +#define USB_ISTS_U3ENTI BIT(4)
    > +/* U3 link state exit detected (wakeup). */
    > +#define USB_ISTS_U3EXTI BIT(5)
    > +/* U2 link state enter detected.*/
    > +#define USB_ISTS_U2ENTI BIT(6)
    > +/* U2 link state exit detected.*/
    > +#define USB_ISTS_U2EXTI BIT(7)
    > +/* U1 link state enter detected.*/
    > +#define USB_ISTS_U1ENTI BIT(8)
    > +/* U1 link state exit detected.*/
    > +#define USB_ISTS_U1EXTI BIT(9)
    > +/* ITP/SOF packet detected.*/
    > +#define USB_ISTS_ITPI BIT(10)
    > +/* Wakeup detected.*/
    > +#define USB_ISTS_WAKEI BIT(11)
    > +/* Send Custom Packet detected.*/
    > +#define USB_ISTS_SPKTI BIT(12)
    > +/* HS/FS mode connection detected.*/
    > +#define USB_ISTS_CON2I BIT(16)
    > +/* HS/FS mode disconnection detected.*/
    > +#define USB_ISTS_DIS2I BIT(17)
    > +/* USB reset (HS/FS mode) detected.*/
    > +#define USB_ISTS_U2RESI BIT(18)
    > +/* LPM L2 state enter detected.*/
    > +#define USB_ISTS_L2ENTI BIT(20)
    > +/* LPM L2 state exit detected.*/
    > +#define USB_ISTS_L2EXTI BIT(21)
    > +/* LPM L1 state enter detected.*/
    > +#define USB_ISTS_L1ENTI BIT(24)
    > +/* LPM L1 state exit detected.*/
    > +#define USB_ISTS_L1EXTI BIT(25)
    > +/* USB configuration reset detected.*/
    > +#define USB_ISTS_CFGRESI BIT(26)
    > +/* Start of the USB warm reset detected.*/
    > +#define USB_ISTS_UWRESSI BIT(28)
    > +/* End of the USB warm reset detected.*/
    > +#define USB_ISTS_UWRESEI BIT(29)
    > +
    > +/* USB_SEL - bitmasks */
    > +#define EP_SEL_EPNO_MASK GENMASK(3, 0)
    > +/* Endpoint number. */
    > +#define EP_SEL_EPNO(p) ((p) & EP_SEL_EPNO_MASK)
    > +/* Endpoint direction bit - 0 - OUT, 1 - IN. */
    > +#define EP_SEL_DIR BIT(7)
    > +
    > +#define select_ep_in(nr) (EP_SEL_EPNO(p) | EP_SEL_DIR)
    > +#define select_ep_out (EP_SEL_EPNO(p))
    > +
    > +/* EP_TRADDR - bitmasks */
    > +/* Transfer Ring address. */
    > +#define EP_TRADDR_TRADDR(p) ((p))
    > +
    > +/* EP_CFG - bitmasks */
    > +/* Endpoint enable */
    > +#define EP_CFG_ENABLE BIT(0)
    > +/*
    > + * Endpoint type.
    > + * 1 - isochronous
    > + * 2 - bulk
    > + * 3 - interrupt
    > + */
    > +#define EP_CFG_EPTYPE_MASK GENMASK(2, 1)
    > +#define EP_CFG_EPTYPE(p) (((p) << 1) & EP_CFG_EPTYPE_MASK)
    > +/* Stream support enable (only in SS mode). */
    > +#define EP_CFG_STREAM_EN BIT(3)
    > +/* TDL check (only in SS mode for BULK EP). */
    > +#define EP_CFG_TDL_CHK BIT(4)
    > +/* SID check (only in SS mode for BULK OUT EP). */
    > +#define EP_CFG_SID_CHK BIT(5)
    > +/* DMA transfer endianness. */
    > +#define EP_CFG_EPENDIAN BIT(7)
    > +/* Max burst size (used only in SS mode). */
    > +#define EP_CFG_MAXBURST_MASK GENMASK(11, 8)
    > +#define EP_CFG_MAXBURST(p) (((p) << 8) & EP_CFG_MAXBURST_MASK)
    > +/* ISO max burst. */
    > +#define EP_CFG_MULT_MASK GENMASK(15, 14)
    > +#define EP_CFG_MULT(p) (((p) << 14) & EP_CFG_MULT)
    > +/* ISO max burst. */
    > +#define EP_CFG_MAXPKTSIZE_MASK GENMASK(26, 16)
    > +#define EP_CFG_MAXPKTSIZE(p) (((p) << 16) & EP_CFG_MAXPKTSIZE_MASK)
    > +/* Max number of buffered packets. */
    > +#define EP_CFG_BUFFERING_MASK GENMASK(31, 27)
    > +#define EP_CFG_BUFFERING(p) (((p) << 27) & EP_CFG_BUFFERING_MASK)
    > +
    > +/* EP_CMD - bitmasks */
    > +/* Endpoint reset. */
    > +#define EP_CMD_EPRST BIT(0)
    > +/* Endpoint STALL set. */
    > +#define EP_CMD_SSTALL BIT(1)
    > +/* Endpoint STALL clear. */
    > +#define EP_CMD_CSTALL BIT(2)
    > +/* Send ERDY TP. */
    > +#define EP_CMD_ERDY BIT(3)
    > +/* Request complete. */
    > +#define EP_CMD_REQ_CMPL BIT(5)
    > +/* Transfer descriptor ready. */
    > +#define EP_CMD_DRDY BIT(6)
    > +/* Data flush. */
    > +#define EP_CMD_DFLUSH BIT(7)
    > +/*
    > + * Transfer Descriptor Length write (used only for Bulk Stream capable
    > + * endpoints in SS mode).
    > + */
    > +#define EP_CMD_STDL BIT(8)
    > +/* Transfer Descriptor Length (used only in SS mode for bulk endpoints). */
    > +#define EP_CMD_TDL_MASK GENMASK(15, 9)
    > +#define EP_CMD_TDL(p) (((p) << 9) & EP_CMD_TDL_MASK)
    > +/* ERDY Stream ID value (used in SS mode). */
    > +#define EP_CMD_ERDY_SID_MASK GENMASK(31, 16)
    > +#define EP_CMD_ERDY_SID(p) (((p) << 16) & EP_CMD_SID_MASK)
    > +
    > +/* EP_STS - bitmasks */
    > +/* Setup transfer complete. */
    > +#define EP_STS_SETUP BIT(0)
    > +/* Endpoint STALL status. */
    > +#define EP_STS_STALL(p) ((p) & BIT(1))
    > +/* Interrupt On Complete. */
    > +#define EP_STS_IOC BIT(2)
    > +/* Interrupt on Short Packet. */
    > +#define EP_STS_ISP BIT(3)
    > +/* Transfer descriptor missing. */
    > +#define EP_STS_DESCMIS BIT(4)
    > +/* Stream Rejected (used only in SS mode) */
    > +#define EP_STS_STREAMR BIT(5)
    > +/* EXIT from MOVE DATA State (used only for stream transfers in SS mode). */
    > +#define EP_STS_MD_EXIT BIT(6)
    > +/* TRB error. */
    > +#define EP_STS_TRBERR BIT(7)
    > +/* Not ready (used only in SS mode). */
    > +#define EP_STS_NRDY BIT(8)
    > +/* DMA busy. */
    > +#define EP_STS_DBUSY(p) ((p) & BIT(9))
    > +/* Endpoint Buffer Empty */
    > +#define EP_STS_BUFFEMPTY(p) ((p) & BIT(10))
    > +/* Current Cycle Status */
    > +#define EP_STS_CCS(p) ((p) & BIT(11))
    > +/* Prime (used only in SS mode. */
    > +#define EP_STS_PRIME BIT(12)
    > +/* Stream error (used only in SS mode). */
    > +#define EP_STS_SIDERR BIT(13)
    > +/* OUT size mismatch. */
    > +#define EP_STS_OUTSMM BIT(14)
    > +/* ISO transmission error. */
    > +#define EP_STS_ISOERR BIT(15)
    > +/* Host Packet Pending (only for SS mode). */
    > +#define EP_STS_HOSTPP(p) ((p) & BIT(16))
    > +/* Stream Protocol State Machine State (only for Bulk stream endpoints). */
    > +#define EP_STS_SPSMST_MASK GENMASK(18, 17)
    > +#define EP_STS_SPSMST_DISABLED(p) (((p) & EP_STS_SPSMST_MASK) >> 17)
    > +#define EP_STS_SPSMST_IDLE(p) (((p) & EP_STS_SPSMST_MASK) >> 17)
    > +#define EP_STS_SPSMST_START_STREAM(p) (((p) & EP_STS_SPSMST_MASK) >> 17)
    > +#define EP_STS_SPSMST_MOVE_DATA(p) (((p) & EP_STS_SPSMST_MASK) >> 17)
    > +/* Interrupt On Transfer complete. */
    > +#define EP_STS_IOT BIT(19)
    > +/* OUT queue endpoint number. */
    > +#define EP_STS_OUTQ_NO_MASK GENMASK(27, 24)
    > +#define EP_STS_OUTQ_NO(p) (((p) & EP_STS_OUTQ_NO_MASK) >> 24)
    > +/* OUT queue valid flag. */
    > +#define EP_STS_OUTQ_VAL_MASK BIT(28)
    > +#define EP_STS_OUTQ_VAL(p) ((p) & EP_STS_OUTQ_VAL_MASK)
    > +/* SETUP WAIT. */
    > +#define EP_STS_STPWAIT BIT(31)
    > +
    > +/* EP_STS_SID - bitmasks */
    > +/* Stream ID (used only in SS mode). */
    > +#define EP_STS_SID_MASK GENMASK(15, 0)
    > +#define EP_STS_SID(p) ((p) & EP_STS_SID_MASK)
    > +
    > +/* EP_STS_EN - bitmasks */
    > +/* SETUP interrupt enable. */
    > +#define EP_STS_EN_SETUPEN BIT(0)
    > +/* OUT transfer missing descriptor enable. */
    > +#define EP_STS_EN_DESCMISEN BIT(4)
    > +/* Stream Rejected enable. */
    > +#define EP_STS_EN_STREAMREN BIT(5)
    > +/* Move Data Exit enable.*/
    > +#define EP_STS_EN_MD_EXITEN BIT(6)
    > +/* TRB enable. */
    > +#define EP_STS_EN_TRBERREN BIT(7)
    > +/* NRDY enable. */
    > +#define EP_STS_EN_NRDYEN BIT(8)
    > +/* Prime enable. */
    > +#define EP_STS_EN_PRIMEEEN BIT(12)
    > +/* Stream error enable. */
    > +#define EP_STS_EN_SIDERREN BIT(13)
    > +/* OUT size mismatch enable. */
    > +#define EP_STS_EN_OUTSMMEN BIT(14)
    > +/* ISO transmission error enable. */
    > +#define EP_STS_EN_ISOERREN BIT(15)
    > +/* Interrupt on Transmission complete enable. */
    > +#define EP_STS_EN_IOTEN BIT(19)
    > +/* Setup Wait interrupt enable. */
    > +#define EP_STS_EN_STPWAITEN BIT(31)
    > +
    > +/* DRBL- bitmasks */
    > +#define DB_VALUE_BY_INDEX(index) (1 << (index))
    > +#define DB_VALUE_EP0_OUT BIT(0)
    > +#define DB_VALUE_EP0_IN BIT(16)
    > +
    > +/* EP_IEN - bitmasks */
    > +#define EP_IEN(index) (1 << (index))
    > +#define EP_IEN_EP_OUT0 BIT(0)
    > +#define EP_IEN_EP_IN0 BIT(16)
    > +
    > +/* EP_ISTS - bitmasks */
    > +#define EP_ISTS(index) (1 << (index))
    > +#define EP_ISTS_EP_OUT0 BIT(0)
    > +#define EP_ISTS_EP_IN0 BIT(16)
    > +
    > +/* EP_PWR- bitmasks */
    > +/*Power Shut Off capability enable*/
    > +#define PUSB_PWR_PSO_EN BIT(0)
    > +/*Power Shut Off capability disable*/
    > +#define PUSB_PWR_PSO_DS BIT(1)
    > +/*
    > + * Enables turning-off Reference Clock.
    > + * This bit is optional and implemented only when support for OTG is
    > + * implemented (indicated by OTG_READY bit set to '1').
    > + */
    > +#define PUSB_PWR_STB_CLK_SWITCH_EN BIT(8)
    > +/*
    > + * Status bit indicating that operation required by STB_CLK_SWITCH_EN write
    > + * is completed
    > + */
    > +#define PUSB_PWR_STB_CLK_SWITCH_DONE BIT(9)
    > +/* This bit informs if Fast Registers Access is enabled. */
    > +#define PUSB_PWR_FST_REG_ACCESS_STAT BIT(30)
    > +/* Fast Registers Access Enable. */
    > +#define PUSB_PWR_FST_REG_ACCESS BIT(31)
    > +
    > +/* USB_CAP1- bitmasks */
    > +/*
    > + * SFR Interface type
    > + * These field reflects type of SFR interface implemented:
    > + * 0x0 - OCP
    > + * 0x1 - AHB,
    > + * 0x2 - PLB
    > + * 0x3 - AXI
    > + * 0x4-0xF - reserved
    > + */
    > +#define USB_CAP1_SFR_TYPE_MASK GENMASK(3, 0)
    > +#define DEV_SFR_TYPE_OCP(p) (((p) & USB_CAP1_SFR_TYPE_MASK) == 0x0)
    > +#define DEV_SFR_TYPE_AHB(p) (((p) & USB_CAP1_SFR_TYPE_MASK) == 0x1)
    > +#define DEV_SFR_TYPE_PLB(p) (((p) & USB_CAP1_SFR_TYPE_MASK) == 0x2)
    > +#define DEV_SFR_TYPE_AXI(p) (((p) & USB_CAP1_SFR_TYPE_MASK) == 0x3)
    > +/*
    > + * SFR Interface width
    > + * These field reflects width of SFR interface implemented:
    > + * 0x0 - 8 bit interface,
    > + * 0x1 - 16 bit interface,
    > + * 0x2 - 32 bit interface
    > + * 0x3 - 64 bit interface
    > + * 0x4-0xF - reserved
    > + */
    > +#define USB_CAP1_SFR_WIDTH_MASK GENMASK(7, 4)
    > +#define DEV_SFR_WIDTH_8(p) (((p) & USB_CAP1_SFR_WIDTH_MASK) == (0x0 << 4))
    > +#define DEV_SFR_WIDTH_16(p) (((p) & USB_CAP1_SFR_WIDTH_MASK) == (0x1 << 4))
    > +#define DEV_SFR_WIDTH_32(p) (((p) & USB_CAP1_SFR_WIDTH_MASK) == (0x2 << 4))
    > +#define DEV_SFR_WIDTH_64(p) (((p) & USB_CAP1_SFR_WIDTH_MASK) == (0x3 << 4))
    > +/*
    > + * DMA Interface type
    > + * These field reflects type of DMA interface implemented:
    > + * 0x0 - OCP
    > + * 0x1 - AHB,
    > + * 0x2 - PLB
    > + * 0x3 - AXI
    > + * 0x4-0xF - reserved
    > + */
    > +#define USB_CAP1_DMA_TYPE_MASK GENMASK(11, 8)
    > +#define DEV_DMA_TYPE_OCP(p) (((p) & USB_CAP1_DMA_TYPE_MASK) == (0x0 << 8))
    > +#define DEV_DMA_TYPE_AHB(p) (((p) & USB_CAP1_DMA_TYPE_MASK) == (0x1 << 8))
    > +#define DEV_DMA_TYPE_PLB(p) (((p) & USB_CAP1_DMA_TYPE_MASK) == (0x2 << 8))
    > +#define DEV_DMA_TYPE_AXI(p) (((p) & USB_CAP1_DMA_TYPE_MASK) == (0x3 << 8))
    > +/*
    > + * DMA Interface width
    > + * These field reflects width of DMA interface implemented:
    > + * 0x0 - reserved,
    > + * 0x1 - reserved,
    > + * 0x2 - 32 bit interface
    > + * 0x3 - 64 bit interface
    > + * 0x4-0xF - reserved
    > + */
    > +#define USB_CAP1_DMA_WIDTH_MASK GENMASK(15, 12)
    > +#define DEV_DMA_WIDTH_32(p) (((p) & USB_CAP1_DMA_WIDTH_MASK) == (0x2 << 12))
    > +#define DEV_DMA_WIDTH_64(p) (((p) & USB_CAP1_DMA_WIDTH_MASK) == (0x3 << 12))
    > +/*
    > + * USB3 PHY Interface type
    > + * These field reflects type of USB3 PHY interface implemented:
    > + * 0x0 - USB PIPE,
    > + * 0x1 - RMMI,
    > + * 0x2-0xF - reserved
    > + */
    > +#define USB_CAP1_U3PHY_TYPE_MASK GENMASK(19, 16)
    > +#define DEV_U3PHY_PIPE(p) (((p) & USB_CAP1_U3PHY_TYPE_MASK) == (0x0 << 16))
    > +#define DEV_U3PHY_RMMI(p) (((p) & USB_CAP1_U3PHY_TYPE_MASK) == (0x1 << 16))
    > +/*
    > + * USB3 PHY Interface width
    > + * These field reflects width of USB3 PHY interface implemented:
    > + * 0x0 - 8 bit PIPE interface,
    > + * 0x1 - 16 bit PIPE interface,
    > + * 0x2 - 32 bit PIPE interface,
    > + * 0x3 - 64 bit PIPE interface
    > + * 0x4-0xF - reserved
    > + * Note: When SSIC interface is implemented this field shows the width of
    > + * internal PIPE interface. The RMMI interface is always 20bit wide.
    > + */
    > +#define USB_CAP1_U3PHY_WIDTH_MASK GENMASK(23, 20)
    > +#define DEV_U3PHY_WIDTH_8(p) \
    > + (((p) & USB_CAP1_U3PHY_WIDTH_MASK) == (0x0 << 20))
    > +#define DEV_U3PHY_WIDTH_16(p) \
    > + (((p) & USB_CAP1_U3PHY_WIDTH_MASK) == (0x1 << 16))
    > +#define DEV_U3PHY_WIDTH_32(p) \
    > + (((p) & USB_CAP1_U3PHY_WIDTH_MASK) == (0x2 << 20))
    > +#define DEV_U3PHY_WIDTH_64(p) \
    > + (((p) & USB_CAP1_U3PHY_WIDTH_MASK) == (0x3 << 16))
    > +
    > +/*
    > + * USB2 PHY Interface enable
    > + * These field informs if USB2 PHY interface is implemented:
    > + * 0x0 - interface NOT implemented,
    > + * 0x1 - interface implemented
    > + */
    > +#define USB_CAP1_U2PHY_EN(p) ((p) & BIT(24))
    > +/*
    > + * USB2 PHY Interface type
    > + * These field reflects type of USB2 PHY interface implemented:
    > + * 0x0 - UTMI,
    > + * 0x1 - ULPI
    > + */
    > +#define DEV_U2PHY_ULPI(p) ((p) & BIT(25))
    > +/*
    > + * USB2 PHY Interface width
    > + * These field reflects width of USB2 PHY interface implemented:
    > + * 0x0 - 8 bit interface,
    > + * 0x1 - 16 bit interface,
    > + * Note: The ULPI interface is always 8bit wide.
    > + */
    > +#define DEV_U2PHY_WIDTH_16(p) ((p) & BIT(26))
    > +/*
    > + * OTG Ready
    > + * 0x0 - pure device mode
    > + * 0x1 - some features and ports for CDNS USB OTG controller are implemented.
    > + */
    > +#define USB_CAP1_OTG_READY(p) ((p) & BIT(27))
    > +
    > +/* USB_CAP2- bitmasks */
    > +/*
    > + * The actual size of the connected On-chip RAM memory in kB:
    > + * - 0 means 256 kB (max supported mem size)
    > + * - value other than 0 reflects the mem size in kB
    > + */
    > +#define USB_CAP2_ACTUAL_MEM_SIZE(p) ((p) & GENMASK(7, 0))
    > +/*
    > + * Max supported mem size
    > + * These field reflects width of on-chip RAM address bus width,
    > + * which determines max supported mem size:
    > + * 0x0-0x7 - reserved,
    > + * 0x8 - support for 4kB mem,
    > + * 0x9 - support for 8kB mem,
    > + * 0xA - support for 16kB mem,
    > + * 0xB - support for 32kB mem,
    > + * 0xC - support for 64kB mem,
    > + * 0xD - support for 128kB mem,
    > + * 0xE - support for 256kB mem,
    > + * 0xF - reserved
    > + */
    > +#define USB_CAP2_MAX_MEM_SIZE(p) ((p) & GENMASK(11, 8))
    > +
    > +/* USB_CAP3- bitmasks */
    > +#define EP_IS_IMPLEMENTED(reg, index) ((reg) & (1 << (index)))
    > +
    > +/* USB_CAP4- bitmasks */
    > +#define EP_SUPPORT_ISO(reg, index) ((reg) & (1 << (index)))
    > +
    > +/* USB_CAP5- bitmasks */
    > +#define EP_SUPPORT_STREAM(reg, index) ((reg) & (1 << (index)))
    > +
    > +/* USB_CAP6- bitmasks */
    > +/* The USBSS-DEV Controller Internal build number. */
    > +#define GET_DEV_VERSION__INTERNAL_NUMBER(p) ((p) & GENMASK(7, 0))
    > +/* The USBSS-DEV Controller version number. */
    > +#define GET_DEV_VERSION(p) ((p) & GENMASK(31, 8))
    > +
    > +/* DBG_LINK1- bitmasks */
    > +/*
    > + * LFPS_MIN_DET_U1_EXIT value This parameter configures the minimum
    > + * time required for decoding the received LFPS as an LFPS.U1_Exit.
    > + */
    > +#define DBG_LINK1_LFPS_MIN_DET_U1_EXIT(p) ((p) & GENMASK(7, 0))
    > +/*
    > + * LFPS_MIN_GEN_U1_EXIT value This parameter configures the minimum time for
    > + * phytxelecidle deassertion when LFPS.U1_Exit
    > + */
    > +#define DBG_LINK1_LFPS_MIN_GEN_U1_EXIT(p) (((p) << 8) & GENMASK(15, 8))
    > +/*
    > + * RXDET_BREAK_DIS value This parameter configures terminating the Far-end
    > + * Receiver termination detection sequence:
    > + * 0: it is possible that USBSS_DEV will terminate Farend receiver
    > + * termination detection sequence
    > + * 1: USBSS_DEV will not terminate Far-end receiver termination
    > + * detection sequence
    > + */
    > +#define DBG_LINK1_RXDET_BREAK_DIS BIT(16)
    > +/* LFPS_GEN_PING value This parameter configures the LFPS.Ping generation */
    > +#define DBG_LINK1_LFPS_GEN_PING(p) (((p) << 17) & GENMASK(21, 17))
    > +/*
    > + * Set the LFPS_MIN_DET_U1_EXIT value Writing '1' to this bit writes the
    > + * LFPS_MIN_DET_U1_EXIT field value to the device. This bit is automatically
    > + * cleared. Writing '0' has no effect
    > + */
    > +#define DBG_LINK1_LFPS_MIN_DET_U1_EXIT_SET BIT(24)
    > +/*
    > + * Set the LFPS_MIN_GEN_U1_EXIT value. Writing '1' to this bit writes the
    > + * LFPS_MIN_GEN_U1_EXIT field value to the device. This bit is automatically
    > + * cleared. Writing '0' has no effect
    > + */
    > +#define DBG_LINK1_LFPS_MIN_GEN_U1_EXIT_SET BIT(25)
    > +/*
    > + * Set the RXDET_BREAK_DIS value Writing '1' to this bit writes
    > + * the RXDET_BREAK_DIS field value to the device. This bit is automatically
    > + * cleared. Writing '0' has no effect
    > + */
    > +#define DBG_LINK1_RXDET_BREAK_DIS_SET BIT(26)
    > +/*
    > + * Set the LFPS_GEN_PING_SET value Writing '1' to this bit writes
    > + * the LFPS_GEN_PING field value to the device. This bit is automatically
    > + * cleared. Writing '0' has no effect."
    > + */
    > +#define DBG_LINK1_LFPS_GEN_PING_SET BIT(27)
    > +
    > +#define gadget_to_cdns3_device(g) (container_of(g, struct cdns3_device, gadget))
    > +
    > +#define ep_to_cdns3_ep(ep) (container_of(ep, struct cdns3_endpoint, endpoint))
    > +
    > +/*-------------------------------------------------------------------------*/
    > +/*
    > + * USBSS-DEV DMA interface.
    > + */
    > +#define TRBS_PER_SEGMENT 40
    > +
    > +#define ISO_MAX_INTERVAL 10
    > +
    > +/*
    > + *Only for ISOC endpoints - maximum number of TRBs is calculated as
    > + * pow(2, bInterval-1) * number of usb requests. It is limitation made by
    > + * driver to save memory. Controller must prepare TRB for each ITP even
    > + * if bInterval > 1. It's the reason why driver needs so many TRBs for
    > + * isochronous endpoints.
    > + */
    > +#define TRBS_PER_ISOC_SEGMENT (ISO_MAX_INTERVAL * 8)
    > +
    > +#define GET_TRBS_PER_SEGMENT(ep_type) ((ep_type) == USB_ENDPOINT_XFER_ISOC ? \
    > + TRBS_PER_ISOC_SEGMENT : TRBS_PER_SEGMENT)
    > +/**
    > + * struct cdns3_trb - represent Transfer Descriptor block.
    > + * @buffer: pointer to buffer data
    > + * @length: length of data
    > + * @control: control flags.
    > + *
    > + * This structure describes transfer block serviced by DMA module.
    > + */
    > +struct cdns3_trb {
    > + __le32 buffer;
    > + __le32 length;
    > + __le32 control;
    > +};
    > +
    > +#define TRB_SIZE (sizeof(struct cdns3_trb))
    > +#define TRB_RING_SIZE (TRB_SIZE * TRBS_PER_SEGMENT)
    > +#define TRB_ISO_RING_SIZE (TRB_SIZE * TRBS_PER_ISOC_SEGMENT)
    > +#define TRB_CTRL_RING_SIZE (TRB_SIZE * 2)
    > +
    > +/* TRB bit mask */
    > +#define TRB_TYPE_BITMASK GENMASK(15, 10)
    > +#define TRB_TYPE(p) ((p) << 10)
    > +#define TRB_FIELD_TO_TYPE(p) (((p) & TRB_TYPE_BITMASK) >> 10)
    > +
    > +/* TRB type IDs */
    > +/* bulk, interrupt, isoc , and control data stage */
    > +#define TRB_NORMAL 1
    > +/* TRB for linking ring segments */
    > +#define TRB_LINK 6
    > +
    > +/* Cycle bit - indicates TRB ownership by driver or hw*/
    > +#define TRB_CYCLE BIT(0)
    > +/*
    > + * When set to '1', the device will toggle its interpretation of the Cycle bit
    > + */
    > +#define TRB_TOGGLE BIT(1)
    > +
    > +/* Interrupt on short packet*/
    > +#define TRB_ISP BIT(2)
    > +/*Setting this bit enables FIFO DMA operation mode*/
    > +#define TRB_FIFO_MODE BIT(3)
    > +/* Set PCIe no snoop attribute */
    > +#define TRB_CHAIN BIT(4)
    > +/* Interrupt on completion */
    > +#define TRB_IOC BIT(5)
    > +
    > +/* stream ID bitmasks. */
    > +#define TRB_STREAM_ID(p) ((p) & GENMASK(31, 16))
    > +
    > +/* transfer_len bitmasks. */
    > +#define TRB_LEN(p) ((p) & GENMASK(16, 0))
    > +
    > +/* transfer_len bitmasks - bits 31:24 */
    > +#define TRB_BURST_LEN(p) ((p) & GENMASK(31, 24))
    > +
    > +/* Data buffer pointer bitmasks*/
    > +#define TRB_BUFFER(p) ((p) & GENMASK(31, 0))
    > +
    > +/*-------------------------------------------------------------------------*/
    > +/* Driver numeric constants */
    > +
    > +/* Such declaration should be added to ch9.h */
    > +#define USB_DEVICE_MAX_ADDRESS 127
    > +
    > +/* Endpoint init values */
    > +#define CDNS3_EP_MAX_PACKET_LIMIT 1024
    > +#define CDNS3_EP_MAX_STREAMS 15
    > +#define CDNS3_EP0_MAX_PACKET_LIMIT 512
    > +
    > +/* All endpoints including EP0 */
    > +#define CDNS3_ENDPOINTS_MAX_COUNT 32
    > +#define CDNS3_EP_ZLP_BUF_SIZE 1024
    > +
    > +#define CDNS3_EP_BUF_SIZE 2 /* KB */
    > +#define CDNS3_ALIGNED_BUF_SIZE 16384 /* Bytes */
    > +#define CDNS3_MAX_NUM_DESCMISS_BUF 32
    > +#define CDNS3_DESCMIS_BUF_SIZE 2048 /* Bytes */
    > +/*-------------------------------------------------------------------------*/
    > +/* Used structs */
    > +
    > +struct cdns3_device;
    > +
    > +/**
    > + * struct cdns3_endpoint - extended device side representation of USB endpoint.
    > + * @endpoint: usb endpoint
    > + * @pending_req_list: list of requests queuing on transfer ring.
    > + * @deferred_req_list: list of requests waiting for queuing on transfer ring.
    > + * @descmiss_req_list: list of requests internally allocated by driver (WA1).
    > + * @trb_pool: transfer ring - array of transaction buffers
    > + * @trb_pool_dma: dma address of transfer ring
    > + * @cdns3_dev: device associated with this endpoint
    > + * @name: a human readable name e.g. ep1out
    > + * @flags: specify the current state of endpoint
    > + * @descmis_req: internal transfer object used for getting data from on-chip
    > + * buffer. It can happen only if function driver doesn't send usb_request
    > + * object on time.
    > + * @aligned_buff: aligned to 8 bytes data buffer. Buffer address used in
    > + * TRB shall be aligned to 8.
    > + * @aligned_dma_addr: dma address of aligned_buff
    > + * @dir: endpoint direction
    > + * @num: endpoint number (1 - 15)
    > + * @type: set to bmAttributes & USB_ENDPOINT_XFERTYPE_MASK
    > + * @interval: interval between packets used for ISOC endpoint.
    > + * @free_trbs: number of free TRBs in transfer ring
    > + * @num_trbs: number of all TRBs in transfer ring
    > + * @pcs: producer cycle state
    > + * @ccs: consumer cycle state
    > + * @enqueue: enqueue index in transfer ring
    > + * @dequeue: dequeue index in transfer ring
    > + */
    > +struct cdns3_endpoint {
    > + struct usb_ep endpoint;
    > + struct list_head pending_req_list;
    > + struct list_head deferred_req_list;
    > + struct list_head descmiss_req_list;
    > +
    > + struct cdns3_trb *trb_pool;
    > + dma_addr_t trb_pool_dma;
    > +
    > + struct cdns3_device *cdns3_dev;
    > + char name[20];
    > +
    > +#define EP_ENABLED BIT(0)
    > +#define EP_STALL BIT(1)
    > +#define EP_WEDGE BIT(2)
    > +#define EP_TRANSFER_STARTED BIT(3)
    > +#define EP_UPDATE_EP_TRBADDR BIT(4)
    > +#define EP_PENDING_REQUEST BIT(5)
    > +#define EP_RING_FULL BIT(6)
    > +#define EP_CLAIMED BIT(7)
    > +#define EP_QUIRK_EXTRA_BUF_DET BIT(8)
    > +#define EP_QUIRK_EXTRA_BUF_EN BIT(9)
    > +#define EP_QUIRK_END_TRANSFER BIT(10)
    > +
    > + u32 flags;
    > +
    > + struct cdns3_request *descmis_req;
    > +
    > + void *aligned_buff;
    > + dma_addr_t aligned_dma_addr;
    > + u8 dir;
    > + u8 num;
    > + u8 type;
    > + int interval;
    > +
    > + int free_trbs;
    > + int num_trbs;
    > + u8 pcs;
    > + u8 ccs;
    > + int enqueue;
    > + int dequeue;
    > +};
    > +
    > +/**
    > + * struct cdns3_request - extended device side representation of usb_request
    > + * object .
    > + * @request: generic usb_request object describing single I/O request.
    > + * @priv_ep: extended representation of usb_ep object
    > + * @trb: the first TRB association with this request
    > + * @start_trb: number of the first TRB in transfer ring
    > + * @end_trb: number of the last TRB in transfer ring
    > + * @flags: flag specifying special usage of request
    > + * @list: used by internally allocated request to add to descmiss_req_list.
    > + */
    > +struct cdns3_request {
    > + struct usb_request request;
    > + struct cdns3_endpoint *priv_ep;
    > + struct cdns3_trb *trb;
    > + int start_trb;
    > + int end_trb;
    > +#define REQUEST_PENDING BIT(0)
    > +#define REQUEST_INTERNAL BIT(1)
    > +#define REQUEST_INTERNAL_CH BIT(2)
    > +#define REQUEST_ZLP BIT(3)
    > + u32 flags;
    > + struct list_head list;
    > +};
    > +
    > +#define to_cdns3_request(r) (container_of(r, struct cdns3_request, request))
    > +
    > +/*Stages used during enumeration process.*/
    > +#define CDNS3_SETUP_STAGE 0x0
    > +#define CDNS3_DATA_STAGE 0x1
    > +#define CDNS3_STATUS_STAGE 0x2
    > +
    > +/**
    > + * struct cdns3_device - represent USB device.
    > + * @dev: pointer to device structure associated whit this controller
    > + * @sysdev: pointer to the DMA capable device
    > + * @gadget: device side representation of the peripheral controller
    > + * @gadget_driver: pointer to the gadget driver
    > + * @dev_ver: device controller version.
    > + * @lock: for synchronizing
    > + * @regs: base address for device side registers
    > + * @setup_buf: used while processing usb control requests
    > + * @setup_dma: dma address for setup_buf
    > + * @zlp_buf - zlp buffer
    > + * @ep0_stage: ep0 stage during enumeration process.
    > + * @ep0_data_dir: direction for control transfer
    > + * @eps: array of pointers to all endpoints with exclusion ep0
    > + * @selected_ep: actually selected endpoint. It's used only to improve
    > + * performance.
    > + * @isoch_delay: value from Set Isoch Delay request. Only valid on SS/SSP.
    > + * @u1_allowed: allow device transition to u1 state
    > + * @u2_allowed: allow device transition to u2 state
    > + * @is_selfpowered: device is self powered
    > + * @setup_pending: setup packet is processing by gadget driver
    > + * @hw_configured_flag: hardware endpoint configuration was set.
    > + * @wake_up_flag: allow device to remote up the host
    > + * @status_completion_no_call: indicate that driver is waiting for status s
    > + * stage completion. It's used in deferred SET_CONFIGURATION request.
    > + * @onchip_mem_allocated_size: actual size of on-chip memory assigned
    > + * to endpoints
    > + * @pending_status_wq: workqueue handling status stage for deferred requests.
    > + * @pending_status_request: request for which status stage was deferred
    > + */
    > +struct cdns3_device {
    > + struct device *dev;
    > + struct device *sysdev;
    > +
    > + struct usb_gadget gadget;
    > + struct usb_gadget_driver *gadget_driver;
    > +
    > +#define CDNS_REVISION_V0 0x00024501
    > +#define CDNS_REVISION_V1 0x00024509
    > + u32 dev_ver;
    > +
    > + /* generic spin-lock for drivers */
    > + spinlock_t lock;
    > +
    > + struct cdns3_usb_regs __iomem *regs;
    > +
    > + struct usb_ctrlrequest *setup_buf;
    > + dma_addr_t setup_dma;
    > + void *zlp_buf;
    > +
    > + u8 ep0_stage;
    > + int ep0_data_dir;
    > +
    > + struct cdns3_endpoint *eps[CDNS3_ENDPOINTS_MAX_COUNT];
    > +
    > + u32 selected_ep;
    > + u16 isoch_delay;
    > +
    > + unsigned u1_allowed:1;
    > + unsigned u2_allowed:1;
    > + unsigned is_selfpowered:1;
    > + unsigned setup_pending:1;
    > + int hw_configured_flag:1;
    > + int wake_up_flag:1;
    > + unsigned status_completion_no_call:1;
    > +
    > + struct work_struct pending_status_wq;
    > + struct usb_request *pending_status_request;
    > +
    > + /*in KB */
    > + int onchip_mem_allocated_size;
    > +};
    > +
    > +int cdns3_handshake(void __iomem *ptr, u32 mask, u32 done, int usec);
    > +void cdns3_set_register_bit(void __iomem *ptr, u32 mask);
    > +dma_addr_t cdns3_trb_virt_to_dma(struct cdns3_endpoint *priv_ep,
    > + struct cdns3_trb *trb);
    > +enum usb_device_speed cdns3_get_speed(struct cdns3_device *priv_dev);
    > +void cdns3_pending_setup_status_handler(struct work_struct *work);
    > +void cdns3_hw_reset_eps_config(struct cdns3_device *priv_dev);
    > +void cdns3_set_hw_configuration(struct cdns3_device *priv_dev);
    > +void cdns3_select_ep(struct cdns3_device *priv_dev, u32 ep);
    > +void cdns3_allow_enable_l1(struct cdns3_device *priv_dev, int enable);
    > +struct usb_request *cdns3_next_request(struct list_head *list);
    > +int cdns3_ep_run_transfer(struct cdns3_endpoint *priv_ep,
    > + struct usb_request *request);
    > +int cdns3_allocate_trb_pool(struct cdns3_endpoint *priv_ep);
    > +u8 cdns3_ep_addr_to_index(u8 ep_addr);
    > +int cdns3_gadget_ep_set_wedge(struct usb_ep *ep);
    > +int cdns3_gadget_ep_set_halt(struct usb_ep *ep, int value);
    > +struct usb_request *cdns3_gadget_ep_alloc_request(struct usb_ep *ep,
    > + gfp_t gfp_flags);
    > +void cdns3_gadget_ep_free_request(struct usb_ep *ep,
    > + struct usb_request *request);
    > +int cdns3_gadget_ep_dequeue(struct usb_ep *ep, struct usb_request *request);
    > +void cdns3_gadget_giveback(struct cdns3_endpoint *priv_ep,
    > + struct cdns3_request *priv_req,
    > + int status);
    > +
    > +int cdns3_init_ep0(struct cdns3_device *priv_dev,
    > + struct cdns3_endpoint *priv_ep);
    > +void cdns3_ep0_config(struct cdns3_device *priv_dev);
    > +void cdns3_ep_config(struct cdns3_endpoint *priv_ep);
    > +void cdns3_check_ep0_interrupt_proceed(struct cdns3_device *priv_dev, int dir);
    > +
    > +#endif /* __LINUX_CDNS3_GADGET */
    > diff --git a/drivers/usb/cdns3/host-export.h b/drivers/usb/cdns3/host-export.h
    > new file mode 100644
    > index 000000000000..b498a170b7e8
    > --- /dev/null
    > +++ b/drivers/usb/cdns3/host-export.h
    > @@ -0,0 +1,28 @@
    > +/* SPDX-License-Identifier: GPL-2.0 */
    > +/*
    > + * Cadence USBSS DRD Driver - Host Export APIs
    > + *
    > + * Copyright (C) 2017-2018 NXP
    > + *
    > + * Authors: Peter Chen <peter.chen@nxp.com>
    > + */
    > +#ifndef __LINUX_CDNS3_HOST_EXPORT
    > +#define __LINUX_CDNS3_HOST_EXPORT
    > +
    > +#ifdef CONFIG_USB_CDNS3_HOST
    > +
    > +int cdns3_host_init(struct cdns3 *cdns);
    > +void cdns3_host_exit(struct cdns3 *cdns);
    > +
    > +#else
    > +
    > +static inline int cdns3_host_init(struct cdns3 *cdns)
    > +{
    > + return -ENXIO;
    > +}
    > +
    > +static inline void cdns3_host_exit(struct cdns3 *cdns) { }
    > +
    > +#endif /* CONFIG_USB_CDNS3_HOST */
    > +
    > +#endif /* __LINUX_CDNS3_HOST_EXPORT */
    > diff --git a/drivers/usb/cdns3/host.c b/drivers/usb/cdns3/host.c
    > new file mode 100644
    > index 000000000000..b43b0236a885
    > --- /dev/null
    > +++ b/drivers/usb/cdns3/host.c
    > @@ -0,0 +1,72 @@
    > +// SPDX-License-Identifier: GPL-2.0
    > +/*
    > + * Cadence USBSS DRD Driver - host side
    > + *
    > + * Copyright (C) 2018 Cadence Design Systems.
    > + * Copyright (C) 2017-2018 NXP
    > + *
    > + * Authors: Peter Chen <peter.chen@nxp.com>
    > + * Pawel Laszczak <pawell@cadence.com>
    > + */
    > +
    > +#include <linux/platform_device.h>
    > +#include "core.h"
    > +
    > +static int __cdns3_host_init(struct cdns3 *cdns)
    > +{
    > + struct platform_device *xhci;
    > + int ret;
    > +
    > + xhci = platform_device_alloc("xhci-hcd", PLATFORM_DEVID_AUTO);
    > + if (!xhci) {
    > + dev_err(cdns->dev, "couldn't allocate xHCI device\n");
    > + return -ENOMEM;
    > + }
    > +
    > + xhci->dev.parent = cdns->dev;
    > + cdns->host_dev = xhci;
    > +
    > + ret = platform_device_add_resources(xhci, cdns->xhci_res,
    > + CDNS3_XHCI_RESOURCES_NUM);
    > + if (ret) {
    > + dev_err(cdns->dev, "couldn't add resources to xHCI device\n");
    > + goto err1;
    > + }
    > +
    > + ret = platform_device_add(xhci);
    > + if (ret) {
    > + dev_err(cdns->dev, "failed to register xHCI device\n");
    > + goto err1;
    > + }
    > +
    > + return 0;
    > +err1:
    > + platform_device_put(xhci);
    > + return ret;
    > +}
    > +
    > +static void cdns3_host_exit(struct cdns3 *cdns)
    > +{
    > + platform_device_unregister(cdns->host_dev);
    > + cdns->host_dev = NULL;
    > +}
    > +
    > +int cdns3_host_init(struct cdns3 *cdns)
    > +{
    > + struct cdns3_role_driver *rdrv;
    > +
    > + rdrv = devm_kzalloc(cdns->dev, sizeof(*rdrv), GFP_KERNEL);
    > + if (!rdrv)
    > + return -ENOMEM;
    > +
    > + rdrv->start = __cdns3_host_init;
    > + rdrv->stop = cdns3_host_exit;
    > + rdrv->state = CDNS3_ROLE_STATE_INACTIVE;
    > + rdrv->suspend = NULL;
    > + rdrv->resume = NULL;
    > + rdrv->name = "host";
    > +
    > + cdns->roles[CDNS3_ROLE_HOST] = rdrv;
    > +
    > + return 0;
    > +}
    > diff --git a/drivers/usb/cdns3/trace.c b/drivers/usb/cdns3/trace.c
    > new file mode 100644
    > index 000000000000..587ae08e019d
    > --- /dev/null
    > +++ b/drivers/usb/cdns3/trace.c
    > @@ -0,0 +1,11 @@
    > +// SPDX-License-Identifier: GPL-2.0
    > +/*
    > + * USBSS device controller driver Trace Support
    > + *
    > + * Copyright (C) 2018 Cadence.
    > + *
    > + * Author: Pawel Laszczak <pawell@cadence.com>
    > + */
    > +
    > +#define CREATE_TRACE_POINTS
    > +#include "trace.h"
    > diff --git a/drivers/usb/cdns3/trace.h b/drivers/usb/cdns3/trace.h
    > new file mode 100644
    > index 000000000000..f3d7a91fae86
    > --- /dev/null
    > +++ b/drivers/usb/cdns3/trace.h
    > @@ -0,0 +1,389 @@
    > +/* SPDX-License-Identifier: GPL-2.0 */
    > +/*
    > + * USBSS device controller driver.
    > + * Trace support header file.
    > + *
    > + * Copyright (C) 2018 Cadence.
    > + *
    > + * Author: Pawel Laszczak <pawell@cadence.com>
    > + */
    > +
    > +#undef TRACE_SYSTEM
    > +#define TRACE_SYSTEM cdns3
    > +
    > +#if !defined(__LINUX_CDNS3_TRACE) || defined(TRACE_HEADER_MULTI_READ)
    > +#define __LINUX_CDNS3_TRACE
    > +
    > +#include <linux/types.h>
    > +#include <linux/tracepoint.h>
    > +#include <asm/byteorder.h>
    > +#include <linux/usb/ch9.h>
    > +#include "core.h"
    > +#include "gadget.h"
    > +#include "debug.h"
    > +
    > +#define CDNS3_MSG_MAX 500
    > +
    > +DECLARE_EVENT_CLASS(cdns3_log_doorbell,
    > + TP_PROTO(const char *ep_name, u32 ep_trbaddr),
    > + TP_ARGS(ep_name, ep_trbaddr),
    > + TP_STRUCT__entry(
    > + __string(name, ep_name)
    > + __field(u32, ep_trbaddr)
    > + ),
    > + TP_fast_assign(
    > + __assign_str(name, ep_name);
    > + __entry->ep_trbaddr = ep_trbaddr;
    > + ),
    > + TP_printk("//Ding Dong %s, ep_trbaddr %08x", __get_str(name),
    > + __entry->ep_trbaddr)
    > +);
    > +
    > +DEFINE_EVENT(cdns3_log_doorbell, cdns3_doorbell_ep0,
    > + TP_PROTO(const char *ep_name, u32 ep_trbaddr),
    > + TP_ARGS(ep_name, ep_trbaddr)
    > +);
    > +
    > +DEFINE_EVENT(cdns3_log_doorbell, cdns3_doorbell_epx,
    > + TP_PROTO(const char *ep_name, u32 ep_trbaddr),
    > + TP_ARGS(ep_name, ep_trbaddr)
    > +);
    > +
    > +DECLARE_EVENT_CLASS(cdns3_log_usb_irq,
    > + TP_PROTO(struct cdns3_device *priv_dev, u32 usb_ists),
    > + TP_ARGS(priv_dev, usb_ists),
    > + TP_STRUCT__entry(
    > + __field(enum usb_device_speed, speed)
    > + __field(u32, usb_ists)
    > + __dynamic_array(char, str, CDNS3_MSG_MAX)
    > + ),
    > + TP_fast_assign(
    > + __entry->speed = cdns3_get_speed(priv_dev);
    > + __entry->usb_ists = usb_ists;
    > + ),
    > + TP_printk("%s", cdns3_decode_usb_irq(__get_str(str), __entry->speed,
    > + __entry->usb_ists))
    > +);
    > +
    > +DEFINE_EVENT(cdns3_log_usb_irq, cdns3_usb_irq,
    > + TP_PROTO(struct cdns3_device *priv_dev, u32 usb_ists),
    > + TP_ARGS(priv_dev, usb_ists)
    > +);
    > +
    > +DECLARE_EVENT_CLASS(cdns3_log_epx_irq,
    > + TP_PROTO(struct cdns3_device *priv_dev, struct cdns3_endpoint *priv_ep),
    > + TP_ARGS(priv_dev, priv_ep),
    > + TP_STRUCT__entry(
    > + __string(ep_name, priv_ep->name)
    > + __field(u32, ep_sts)
    > + __field(u32, ep_traddr)
    > + __dynamic_array(char, str, CDNS3_MSG_MAX)
    > + ),
    > + TP_fast_assign(
    > + __assign_str(ep_name, priv_ep->name);
    > + __entry->ep_sts = readl(&priv_dev->regs->ep_sts);
    > + __entry->ep_traddr = readl(&priv_dev->regs->ep_traddr);
    > + ),
    > + TP_printk("%s, ep_traddr: %08x",
    > + cdns3_decode_epx_irq(__get_str(str),
    > + __get_str(ep_name),
    > + __entry->ep_sts),
    > + __entry->ep_traddr)
    > +);
    > +
    > +DEFINE_EVENT(cdns3_log_epx_irq, cdns3_epx_irq,
    > + TP_PROTO(struct cdns3_device *priv_dev, struct cdns3_endpoint *priv_ep),
    > + TP_ARGS(priv_dev, priv_ep)
    > +);
    > +
    > +DECLARE_EVENT_CLASS(cdns3_log_ep0_irq,
    > + TP_PROTO(struct cdns3_device *priv_dev, u32 ep_sts),
    > + TP_ARGS(priv_dev, ep_sts),
    > + TP_STRUCT__entry(
    > + __field(int, ep_dir)
    > + __field(u32, ep_sts)
    > + __dynamic_array(char, str, CDNS3_MSG_MAX)
    > + ),
    > + TP_fast_assign(
    > + __entry->ep_dir = priv_dev->ep0_data_dir;
    > + __entry->ep_sts = ep_sts;
    > + ),
    > + TP_printk("%s", cdns3_decode_ep0_irq(__get_str(str),
    > + __entry->ep_dir,
    > + __entry->ep_sts))
    > +);
    > +
    > +DEFINE_EVENT(cdns3_log_ep0_irq, cdns3_ep0_irq,
    > + TP_PROTO(struct cdns3_device *priv_dev, u32 ep_sts),
    > + TP_ARGS(priv_dev, ep_sts)
    > +);
    > +
    > +DECLARE_EVENT_CLASS(cdns3_log_ctrl,
    > + TP_PROTO(struct usb_ctrlrequest *ctrl),
    > + TP_ARGS(ctrl),
    > + TP_STRUCT__entry(
    > + __field(u8, bRequestType)
    > + __field(u8, bRequest)
    > + __field(u16, wValue)
    > + __field(u16, wIndex)
    > + __field(u16, wLength)
    > + __dynamic_array(char, str, CDNS3_MSG_MAX)
    > + ),
    > + TP_fast_assign(
    > + __entry->bRequestType = ctrl->bRequestType;
    > + __entry->bRequest = ctrl->bRequest;
    > + __entry->wValue = le16_to_cpu(ctrl->wValue);
    > + __entry->wIndex = le16_to_cpu(ctrl->wIndex);
    > + __entry->wLength = le16_to_cpu(ctrl->wLength);
    > + ),
    > + TP_printk("%s", usb_decode_ctrl(__get_str(str), __entry->bRequestType,
    > + __entry->bRequest, __entry->wValue,
    > + __entry->wIndex, __entry->wLength)
    > + )
    > +);
    > +
    > +DEFINE_EVENT(cdns3_log_ctrl, cdns3_ctrl_req,
    > + TP_PROTO(struct usb_ctrlrequest *ctrl),
    > + TP_ARGS(ctrl)
    > +);
    > +
    > +DECLARE_EVENT_CLASS(cdns3_log_request,
    > + TP_PROTO(struct cdns3_request *req),
    > + TP_ARGS(req),
    > + TP_STRUCT__entry(
    > + __string(name, req->priv_ep->name)
    > + __field(struct cdns3_request *, req)
    > + __field(unsigned int, actual)
    > + __field(unsigned int, length)
    > + __field(int, status)
    > + __field(int, zero)
    > + __field(int, short_not_ok)
    > + __field(int, no_interrupt)
    > + __field(int, start_trb)
    > + __field(int, end_trb)
    > + __field(struct cdns3_trb *, start_trb_addr)
    > + __field(int, flags)
    > + ),
    > + TP_fast_assign(
    > + __assign_str(name, req->priv_ep->name);
    > + __entry->req = req;
    > + __entry->actual = req->request.actual;
    > + __entry->length = req->request.length;
    > + __entry->status = req->request.status;
    > + __entry->zero = req->request.zero;
    > + __entry->short_not_ok = req->request.short_not_ok;
    > + __entry->no_interrupt = req->request.no_interrupt;
    > + __entry->start_trb = req->start_trb;
    > + __entry->end_trb = req->end_trb;
    > + __entry->start_trb_addr = req->trb;
    > + __entry->flags = req->flags;
    > + ),
    > + TP_printk("%s: req: %p, length: %u/%u %s%s%s, status: %d,"
    > + " trb: [start:%d, end:%d: virt addr %pa], flags:%x ",
    > + __get_str(name), __entry->req, __entry->actual, __entry->length,
    > + __entry->zero ? "zero | " : "",
    > + __entry->short_not_ok ? "short | " : "",
    > + __entry->no_interrupt ? "no int" : "",
    > + __entry->status,
    > + __entry->start_trb,
    > + __entry->end_trb,
    > + __entry->start_trb_addr,
    > + __entry->flags
    > + )
    > +);
    > +
    > +DEFINE_EVENT(cdns3_log_request, cdns3_alloc_request,
    > + TP_PROTO(struct cdns3_request *req),
    > + TP_ARGS(req)
    > +);
    > +
    > +DEFINE_EVENT(cdns3_log_request, cdns3_free_request,
    > + TP_PROTO(struct cdns3_request *req),
    > + TP_ARGS(req)
    > +);
    > +
    > +DEFINE_EVENT(cdns3_log_request, cdns3_ep_queue,
    > + TP_PROTO(struct cdns3_request *req),
    > + TP_ARGS(req)
    > +);
    > +
    > +DEFINE_EVENT(cdns3_log_request, cdns3_ep_dequeue,
    > + TP_PROTO(struct cdns3_request *req),
    > + TP_ARGS(req)
    > +);
    > +
    > +DEFINE_EVENT(cdns3_log_request, cdns3_gadget_giveback,
    > + TP_PROTO(struct cdns3_request *req),
    > + TP_ARGS(req)
    > +);
    > +
    > +DECLARE_EVENT_CLASS(cdns3_log_trb,
    > + TP_PROTO(struct cdns3_endpoint *priv_ep, struct cdns3_trb *trb),
    > + TP_ARGS(priv_ep, trb),
    > + TP_STRUCT__entry(
    > + __string(name, priv_ep->name)
    > + __field(struct cdns3_trb *, trb)
    > + __field(u32, buffer)
    > + __field(u32, length)
    > + __field(u32, control)
    > + __field(u32, type)
    > + ),
    > + TP_fast_assign(
    > + __assign_str(name, priv_ep->name);
    > + __entry->trb = trb;
    > + __entry->buffer = trb->buffer;
    > + __entry->length = trb->length;
    > + __entry->control = trb->control;
    > + __entry->type = usb_endpoint_type(priv_ep->endpoint.desc);
    > + ),
    > + TP_printk("%s: trb 0x%pa, dma buf: 0x%08x, size: %ld, ctrl: 0x%08x (%s%s%s%s%s%s%s)",
    > + __get_str(name), __entry->trb, __entry->buffer,
    > + TRB_LEN(__entry->length), __entry->control,
    > + __entry->control & TRB_CYCLE ? "C=1, " : "C=0, ",
    > + __entry->control & TRB_TOGGLE ? "T=1, " : "T=0, ",
    > + __entry->control & TRB_ISP ? "ISP, " : "",
    > + __entry->control & TRB_FIFO_MODE ? "FIFO, " : "",
    > + __entry->control & TRB_CHAIN ? "CHAIN, " : "",
    > + __entry->control & TRB_IOC ? "IOC, " : "",
    > + TRB_FIELD_TO_TYPE(__entry->control) == TRB_NORMAL ? "Normal" : "LINK"
    > + )
    > +);
    > +
    > +DEFINE_EVENT(cdns3_log_trb, cdns3_prepare_trb,
    > + TP_PROTO(struct cdns3_endpoint *priv_ep, struct cdns3_trb *trb),
    > + TP_ARGS(priv_ep, trb)
    > +);
    > +
    > +DEFINE_EVENT(cdns3_log_trb, cdns3_complete_trb,
    > + TP_PROTO(struct cdns3_endpoint *priv_ep, struct cdns3_trb *trb),
    > + TP_ARGS(priv_ep, trb)
    > +);
    > +
    > +DECLARE_EVENT_CLASS(cdns3_log_ring,
    > + TP_PROTO(struct cdns3_endpoint *priv_ep),
    > + TP_ARGS(priv_ep),
    > + TP_STRUCT__entry(
    > + __dynamic_array(u8, ring, TRB_RING_SIZE)
    > + __dynamic_array(u8, priv_ep, sizeof(struct cdns3_endpoint))
    > + __dynamic_array(char, buffer,
    > + (TRBS_PER_SEGMENT * 65) + CDNS3_MSG_MAX)
    > + ),
    > + TP_fast_assign(
    > + memcpy(__get_dynamic_array(priv_ep), priv_ep,
    > + sizeof(struct cdns3_endpoint));
    > + memcpy(__get_dynamic_array(ring), priv_ep->trb_pool,
    > + TRB_RING_SIZE);
    > + ),
    > +
    > + TP_printk("%s",
    > + cdns3_dbg_ring((struct cdns3_endpoint *)__get_str(priv_ep),
    > + (struct cdns3_trb *)__get_str(ring),
    > + __get_str(buffer)))
    > +);
    > +
    > +DEFINE_EVENT(cdns3_log_ring, cdns3_ring,
    > + TP_PROTO(struct cdns3_endpoint *priv_ep),
    > + TP_ARGS(priv_ep)
    > +);
    > +
    > +DECLARE_EVENT_CLASS(cdns3_log_ep,
    > + TP_PROTO(struct cdns3_endpoint *priv_ep),
    > + TP_ARGS(priv_ep),
    > + TP_STRUCT__entry(
    > + __string(name, priv_ep->name)
    > + __field(unsigned int, maxpacket)
    > + __field(unsigned int, maxpacket_limit)
    > + __field(unsigned int, max_streams)
    > + __field(unsigned int, maxburst)
    > + __field(unsigned int, flags)
    > + __field(unsigned int, dir)
    > + __field(u8, enqueue)
    > + __field(u8, dequeue)
    > + ),
    > + TP_fast_assign(
    > + __assign_str(name, priv_ep->name);
    > + __entry->maxpacket = priv_ep->endpoint.maxpacket;
    > + __entry->maxpacket_limit = priv_ep->endpoint.maxpacket_limit;
    > + __entry->max_streams = priv_ep->endpoint.max_streams;
    > + __entry->maxburst = priv_ep->endpoint.maxburst;
    > + __entry->flags = priv_ep->flags;
    > + __entry->dir = priv_ep->dir;
    > + __entry->enqueue = priv_ep->enqueue;
    > + __entry->dequeue = priv_ep->dequeue;
    > + ),
    > + TP_printk("%s: mps: %d/%d. streams: %d, burst: %d, enq idx: %d, "
    > + "deq idx: %d, flags %s%s%s%s%s%s%s%s, dir: %s",
    > + __get_str(name), __entry->maxpacket,
    > + __entry->maxpacket_limit, __entry->max_streams,
    > + __entry->maxburst, __entry->enqueue,
    > + __entry->dequeue,
    > + __entry->flags & EP_ENABLED ? "EN | " : "",
    > + __entry->flags & EP_STALL ? "STALL | " : "",
    > + __entry->flags & EP_WEDGE ? "WEDGE | " : "",
    > + __entry->flags & EP_TRANSFER_STARTED ? "STARTED | " : "",
    > + __entry->flags & EP_UPDATE_EP_TRBADDR ? "UPD TRB | " : "",
    > + __entry->flags & EP_PENDING_REQUEST ? "REQ PEN | " : "",
    > + __entry->flags & EP_RING_FULL ? "RING FULL |" : "",
    > + __entry->flags & EP_CLAIMED ? "CLAIMED " : "",
    > + __entry->dir ? "IN" : "OUT"
    > + )
    > +);
    > +
    > +DEFINE_EVENT(cdns3_log_ep, cdns3_gadget_ep_enable,
    > + TP_PROTO(struct cdns3_endpoint *priv_ep),
    > + TP_ARGS(priv_ep)
    > +);
    > +
    > +DEFINE_EVENT(cdns3_log_ep, cdns3_gadget_ep_disable,
    > + TP_PROTO(struct cdns3_endpoint *priv_ep),
    > + TP_ARGS(priv_ep)
    > +);
    > +
    > +DECLARE_EVENT_CLASS(cdns3_log_request_handled,
    > + TP_PROTO(struct cdns3_request *priv_req, int current_index,
    > + int handled),
    > + TP_ARGS(priv_req, current_index, handled),
    > + TP_STRUCT__entry(
    > + __field(struct cdns3_request *, priv_req)
    > + __field(unsigned int, dma_position)
    > + __field(unsigned int, handled)
    > + __field(unsigned int, dequeue_idx)
    > + __field(unsigned int, enqueue_idx)
    > + __field(unsigned int, start_trb)
    > + __field(unsigned int, end_trb)
    > + ),
    > + TP_fast_assign(
    > + __entry->priv_req = priv_req;
    > + __entry->dma_position = current_index;
    > + __entry->handled = handled;
    > + __entry->dequeue_idx = priv_req->priv_ep->dequeue;
    > + __entry->enqueue_idx = priv_req->priv_ep->enqueue;
    > + __entry->start_trb = priv_req->start_trb;
    > + __entry->end_trb = priv_req->end_trb;
    > + ),
    > + TP_printk("Req: %p %s, DMA pos: %d, ep deq: %d, ep enq: %d,"
    > + " start trb: %d, end trb: %d",
    > + __entry->priv_req,
    > + __entry->handled ? "handled" : "not handled",
    > + __entry->dma_position, __entry->dequeue_idx,
    > + __entry->enqueue_idx, __entry->start_trb,
    > + __entry->end_trb
    > + )
    > +);
    > +
    > +DEFINE_EVENT(cdns3_log_request_handled, cdns3_request_handled,
    > + TP_PROTO(struct cdns3_request *priv_req, int current_index,
    > + int handled),
    > + TP_ARGS(priv_req, current_index, handled)
    > +);
    > +#endif /* __LINUX_CDNS3_TRACE */
    > +
    > +/* this part must be outside header guard */
    > +
    > +#undef TRACE_INCLUDE_PATH
    > +#define TRACE_INCLUDE_PATH .
    > +
    > +#undef TRACE_INCLUDE_FILE
    > +#define TRACE_INCLUDE_FILE trace
    > +
    > +#include <trace/define_trace.h>
    > --
    > 2.17.1
    >

    \
     
     \ /
      Last update: 2018-12-24 10:40    [W:7.192 / U:0.100 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site