lkml.org 
[lkml]   [2018]   [Dec]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: A weird problem of Realtek r8168 after resume from S3
From
Date
On 17.12.2018 14:25, Chris Chiu wrote:
> On Fri, Dec 14, 2018 at 3:37 PM Heiner Kallweit <hkallweit1@gmail.com> wrote:
>>
>> On 14.12.2018 04:33, Chris Chiu wrote:
>>> On Thu, Dec 13, 2018 at 10:20 AM Chris Chiu <chiu@endlessm.com> wrote:
>>>>
>>>> Hi,
>>>> We got an acer laptop which has a problem with ethernet networking after
>>>> resuming from S3. The ethernet is popular realtek r8168. The lspci shows as
>>>> follows.
>>>> 02:00.1 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
>>>> RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 12)
>>>>
>> Helpful would be a "dmesg | grep r8169", especially chip name + XID.
>>
> [ 22.362774] r8169 0000:02:00.1 (unnamed net_device)
> (uninitialized): mac_version = 0x2b
> [ 22.365580] libphy: r8169: probed
> [ 22.365958] r8169 0000:02:00.1 eth0: RTL8411, 00:e0:b8:1f:cb:83,
> XID 5c800800, IRQ 38
> [ 22.365961] r8169 0000:02:00.1 eth0: jumbo features [frames: 9200
> bytes, tx checksumming: ko]
>
>>>> The problem is the ethernet is not accessible after resume. Pinging via
>>>> ethernet always shows the response `Destination Host Unreachable`. However,
>>>> the interesting part is, when I run tcpdump to monitor the problematic ethernet
>>>> interface, the networking is back to alive. But it's dead again after
>>>> I stop tcpdump.
>>>> One more thing, if I ping the problematic machine from others, it achieves the
>>>> same effect as above tcpdump. Maybe it's about the register setting for RX path?
>>>>
>> You could compare the register dumps (ethtool -d) before and after S3 sleep
>> to find out whether there's a difference.
>>
>
> Actually, I just found I lead the wrong direction. The S3 suspend does
> help to reproduce,
> but it's not necessary. All I need to do is ping around 5 mins and the
> network connection
> fails. And I also find one thing interesting, disabling the MSI-X
> interrupt like commit
> [d49c88d7677ba737e9d2759a87db0402d5ab2607] can fix this problem.
> Although I don't
> understand the root cause. Anything I can do to help?
>
One more thing: I checked the vendor driver and it uses a different sequence
to initialize the ePHY. Could you please check whether the following patch
makes a difference? I don't have much hope but it's worth a try.

diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c
index 8462553e3..7cfb22e05 100644
--- a/drivers/net/ethernet/realtek/r8169.c
+++ b/drivers/net/ethernet/realtek/r8169.c
@@ -5097,11 +5097,16 @@ static void rtl_hw_start_8168g_2(struct rtl8169_private *tp)
static void rtl_hw_start_8411_2(struct rtl8169_private *tp)
{
static const struct ephy_info e_info_8411_2[] = {
- { 0x00, 0x0000, 0x0008 },
- { 0x0c, 0x3df0, 0x0200 },
- { 0x0f, 0xffff, 0x5200 },
- { 0x19, 0x0020, 0x0000 },
- { 0x1e, 0x0000, 0x2000 }
+ { 0x00, 0x0008, 0x0000 },
+ { 0x0c, 0x37d0, 0x0820 },
+ { 0x1e, 0x0000, 0x0001 },
+ { 0x19, 0x8021, 0x0000 },
+ { 0x1e, 0x0000, 0x2000 },
+ { 0x0d, 0x0100, 0x0200 },
+ { 0x00, 0x0000, 0x0080 },
+ { 0x06, 0x0000, 0x0010 },
+ { 0x04, 0x0000, 0x0010 },
+ { 0x1d, 0x0000, 0x4000 },
};

rtl_hw_start_8168g(tp);
--
2.20.0

>>>> I tried the latest 4.20 rc version but the problem still there. I
>>>> also tried some
>>>> hw_reset or init thing in the resume path but no effect. Any
>>>> suggestion for this?
>>>> Thanks
>>>>
>> Did previous kernel versions work? If it's a regression, a bisect would be
>> appreciated, because with the chip versions I've got I can't reproduce the issue.
>>
>>>> Chris
>>>
>>> Gentle ping. Any additional information required?
>>>
>>> Chris
>>>
>> Heiner
>

\
 
 \ /
  Last update: 2018-12-17 22:46    [W:0.077 / U:0.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site