Messages in this thread Patch in this message | | | From | <> | Subject | [PATCH v7 5/6] pwm: add documentation for pwm push-pull mode | Date | Mon, 17 Dec 2018 14:13:53 +0000 |
| |
From: Claudiu Beznea <claudiu.beznea@microchip.com>
Add documentation for PWM push-pull mode.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> ---
Hi Rob, In prevous version I had your Reviewed-by tag on this patch but I removed it in this version since there are some changes b/w the previous one and this one. Please see bellow and let me know if you are ok with this.
Thank you, Claudiu Beznea
Changes in v6: - remove bindings part - use 1/3 duty factor ratio - use '^' symbols to emphasize the beginning of a new period - use PWMx_y to refrer to output y of PWM x
Documentation/pwm.txt | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)
diff --git a/Documentation/pwm.txt b/Documentation/pwm.txt index 669fd4c9cc8e..80552627627d 100644 --- a/Documentation/pwm.txt +++ b/Documentation/pwm.txt @@ -130,6 +130,22 @@ channel that was exported. The following properties will then be available: PWMx_1 |__| |__| |__| |__| ^ ^ ^ ^ + Push-pull mode - for PWM channels with two outputs; output waveforms + for a PWM channel in push-pull mode, with normal polarity looks like + this: + __ __ + PWMx_0 __| |____________| |__________ + __ __ + PWMx_1 __________| |____________| |__ + ^ ^ ^ ^ + + If polarity is inversed: + __ ____________ __________ + PWMx_0 |__| |__| + __________ ____________ __ + PWMx_1 |__| |__| + ^ ^ ^ ^ + Where '^' specifies the beginning of a period. Implementing a PWM driver -- 2.7.4
| |