lkml.org 
[lkml]   [2018]   [Dec]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [driver-core PATCH v8 2/9] driver core: Establish order of operations for device_add and device_del via bitflag
From
Date
On Mon, 2018-12-10 at 13:23 -0800, Dan Williams wrote:
> On Mon, Dec 10, 2018 at 1:15 PM Dan Williams <dan.j.williams@intel.com> wrote:
> >
> > On Mon, Dec 10, 2018 at 12:58 PM Alexander Duyck
> > <alexander.h.duyck@linux.intel.com> wrote:
>
> [..]
> > > Also the context for the two functions seems to be a bit different. In
> > > the case of __device_attach_driver the device_lock is already held. In
> > > __driver_attach the lock on the device isn't taken until after a match
> > > has been found.
> >
> > Yes, I was only pattern matching when looking at the context of where
> > dev->dead is checked in __driver_attach() and wondering why it was
> > checked outside of __device_attach_driver()
>
> ...and now I realize the bigger point of your concern, we need to
> check dev->dead after acquiring the device_lock otherwise the race is
> back. We can defer that consolidation, but the larger concern of
> making it internal to __device_attach_driver() still stands.

I'm still not a fan of moving it into __device_attach_driver. I would
much rather pull out the dev->driver check and instead place that in
__device_attach_async_helper.

The __device_attach function as I said took the device_lock and had
already checked dev->driver. So in the non-async path it shouldn't be
possible for dev->driver to ever be set anyway. In addition
__device_attach_driver is called once for each driver on a given bus,
so dropping the test should reduce driver load time since it is one
less test that has to be performed per driver.

\
 
 \ /
  Last update: 2018-12-10 23:24    [W:0.044 / U:0.136 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site