lkml.org 
[lkml]   [2018]   [Dec]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: use generic DMA mapping code in powerpc V4
On Sat, 8 Dec 2018 at 17:17, Christoph Hellwig <hch@lst.de> wrote:
>
> On Sun, Dec 02, 2018 at 05:11:02PM +1100, Benjamin Herrenschmidt wrote:
> > Talking of which ... Christoph, not sure if we can do something about
> > this at the DMA API level or keep hacks but some adapters such as the
> > nVidia GPUs have a HW hack we can use to work around their limitations
> > in that case.
> >
> > They have a register that can program a fixed value for the top bits
> > that they don't support.
> >
> > This works fine for any linear mapping with an offset, provided they
> > can program the offset in that register and they have enough DMA range
> > to cover all memory from that offset.
> >
> > I can probably get the info about this from them so we can exploit it
> > in nouveau.
>
> I think we can expose the direct mapping offset if people care enough,
> we just have to be very careful designing the API. I'll happily leave
> that to those that actually want to use it, but I'll gladly help
> reviewing it.

Hi, Christoph and Ben,

It just came to my mind (and this is most likely a stupid question,
but still)… Is there any possibility of these changes having an
(positive) effect on the long-standing problem of Power Mac machines
with AGP graphics cards (which have to be limited to PCI transfers,
otherwise they'll hang, due to coherence issues)? If so, I have a G4
machine where I'd gladly test them.

Thanks,

Rui

\
 
 \ /
  Last update: 2018-12-10 18:05    [W:0.055 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site