lkml.org 
[lkml]   [2018]   [Oct]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/2] dt-bindings: clock: add description of 74aup1g157gw
Date

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

74aup1g157gw needs i0 and i1 pin as input, select and output it by
sel gpio pin. This patch adds description for 74aup1g157gw as clock
multiplexer.
"nxp,74aup1g157gw-clk" will select most closest input as output,
"nxp,74aup1g157gw-audio-clk" will select 48kHz/44.1kHz categorized
input as output.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
---
.../devicetree/bindings/clock/nxp,74aup1g157gw.txt | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
create mode 100644 Documentation/devicetree/bindings/clock/nxp,74aup1g157gw.txt

diff --git a/Documentation/devicetree/bindings/clock/nxp,74aup1g157gw.txt b/Documentation/devicetree/bindings/clock/nxp,74aup1g157gw.txt
new file mode 100644
index 0000000..d07bc04
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/nxp,74aup1g157gw.txt
@@ -0,0 +1,19 @@
+NXP 74AUP1G157GW Low-power 2-input multiplexer for clock
+
+Required properties:
+- compatible: "nxp,74aup1g157gw-clk" (select closest input as output)
+ "nxp,74aup1g157gw-audio-clk (select 48kHz / 44.1kHz as output)
+- clocks: select input clock as i0, i1
+- clock-names: "i0" and "i1"
+- sel-gpios: selector pin
+
+Examples:
+
+ clk {
+ #clock-cells = <0>;
+ compatible = "nxp,74aup1g157gw-audio-clk";
+ clocks = <&clk8snd>, <&clksnd>;
+ clock-names = "i0", "i1";
+ sel-gpios = <&gpio_exp_75 13 GPIO_ACTIVE_HIGH>;
+ };
+
--
2.7.4
\
 
 \ /
  Last update: 2018-10-10 04:17    [W:0.133 / U:0.464 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site