lkml.org 
[lkml]   [2018]   [Jan]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
SubjectRe: [PATCH v2] PM / runtime: Rework pm_runtime_force_suspend/resume()
On 3 January 2018 at 12:06, Rafael J. Wysocki <rjw@rjwysocki.net> wrote:
> From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
>
> One of the limitations of pm_runtime_force_suspend/resume() is that
> if a parent driver wants to use these functions, all of its child
> drivers have to do that too because of the parent usage counter
> manipulations necessary to get the correct state of the parent during
> system-wide transitions to the working state (system resume).

I understand your point, however this isn't describing the full story,
because there are a some more alternatives when
pm_runtime_force_suspend|resume() works well, when used for parent
devices. Let me clarify, just to make sure we get this correct.

1) If the child device isn't managed by runtime PM at all (it always
has runtime PM disabled), pm_runtime_force_suspend|resume() can be
used for the parent device. This works because the runtime PM status
if the child remains in the default status, RPM_SUSPENDED.

2) If, somehow, during system suspend/resume, the driver for the child
make sure to synchronize the runtime PM status of the child device,
according to the state of the HW, this should work too.

I leave it to you how to take this fact into consideration, if and how
to update the changelog.

> However, that limitation turns out to be artificial, so remove it.

Agree!

>
> Namely, pm_runtime_force_suspend() only needs to update the children
> counter of its parent (if there's is a parent) when the device can
> stay in suspend after the subsequent system resume transition, as
> that counter is correct already otherwise. Now, if the parent's
> children counter is not updated, it is not necessary to increment
> the parent's usage counter in that case any more, as long as the
> children counters of devices are checked along with their usage
> counters in order to decide whether or not the devices may be left
> in suspend after the subsequent system resume transition.
>
> Accordingly, modify pm_runtime_force_suspend() to only call
> pm_runtime_set_suspended() for devices whose usage and children
> counters are at the "no references" level (the runtime PM status
> of the device needs to be updated to "suspended" anyway in case
> this function is called once again for the same device during the
> transition under way), drop the parent usage counter incrementation
> from it and update pm_runtime_force_resume() to compensate for these
> changes.
>
> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> ---
> drivers/base/power/runtime.c | 74 +++++++++++++++++++------------------------
> 1 file changed, 34 insertions(+), 40 deletions(-)
>
> Index: linux-pm/drivers/base/power/runtime.c
> ===================================================================
> --- linux-pm.orig/drivers/base/power/runtime.c
> +++ linux-pm/drivers/base/power/runtime.c
> @@ -1613,17 +1613,28 @@ void pm_runtime_drop_link(struct device
> spin_unlock_irq(&dev->power.lock);
> }
>
> +static bool pm_runtime_need_not_resume(struct device *dev)
> +{
> + return atomic_read(&dev->power.usage_count) <= 1 &&
> + atomic_read(&dev->power.child_count) == 0;

We should take into account the ignore_children flag here, I think.
Something like this:

return atomic_read(&dev->power.usage_count) <= 1 &&
(atomic_read(&dev->power.child_count) == 0 ||
dev->power.ignore_children)

> +}
> +
> /**
> * pm_runtime_force_suspend - Force a device into suspend state if needed.
> * @dev: Device to suspend.
> *
> * Disable runtime PM so we safely can check the device's runtime PM status and
> - * if it is active, invoke it's .runtime_suspend callback to bring it into
> - * suspend state. Keep runtime PM disabled to preserve the state unless we
> - * encounter errors.
> + * if it is active, invoke its ->runtime_suspend callback to suspend it and
> + * change its runtime PM status field to RPM_SUSPENDED. Also, if the device's
> + * usage and children counters don't indicate that the device was in use before
> + * the system-wide transition under way, decrement its parent's children counter
> + * (if there is a parent). Keep runtime PM disabled to preserve the state
> + * unless we encounter errors.
> *
> * Typically this function may be invoked from a system suspend callback to make
> - * sure the device is put into low power state.
> + * sure the device is put into low power state and it should only be used during
> + * system-wide PM transitions to sleep states. It assumes that the analogous
> + * pm_runtime_force_resume() will be used to resume the device.
> */
> int pm_runtime_force_suspend(struct device *dev)
> {
> @@ -1646,17 +1657,18 @@ int pm_runtime_force_suspend(struct devi
> goto err;
>
> /*
> - * Increase the runtime PM usage count for the device's parent, in case
> - * when we find the device being used when system suspend was invoked.
> - * This informs pm_runtime_force_resume() to resume the parent
> - * immediately, which is needed to be able to resume its children,
> - * when not deferring the resume to be managed via runtime PM.
> + * If the device can stay in suspend after the system-wide transition
> + * to the working state that will follow, drop the children counter of
> + * its parent, but set its status to RPM_SUSPENDED anyway in case this
> + * function will be called again for it in the meantime.
> */
> - if (dev->parent && atomic_read(&dev->power.usage_count) > 1)
> - pm_runtime_get_noresume(dev->parent);
> + if (pm_runtime_need_not_resume(dev))
> + pm_runtime_set_suspended(dev);
> + else
> + __update_runtime_status(dev, RPM_SUSPENDED);
>

This is clever!

I recall when working on commit 1d9174fbc55e ("PM / Runtime: Defer
resuming of the device in pm_runtime_force_resume()"), that I wanted
to take into account the dev->power.child_count, but couldn't figure
out exactly how. :-)

> - pm_runtime_set_suspended(dev);
> return 0;
> +
> err:
> pm_runtime_enable(dev);
> return ret;
> @@ -1669,13 +1681,9 @@ EXPORT_SYMBOL_GPL(pm_runtime_force_suspe
> *
> * Prior invoking this function we expect the user to have brought the device
> * into low power state by a call to pm_runtime_force_suspend(). Here we reverse
> - * those actions and brings the device into full power, if it is expected to be
> - * used on system resume. To distinguish that, we check whether the runtime PM
> - * usage count is greater than 1 (the PM core increases the usage count in the
> - * system PM prepare phase), as that indicates a real user (such as a subsystem,
> - * driver, userspace, etc.) is using it. If that is the case, the device is
> - * expected to be used on system resume as well, so then we resume it. In the
> - * other case, we defer the resume to be managed via runtime PM.
> + * those actions and bring the device into full power, if it is expected to be
> + * used on system resume. In the other case, we defer the resume to be managed
> + * via runtime PM.
> *
> * Typically this function may be invoked from a system resume callback.
> */
> @@ -1684,32 +1692,18 @@ int pm_runtime_force_resume(struct devic
> int (*callback)(struct device *);
> int ret = 0;
>
> - callback = RPM_GET_CALLBACK(dev, runtime_resume);
> -
> - if (!callback) {
> - ret = -ENOSYS;
> - goto out;
> - }

This make me realize that, I think this is probably for legacy reasons.

I think we should allow the callback to be NULL, don't you think? Of
course, this deserves its own change.

> -
> - if (!pm_runtime_status_suspended(dev))
> + if (!pm_runtime_status_suspended(dev) || pm_runtime_need_not_resume(dev))
> goto out;
>
> /*
> - * Decrease the parent's runtime PM usage count, if we increased it
> - * during system suspend in pm_runtime_force_suspend().
> - */
> - if (atomic_read(&dev->power.usage_count) > 1) {
> - if (dev->parent)
> - pm_runtime_put_noidle(dev->parent);
> - } else {
> - goto out;
> - }
> + * The value of the parent's children counter is correct already, so
> + * just update the status of the device.
> + */
> + __update_runtime_status(dev, RPM_ACTIVE);
>
> - ret = pm_runtime_set_active(dev);
> - if (ret)
> - goto out;
> + callback = RPM_GET_CALLBACK(dev, runtime_resume);
>
> - ret = callback(dev);
> + ret = callback ? callback(dev) : -ENOSYS;
> if (ret) {
> pm_runtime_set_suspended(dev);
> goto out;
>

Thanks for looking into this!

Kind regards
Uffe

\
 
 \ /
  Last update: 2018-01-14 23:18    [W:0.142 / U:2.132 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site