lkml.org 
[lkml]   [2018]   [Jan]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 6/7] PM: i2c-designware-platdrv: Optimize power management
From
Date
On 01/03/2018 02:37 AM, Rafael J. Wysocki wrote:
> From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
>
> Optimize the power management in i2c-designware-platdrv by making it
> set the DPM_FLAG_SMART_SUSPEND and DPM_FLAG_LEAVE_SUSPENDED which
> allows some code to be dropped from its PM callbacks.
>
> First, setting DPM_FLAG_SMART_SUSPEND causes the intel-lpss driver
> to avoid resuming i2c-designware-platdrv devices in its ->prepare
> callback, so they can stay in runtime suspend after that point even
> if the direct-complete feature is not used for them.
>
> It also causes the ACPI PM domain and the PM core to avoid invoking
> "late" and "noirq" suspend callbacks for these devices if they are
> in runtime suspend at the beginning of the "late" phase of device
> suspend during system suspend. That guarantees dw_i2c_plat_suspend()
> to be called for a device only if it is not in runtime suspend.
>
> Moreover, it causes the device's runtime PM status to be set to
> "active" after calling dw_i2c_plat_resume() for it, so the
> driver doesn't need internal flags to avoid invoking either
> dw_i2c_plat_suspend() or dw_i2c_plat_resume() twice in a row.
>
> Second, setting DPM_FLAG_LEAVE_SUSPENDED enables the optimization
> allowing the device to stay suspended after system resume under
> suitable conditions, so again the driver doesn't need to take
> care of that by itself.
>
> Accordingly, the internal "suspended" and "skip_resume" flags
> used by the driver are not necessary any more, so drop them and
> simplify the driver's PM callbacks.
>
> Additionally, notice that dw_i2c_plat_complete() only needs to
> schedule runtime PM resume for the device if platform firmware
> has been involved in resuming the system, so make it call
> pm_resume_via_firmware() to check that. Also make it check the
> runtime PM status of the device instead of its direct_complete
> flag which also works if the device remained suspended due to
> the DPM_FLAG_LEAVE_SUSPENDED driver flag.
>
> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> ---
> drivers/i2c/busses/i2c-designware-core.h | 2 -
> drivers/i2c/busses/i2c-designware-platdrv.c | 31 ++++++++++------------------
> 2 files changed, 12 insertions(+), 21 deletions(-)
>
This doesn't apply to linux-next due 0326f9f801b2 ("i2c: designware:
rename i2c_dw_plat_prepare_clk to i2c_dw_prepare_clk"). It was trivial
to fix which I did locally for testing.

Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>

\
 
 \ /
  Last update: 2018-01-14 23:17    [W:0.100 / U:0.588 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site