lkml.org 
[lkml]   [2018]   [Jan]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH V3 2/2] cpufreq: imx6q: add 696MHz operating point for i.mx6ul
On 08-01-18, 10:04, Anson Huang wrote:
> Add 696MHz operating point for i.MX6UL, only for those
> parts with speed grading fuse set to 2b'10 supports
> 696MHz operating point, so, speed grading check is also
> added for i.MX6UL in this patch, the clock tree for each
> operating point are as below:
>
> 696MHz:
> pll1 696000000
> pll1_bypass 696000000
> pll1_sys 696000000
> pll1_sw 696000000
> arm 696000000
> 528MHz:
> pll2 528000000
> pll2_bypass 528000000
> pll2_bus 528000000
> ca7_secondary_sel 528000000
> step 528000000
> pll1_sw 528000000
> arm 528000000
> 396MHz:
> pll2_pfd2_396m 396000000
> ca7_secondary_sel 396000000
> step 396000000
> pll1_sw 396000000
> arm 396000000
> 198MHz:
> pll2_pfd2_396m 396000000
> ca7_secondary_sel 396000000
> step 396000000
> pll1_sw 396000000
> arm 198000000
>
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
> ---
> changes since v2:
> add reviewed-by.
> drivers/cpufreq/imx6q-cpufreq.c | 46 ++++++++++++++++++++++++++++++++++++++++-
> 1 file changed, 45 insertions(+), 1 deletion(-)

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>

--
viresh

\
 
 \ /
  Last update: 2018-01-14 23:16    [W:0.069 / U:0.184 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site