Messages in this thread | | | Subject | Re: [PATCH] tools: fix cross-compile var export | From | Martin Kelly <> | Date | Sun, 7 Jan 2018 10:51:21 -0800 |
| |
On 01/07/2018 10:31 AM, Martin Kelly wrote: > On 01/07/2018 08:11 AM, Paul Gortmaker wrote: >> [[PATCH] tools: fix cross-compile var export] On 06/01/2018 (Sat >> 12:16) Martin Kelly wrote: >> >>> From: Martin Kelly <martin@martingkelly.com> >>> >>> Currently in a number of Makefiles, we clobber the CC, LD, and/or >>> STRIP env vars >>> when cross-compiling, which breaks any additional flags that might be >>> set (such >>> as sysroot). This easily shows up by using, for instance, a Yocto SDK. >>> >>> Fix this by more carefully overriding the flags in the way that the perf >>> Makefile does. >>> >>> This patch does not fix cross-compile for all the tools (some have >>> other bugs), >>> but it does appear to fix it for these: >>> >>> - cgroup >>> - freefall >>> - gpio >>> - hv >>> - iio >>> - leds >>> - spi >>> - vm >>> - wmi >>> >>> Signed-off-by: Martin Kelly <martin@martingkelly.com> >>> --- >>> This patch touches multiple subsystems, and there doesn't appear to >>> be a global >>> tools maintainer, so I sent this to linux-embedded kernel-janitors, and >>> linux-kbuild. Please let me know if there is a better place for it. >> >> I think you will have better luck if you go subsystem by subsystem, e.g. >> send gpio change to gpio maintainer, usb change to usb maintainer and so >> on. In addition, you'll want to try and understand/explain why those >> lines were added in the 1st place and how it won't break other existing >> use cases by removing them. Maybe "git blame" will help for that... >> >> P. >> -- >> > > I can send patches subsystem-by-subsystem, but this patch fixes a single > bug that applies to many Makefiles. It fixes it by putting the correct > logic into tools/scripts/Makefile.include, which each Makefiles > includes. If I do this subsystem-by-subsystem, we will just duplicate > these lines into every Makefile: > > +$(call allow-override,CC,$(CROSS_COMPILE)gcc) > +$(call allow-override,AR,$(CROSS_COMPILE)ar) > +$(call allow-override,LD,$(CROSS_COMPILE)ld) > +$(call allow-override,CXX,$(CROSS_COMPILE)g++) > +$(call allow-override,CXX,$(CROSS_COMPILE)strip) > > We could do this, but it's a lot of code duplication and means that > anyone making a new Makefile must also copy the lines or their Makefile > will have this bug. Since the bug fix generically applies everywhere, I > think it's most correct for it to go into the common Makefile. > > If there is really no maintainer for the tools/scripts/Makefile.include > file, then maybe I have to send subsystem-by-subsystem, but that seems > less than ideal. > > I do understand why the CC = $(CROSS_COMPILE)gcc lines exist; it is to > enable cross-compile when you set the $CROSS_COMPILE env var and to use > native gcc when that is not set. The bug is that if you already have $CC > set to your cross-compiler (which is what the Yocto SDK and other > toolchains do), then most of your command-line gets clobbered. Here's an > example from an ARM Yocto SDK I have: > > $ echo $CC > arm-poky-linux-gnueabi-gcc -march=armv7-a -mfpu=neon -mfloat-abi=hard > -mcpu=cortex-a8 > --sysroot=/home/martin/src/poky/build/sdk/sysroots/cortexa8hf-neon-poky-linux-gnueabi > > > $ echo $CROSS_COMPILE > arm-poky-linux-gnueabi- > > $ echo ${CROSS_COMPILE}gcc > arm-poky-linux-gnueabi-gcc > > Although arm-poky-linux-gnueabi-gcc is a cross-compiler, we've lost many > build flags, notably --sysroot, which enables us to find the right > libraries to link against. Without this change, I get this kind of error > in all the affected Makefiles: > > martin@cascade:~/src/linux/tools$ make iio > [snip] > iio_event_monitor.c:18:10: fatal error: unistd.h: No such file or directory > #include <unistd.h> > ^~~~~~~~~~ > > This occurs because unistd.h is in the sysroot, but we've dropped the > --sysroot flag: > $ find /home/martin/src/poky/build/sdk/sysroots -path > '*/usr/include/unistd.h' > /home/martin/src/poky/build/sdk/sysroots/cortexa8hf-neon-poky-linux-gnueabi/usr/include/unistd.h > > > With the change, we add do CC = $(CROSS_COMPILE)gcc if and only if CC is > not already set. I'm happy to add all these details to the commit > description. >
Urg, I accidentally sent to kernel-kbuild instead of linux-kbuild, changed now. It appears that past changes to tools/scripts/Makefile.include have been handled by linux-kbuild and often Masahiro Yamada.
Perhaps the best sequence here is to send a patch to kbuild adding the call-override function and calls to it to the main common Makefile. Then I can send individual subsystem patches dropping the individual CC = lines and similar. It will be 13 patches instead of 1 but will eventually result in the same thing.
Paul, any thoughts?
>>> >>> tools/cgroup/Makefile | 1 - >>> tools/gpio/Makefile | 2 -- >>> tools/hv/Makefile | 1 - >>> tools/iio/Makefile | 2 -- >>> tools/laptop/freefall/Makefile | 1 - >>> tools/leds/Makefile | 1 - >>> tools/perf/Makefile.perf | 6 ------ >>> tools/power/acpi/Makefile.config | 3 --- >>> tools/scripts/Makefile.include | 18 ++++++++++++++++++ >>> tools/spi/Makefile | 2 -- >>> tools/usb/Makefile | 1 - >>> tools/vm/Makefile | 1 - >>> tools/wmi/Makefile | 1 - >>> 13 files changed, 18 insertions(+), 22 deletions(-) >>> >>> diff --git a/tools/cgroup/Makefile b/tools/cgroup/Makefile >>> index 860fa151640a..ffca068e4a76 100644 >>> --- a/tools/cgroup/Makefile >>> +++ b/tools/cgroup/Makefile >>> @@ -1,7 +1,6 @@ >>> # SPDX-License-Identifier: GPL-2.0 >>> # Makefile for cgroup tools >>> -CC = $(CROSS_COMPILE)gcc >>> CFLAGS = -Wall -Wextra >>> all: cgroup_event_listener >>> diff --git a/tools/gpio/Makefile b/tools/gpio/Makefile >>> index 805a2c0cf4cd..240eda014b37 100644 >>> --- a/tools/gpio/Makefile >>> +++ b/tools/gpio/Makefile >>> @@ -12,8 +12,6 @@ endif >>> # (this improves performance and avoids hard-to-debug behaviour); >>> MAKEFLAGS += -r >>> -CC = $(CROSS_COMPILE)gcc >>> -LD = $(CROSS_COMPILE)ld >>> CFLAGS += -O2 -Wall -g -D_GNU_SOURCE -I$(OUTPUT)include >>> ALL_TARGETS := lsgpio gpio-hammer gpio-event-mon >>> diff --git a/tools/hv/Makefile b/tools/hv/Makefile >>> index 31503819454d..68c2d7b059b3 100644 >>> --- a/tools/hv/Makefile >>> +++ b/tools/hv/Makefile >>> @@ -1,7 +1,6 @@ >>> # SPDX-License-Identifier: GPL-2.0 >>> # Makefile for Hyper-V tools >>> -CC = $(CROSS_COMPILE)gcc >>> WARNINGS = -Wall -Wextra >>> CFLAGS = $(WARNINGS) -g $(shell getconf LFS_CFLAGS) >>> diff --git a/tools/iio/Makefile b/tools/iio/Makefile >>> index a08e7a47d6a3..332ed2f6c2c2 100644 >>> --- a/tools/iio/Makefile >>> +++ b/tools/iio/Makefile >>> @@ -12,8 +12,6 @@ endif >>> # (this improves performance and avoids hard-to-debug behaviour); >>> MAKEFLAGS += -r >>> -CC = $(CROSS_COMPILE)gcc >>> -LD = $(CROSS_COMPILE)ld >>> CFLAGS += -O2 -Wall -g -D_GNU_SOURCE -I$(OUTPUT)include >>> ALL_TARGETS := iio_event_monitor lsiio iio_generic_buffer >>> diff --git a/tools/laptop/freefall/Makefile >>> b/tools/laptop/freefall/Makefile >>> index 5f758c489a20..b572d94255f6 100644 >>> --- a/tools/laptop/freefall/Makefile >>> +++ b/tools/laptop/freefall/Makefile >>> @@ -2,7 +2,6 @@ >>> PREFIX ?= /usr >>> SBINDIR ?= sbin >>> INSTALL ?= install >>> -CC = $(CROSS_COMPILE)gcc >>> TARGET = freefall >>> diff --git a/tools/leds/Makefile b/tools/leds/Makefile >>> index c379af003807..7b6bed13daaa 100644 >>> --- a/tools/leds/Makefile >>> +++ b/tools/leds/Makefile >>> @@ -1,7 +1,6 @@ >>> # SPDX-License-Identifier: GPL-2.0 >>> # Makefile for LEDs tools >>> -CC = $(CROSS_COMPILE)gcc >>> CFLAGS = -Wall -Wextra -g -I../../include/uapi >>> all: uledmon led_hw_brightness_mon >>> diff --git a/tools/perf/Makefile.perf b/tools/perf/Makefile.perf >>> index 68cf1360a3f3..3035ce5f6b36 100644 >>> --- a/tools/perf/Makefile.perf >>> +++ b/tools/perf/Makefile.perf >>> @@ -144,12 +144,6 @@ define allow-override >>> $(eval $(1) = $(2))) >>> endef >>> -# Allow setting CC and AR and LD, or setting CROSS_COMPILE as a prefix. >>> -$(call allow-override,CC,$(CROSS_COMPILE)gcc) >>> -$(call allow-override,AR,$(CROSS_COMPILE)ar) >>> -$(call allow-override,LD,$(CROSS_COMPILE)ld) >>> -$(call allow-override,CXX,$(CROSS_COMPILE)g++) >>> - >>> LD += $(EXTRA_LDFLAGS) >>> HOSTCC ?= gcc >>> diff --git a/tools/power/acpi/Makefile.config >>> b/tools/power/acpi/Makefile.config >>> index a1883bbb0144..2cccbba64418 100644 >>> --- a/tools/power/acpi/Makefile.config >>> +++ b/tools/power/acpi/Makefile.config >>> @@ -56,9 +56,6 @@ INSTALL_SCRIPT = ${INSTALL_PROGRAM} >>> # to compile vs uClibc, that can be done here as well. >>> CROSS = #/usr/i386-linux-uclibc/usr/bin/i386-uclibc- >>> CROSS_COMPILE ?= $(CROSS) >>> -CC = $(CROSS_COMPILE)gcc >>> -LD = $(CROSS_COMPILE)gcc >>> -STRIP = $(CROSS_COMPILE)strip >>> HOSTCC = gcc >>> # check if compiler option is supported >>> diff --git a/tools/scripts/Makefile.include >>> b/tools/scripts/Makefile.include >>> index 3fab179b1aba..09b2d0f07f66 100644 >>> --- a/tools/scripts/Makefile.include >>> +++ b/tools/scripts/Makefile.include >>> @@ -42,6 +42,24 @@ EXTRA_WARNINGS += -Wformat >>> CC_NO_CLANG := $(shell $(CC) -dM -E -x c /dev/null | grep -Fq >>> "__clang__"; echo $$?) >>> +# Makefiles suck: This macro sets a default value of $(2) for the >>> +# variable named by $(1), unless the variable has been set by >>> +# environment or command line. This is necessary for CC and AR >>> +# because make sets default values, so the simpler ?= approach >>> +# won't work as expected. >>> +define allow-override >>> + $(if $(or $(findstring environment,$(origin $(1))),\ >>> + $(findstring command line,$(origin $(1)))),,\ >>> + $(eval $(1) = $(2))) >>> +endef >>> + >>> +# Allow setting various cross-compile vars or setting CROSS_COMPILE >>> as a prefix. >>> +$(call allow-override,CC,$(CROSS_COMPILE)gcc) >>> +$(call allow-override,AR,$(CROSS_COMPILE)ar) >>> +$(call allow-override,LD,$(CROSS_COMPILE)ld) >>> +$(call allow-override,CXX,$(CROSS_COMPILE)g++) >>> +$(call allow-override,CXX,$(CROSS_COMPILE)strip) >>> + >>> ifeq ($(CC_NO_CLANG), 1) >>> EXTRA_WARNINGS += -Wstrict-aliasing=3 >>> endif >>> diff --git a/tools/spi/Makefile b/tools/spi/Makefile >>> index 90615e10c79a..815d15589177 100644 >>> --- a/tools/spi/Makefile >>> +++ b/tools/spi/Makefile >>> @@ -11,8 +11,6 @@ endif >>> # (this improves performance and avoids hard-to-debug behaviour); >>> MAKEFLAGS += -r >>> -CC = $(CROSS_COMPILE)gcc >>> -LD = $(CROSS_COMPILE)ld >>> CFLAGS += -O2 -Wall -g -D_GNU_SOURCE -I$(OUTPUT)include >>> ALL_TARGETS := spidev_test spidev_fdx >>> diff --git a/tools/usb/Makefile b/tools/usb/Makefile >>> index 4e6506078494..01d758d73b6d 100644 >>> --- a/tools/usb/Makefile >>> +++ b/tools/usb/Makefile >>> @@ -1,7 +1,6 @@ >>> # SPDX-License-Identifier: GPL-2.0 >>> # Makefile for USB tools >>> -CC = $(CROSS_COMPILE)gcc >>> PTHREAD_LIBS = -lpthread >>> WARNINGS = -Wall -Wextra >>> CFLAGS = $(WARNINGS) -g -I../include >>> diff --git a/tools/vm/Makefile b/tools/vm/Makefile >>> index be320b905ea7..20f6cf04377f 100644 >>> --- a/tools/vm/Makefile >>> +++ b/tools/vm/Makefile >>> @@ -6,7 +6,6 @@ TARGETS=page-types slabinfo page_owner_sort >>> LIB_DIR = ../lib/api >>> LIBS = $(LIB_DIR)/libapi.a >>> -CC = $(CROSS_COMPILE)gcc >>> CFLAGS = -Wall -Wextra -I../lib/ >>> LDFLAGS = $(LIBS) >>> diff --git a/tools/wmi/Makefile b/tools/wmi/Makefile >>> index e664f1167388..e0e87239126b 100644 >>> --- a/tools/wmi/Makefile >>> +++ b/tools/wmi/Makefile >>> @@ -2,7 +2,6 @@ PREFIX ?= /usr >>> SBINDIR ?= sbin >>> INSTALL ?= install >>> CFLAGS += -D__EXPORTED_HEADERS__ -I../../include/uapi -I../../include >>> -CC = $(CROSS_COMPILE)gcc >>> TARGET = dell-smbios-example >>> -- >>> 2.11.0 >>>
| |