lkml.org 
[lkml]   [2018]   [Jan]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 2/2] cpufreq: imx6q: add 696MHz operating point for i.mx6ul
On Tue, Jan 2, 2018 at 6:07 PM, Anson Huang <Anson.Huang@nxp.com> wrote:
> Add 696MHz operating point for i.MX6UL, only for those
> parts with speed grading fuse set to 2b'10 supports
> 696MHz operating point, so, speed grading check is also
> added for i.MX6UL in this patch, the clock tree for each
> operating point are as below:
>
> 696MHz:
> pll1 696000000
> pll1_bypass 696000000
> pll1_sys 696000000
> pll1_sw 696000000
> arm 696000000
> 528MHz:
> pll2 528000000
> pll2_bypass 528000000
> pll2_bus 528000000
> ca7_secondary_sel 528000000
> step 528000000
> pll1_sw 528000000
> arm 528000000
> 396MHz:
> pll2_pfd2_396m 396000000
> ca7_secondary_sel 396000000
> step 396000000
> pll1_sw 396000000
> arm 396000000
> 198MHz:
> pll2_pfd2_396m 396000000
> ca7_secondary_sel 396000000
> step 396000000
> pll1_sw 396000000
> arm 198000000
>
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>

This doesn't apply for me and in a nontrivial way.

What kernel is it against?

> ---
> drivers/cpufreq/imx6q-cpufreq.c | 46 ++++++++++++++++++++++++++++++++++++++++-
> 1 file changed, 45 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/cpufreq/imx6q-cpufreq.c b/drivers/cpufreq/imx6q-cpufreq.c
> index d9b2c2d..cbda0cc 100644
> --- a/drivers/cpufreq/imx6q-cpufreq.c
> +++ b/drivers/cpufreq/imx6q-cpufreq.c
> @@ -120,6 +120,10 @@ static int imx6q_set_target(struct cpufreq_policy *policy, unsigned int index)
> clk_set_parent(secondary_sel_clk, pll2_pfd2_396m_clk);
> clk_set_parent(step_clk, secondary_sel_clk);
> clk_set_parent(pll1_sw_clk, step_clk);
> + if (freq_hz > clk_get_rate(pll2_bus_clk)) {
> + clk_set_rate(pll1_sys_clk, new_freq * 1000);
> + clk_set_parent(pll1_sw_clk, pll1_sys_clk);
> + }
> } else {
> clk_set_parent(step_clk, pll2_pfd2_396m_clk);
> clk_set_parent(pll1_sw_clk, step_clk);
> @@ -244,6 +248,43 @@ static void imx6q_opp_check_speed_grading(struct device *dev)
> of_node_put(np);
> }
>
> +#define OCOTP_CFG3_6UL_SPEED_696MHZ 0x2
> +
> +static void imx6ul_opp_check_speed_grading(struct device *dev)
> +{
> + struct device_node *np;
> + void __iomem *base;
> + u32 val;
> +
> + np = of_find_compatible_node(NULL, NULL, "fsl,imx6ul-ocotp");
> + if (!np)
> + return;
> +
> + base = of_iomap(np, 0);
> + if (!base) {
> + dev_err(dev, "failed to map ocotp\n");
> + goto put_node;
> + }
> +
> + /*
> + * Speed GRADING[1:0] defines the max speed of ARM:
> + * 2b'00: Reserved;
> + * 2b'01: 528000000Hz;
> + * 2b'10: 696000000Hz;
> + * 2b'11: Reserved;
> + * We need to set the max speed of ARM according to fuse map.
> + */
> + val = readl_relaxed(base + OCOTP_CFG3);
> + val >>= OCOTP_CFG3_SPEED_SHIFT;
> + val &= 0x3;
> + if (val != OCOTP_CFG3_6UL_SPEED_696MHZ)
> + if (dev_pm_opp_disable(dev, 696000000))
> + dev_warn(dev, "failed to disable 696MHz OPP\n");
> + iounmap(base);
> +put_node:
> + of_node_put(np);
> +}
> +
> static int imx6q_cpufreq_probe(struct platform_device *pdev)
> {
> struct device_node *np;
> @@ -311,7 +352,10 @@ static int imx6q_cpufreq_probe(struct platform_device *pdev)
> goto put_reg;
> }
>
> - imx6q_opp_check_speed_grading(cpu_dev);
> + if (of_machine_is_compatible("fsl,imx6ul"))
> + imx6ul_opp_check_speed_grading(cpu_dev);
> + else
> + imx6q_opp_check_speed_grading(cpu_dev);
>
> /* Because we have added the OPPs here, we must free them */
> free_opp = true;
> --
> 1.9.1
>

\
 
 \ /
  Last update: 2018-01-05 13:22    [W:0.108 / U:2.764 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site