lkml.org 
[lkml]   [2018]   [Jan]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/3] PCI: move OF related PCI functions into PCI core
Date
Following what has been done for other subsystems, move the remaining PCI
related code out of drivers/of/ and into drivers/pci/of.c

With this, we can kill a few kconfig symbols.

Cc: Frank Rowand <frowand.list@gmail.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: linux-pci@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
---
arch/arm/mach-mvebu/Kconfig | 1 -
drivers/of/Kconfig | 16 --
drivers/of/Makefile | 2 -
drivers/of/address.c | 8 +-
drivers/of/of_pci.c | 384 ---------------------------------
drivers/of/of_pci_irq.c | 131 ------------
drivers/pci/of.c | 506 ++++++++++++++++++++++++++++++++++++++++++++
include/linux/of_pci.h | 2 +-
8 files changed, 510 insertions(+), 540 deletions(-)
delete mode 100644 drivers/of/of_pci.c
delete mode 100644 drivers/of/of_pci_irq.c

diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig
index 9b49867154bf..6b32dc527edc 100644
--- a/arch/arm/mach-mvebu/Kconfig
+++ b/arch/arm/mach-mvebu/Kconfig
@@ -10,7 +10,6 @@ menuconfig ARCH_MVEBU
select ZONE_DMA if ARM_LPAE
select GPIOLIB
select PCI_QUIRKS if PCI
- select OF_ADDRESS_PCI

if ARCH_MVEBU

diff --git a/drivers/of/Kconfig b/drivers/of/Kconfig
index 5020d7ef7494..35b5b8ec13c9 100644
--- a/drivers/of/Kconfig
+++ b/drivers/of/Kconfig
@@ -63,10 +63,6 @@ config OF_DYNAMIC
config OF_ADDRESS
def_bool y
depends on !SPARC && (HAS_IOMEM || UML)
- select OF_ADDRESS_PCI if PCI
-
-config OF_ADDRESS_PCI
- bool

config OF_IRQ
def_bool y
@@ -83,18 +79,6 @@ config OF_MDIO
help
OpenFirmware MDIO bus (Ethernet PHY) accessors

-config OF_PCI
- def_tristate PCI
- depends on PCI
- help
- OpenFirmware PCI bus accessors
-
-config OF_PCI_IRQ
- def_tristate PCI
- depends on OF_PCI && OF_IRQ
- help
- OpenFirmware PCI IRQ routing helpers
-
config OF_RESERVED_MEM
depends on OF_EARLY_FLATTREE
bool
diff --git a/drivers/of/Makefile b/drivers/of/Makefile
index 63a4be62ce19..663a4af0cccd 100644
--- a/drivers/of/Makefile
+++ b/drivers/of/Makefile
@@ -10,8 +10,6 @@ obj-$(CONFIG_OF_IRQ) += irq.o
obj-$(CONFIG_OF_NET) += of_net.o
obj-$(CONFIG_OF_UNITTEST) += unittest.o
obj-$(CONFIG_OF_MDIO) += of_mdio.o
-obj-$(CONFIG_OF_PCI) += of_pci.o
-obj-$(CONFIG_OF_PCI_IRQ) += of_pci_irq.o
obj-$(CONFIG_OF_RESERVED_MEM) += of_reserved_mem.o
obj-$(CONFIG_OF_RESOLVE) += resolver.o
obj-$(CONFIG_OF_OVERLAY) += overlay.o
diff --git a/drivers/of/address.c b/drivers/of/address.c
index fa6cabfc3cb9..8591afbdfe99 100644
--- a/drivers/of/address.c
+++ b/drivers/of/address.c
@@ -96,7 +96,7 @@ static unsigned int of_bus_default_get_flags(const __be32 *addr)
return IORESOURCE_MEM;
}

-#ifdef CONFIG_OF_ADDRESS_PCI
+#ifdef CONFIG_PCI
/*
* PCI bus specific translator
*/
@@ -171,9 +171,7 @@ static int of_bus_pci_translate(__be32 *addr, u64 offset, int na)
{
return of_bus_default_translate(addr + 1, offset, na - 1);
}
-#endif /* CONFIG_OF_ADDRESS_PCI */

-#ifdef CONFIG_PCI
const __be32 *of_get_pci_address(struct device_node *dev, int bar_no, u64 *size,
unsigned int *flags)
{
@@ -426,7 +424,7 @@ static unsigned int of_bus_isa_get_flags(const __be32 *addr)
*/

static struct of_bus of_busses[] = {
-#ifdef CONFIG_OF_ADDRESS_PCI
+#ifdef CONFIG_PCI
/* PCI */
{
.name = "pci",
@@ -437,7 +435,7 @@ static struct of_bus of_busses[] = {
.translate = of_bus_pci_translate,
.get_flags = of_bus_pci_get_flags,
},
-#endif /* CONFIG_OF_ADDRESS_PCI */
+#endif /* CONFIG_PCI */
/* ISA */
{
.name = "isa",
diff --git a/drivers/of/of_pci.c b/drivers/of/of_pci.c
deleted file mode 100644
index a7b1cb6c2f65..000000000000
--- a/drivers/of/of_pci.c
+++ /dev/null
@@ -1,384 +0,0 @@
-#define pr_fmt(fmt) "OF: PCI: " fmt
-
-#include <linux/kernel.h>
-#include <linux/export.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_device.h>
-#include <linux/of_pci.h>
-#include <linux/slab.h>
-
-static inline int __of_pci_pci_compare(struct device_node *node,
- unsigned int data)
-{
- int devfn;
-
- devfn = of_pci_get_devfn(node);
- if (devfn < 0)
- return 0;
-
- return devfn == data;
-}
-
-struct device_node *of_pci_find_child_device(struct device_node *parent,
- unsigned int devfn)
-{
- struct device_node *node, *node2;
-
- for_each_child_of_node(parent, node) {
- if (__of_pci_pci_compare(node, devfn))
- return node;
- /*
- * Some OFs create a parent node "multifunc-device" as
- * a fake root for all functions of a multi-function
- * device we go down them as well.
- */
- if (!strcmp(node->name, "multifunc-device")) {
- for_each_child_of_node(node, node2) {
- if (__of_pci_pci_compare(node2, devfn)) {
- of_node_put(node);
- return node2;
- }
- }
- }
- }
- return NULL;
-}
-EXPORT_SYMBOL_GPL(of_pci_find_child_device);
-
-/**
- * of_pci_get_devfn() - Get device and function numbers for a device node
- * @np: device node
- *
- * Parses a standard 5-cell PCI resource and returns an 8-bit value that can
- * be passed to the PCI_SLOT() and PCI_FUNC() macros to extract the device
- * and function numbers respectively. On error a negative error code is
- * returned.
- */
-int of_pci_get_devfn(struct device_node *np)
-{
- u32 reg[5];
- int error;
-
- error = of_property_read_u32_array(np, "reg", reg, ARRAY_SIZE(reg));
- if (error)
- return error;
-
- return (reg[0] >> 8) & 0xff;
-}
-EXPORT_SYMBOL_GPL(of_pci_get_devfn);
-
-/**
- * of_pci_parse_bus_range() - parse the bus-range property of a PCI device
- * @node: device node
- * @res: address to a struct resource to return the bus-range
- *
- * Returns 0 on success or a negative error-code on failure.
- */
-int of_pci_parse_bus_range(struct device_node *node, struct resource *res)
-{
- u32 bus_range[2];
- int error;
-
- error = of_property_read_u32_array(node, "bus-range", bus_range,
- ARRAY_SIZE(bus_range));
- if (error)
- return error;
-
- res->name = node->name;
- res->start = bus_range[0];
- res->end = bus_range[1];
- res->flags = IORESOURCE_BUS;
-
- return 0;
-}
-EXPORT_SYMBOL_GPL(of_pci_parse_bus_range);
-
-/**
- * This function will try to obtain the host bridge domain number by
- * finding a property called "linux,pci-domain" of the given device node.
- *
- * @node: device tree node with the domain information
- *
- * Returns the associated domain number from DT in the range [0-0xffff], or
- * a negative value if the required property is not found.
- */
-int of_get_pci_domain_nr(struct device_node *node)
-{
- u32 domain;
- int error;
-
- error = of_property_read_u32(node, "linux,pci-domain", &domain);
- if (error)
- return error;
-
- return (u16)domain;
-}
-EXPORT_SYMBOL_GPL(of_get_pci_domain_nr);
-
-/**
- * This function will try to find the limitation of link speed by finding
- * a property called "max-link-speed" of the given device node.
- *
- * @node: device tree node with the max link speed information
- *
- * Returns the associated max link speed from DT, or a negative value if the
- * required property is not found or is invalid.
- */
-int of_pci_get_max_link_speed(struct device_node *node)
-{
- u32 max_link_speed;
-
- if (of_property_read_u32(node, "max-link-speed", &max_link_speed) ||
- max_link_speed > 4)
- return -EINVAL;
-
- return max_link_speed;
-}
-EXPORT_SYMBOL_GPL(of_pci_get_max_link_speed);
-
-/**
- * of_pci_check_probe_only - Setup probe only mode if linux,pci-probe-only
- * is present and valid
- */
-void of_pci_check_probe_only(void)
-{
- u32 val;
- int ret;
-
- ret = of_property_read_u32(of_chosen, "linux,pci-probe-only", &val);
- if (ret) {
- if (ret == -ENODATA || ret == -EOVERFLOW)
- pr_warn("linux,pci-probe-only without valid value, ignoring\n");
- return;
- }
-
- if (val)
- pci_add_flags(PCI_PROBE_ONLY);
- else
- pci_clear_flags(PCI_PROBE_ONLY);
-
- pr_info("PROBE_ONLY %sabled\n", val ? "en" : "dis");
-}
-EXPORT_SYMBOL_GPL(of_pci_check_probe_only);
-
-#if defined(CONFIG_OF_ADDRESS)
-/**
- * of_pci_get_host_bridge_resources - Parse PCI host bridge resources from DT
- * @dev: device node of the host bridge having the range property
- * @busno: bus number associated with the bridge root bus
- * @bus_max: maximum number of buses for this bridge
- * @resources: list where the range of resources will be added after DT parsing
- * @io_base: pointer to a variable that will contain on return the physical
- * address for the start of the I/O range. Can be NULL if the caller doesn't
- * expect IO ranges to be present in the device tree.
- *
- * It is the caller's job to free the @resources list.
- *
- * This function will parse the "ranges" property of a PCI host bridge device
- * node and setup the resource mapping based on its content. It is expected
- * that the property conforms with the Power ePAPR document.
- *
- * It returns zero if the range parsing has been successful or a standard error
- * value if it failed.
- */
-int of_pci_get_host_bridge_resources(struct device_node *dev,
- unsigned char busno, unsigned char bus_max,
- struct list_head *resources, resource_size_t *io_base)
-{
- struct resource_entry *window;
- struct resource *res;
- struct resource *bus_range;
- struct of_pci_range range;
- struct of_pci_range_parser parser;
- char range_type[4];
- int err;
-
- if (io_base)
- *io_base = (resource_size_t)OF_BAD_ADDR;
-
- bus_range = kzalloc(sizeof(*bus_range), GFP_KERNEL);
- if (!bus_range)
- return -ENOMEM;
-
- pr_info("host bridge %pOF ranges:\n", dev);
-
- err = of_pci_parse_bus_range(dev, bus_range);
- if (err) {
- bus_range->start = busno;
- bus_range->end = bus_max;
- bus_range->flags = IORESOURCE_BUS;
- pr_info(" No bus range found for %pOF, using %pR\n",
- dev, bus_range);
- } else {
- if (bus_range->end > bus_range->start + bus_max)
- bus_range->end = bus_range->start + bus_max;
- }
- pci_add_resource(resources, bus_range);
-
- /* Check for ranges property */
- err = of_pci_range_parser_init(&parser, dev);
- if (err)
- goto parse_failed;
-
- pr_debug("Parsing ranges property...\n");
- for_each_of_pci_range(&parser, &range) {
- /* Read next ranges element */
- if ((range.flags & IORESOURCE_TYPE_BITS) == IORESOURCE_IO)
- snprintf(range_type, 4, " IO");
- else if ((range.flags & IORESOURCE_TYPE_BITS) == IORESOURCE_MEM)
- snprintf(range_type, 4, "MEM");
- else
- snprintf(range_type, 4, "err");
- pr_info(" %s %#010llx..%#010llx -> %#010llx\n", range_type,
- range.cpu_addr, range.cpu_addr + range.size - 1,
- range.pci_addr);
-
- /*
- * If we failed translation or got a zero-sized region
- * then skip this range
- */
- if (range.cpu_addr == OF_BAD_ADDR || range.size == 0)
- continue;
-
- res = kzalloc(sizeof(struct resource), GFP_KERNEL);
- if (!res) {
- err = -ENOMEM;
- goto parse_failed;
- }
-
- err = of_pci_range_to_resource(&range, dev, res);
- if (err) {
- kfree(res);
- continue;
- }
-
- if (resource_type(res) == IORESOURCE_IO) {
- if (!io_base) {
- pr_err("I/O range found for %pOF. Please provide an io_base pointer to save CPU base address\n",
- dev);
- err = -EINVAL;
- goto conversion_failed;
- }
- if (*io_base != (resource_size_t)OF_BAD_ADDR)
- pr_warn("More than one I/O resource converted for %pOF. CPU base address for old range lost!\n",
- dev);
- *io_base = range.cpu_addr;
- }
-
- pci_add_resource_offset(resources, res, res->start - range.pci_addr);
- }
-
- return 0;
-
-conversion_failed:
- kfree(res);
-parse_failed:
- resource_list_for_each_entry(window, resources)
- kfree(window->res);
- pci_free_resource_list(resources);
- return err;
-}
-EXPORT_SYMBOL_GPL(of_pci_get_host_bridge_resources);
-#endif /* CONFIG_OF_ADDRESS */
-
-/**
- * of_pci_map_rid - Translate a requester ID through a downstream mapping.
- * @np: root complex device node.
- * @rid: PCI requester ID to map.
- * @map_name: property name of the map to use.
- * @map_mask_name: optional property name of the mask to use.
- * @target: optional pointer to a target device node.
- * @id_out: optional pointer to receive the translated ID.
- *
- * Given a PCI requester ID, look up the appropriate implementation-defined
- * platform ID and/or the target device which receives transactions on that
- * ID, as per the "iommu-map" and "msi-map" bindings. Either of @target or
- * @id_out may be NULL if only the other is required. If @target points to
- * a non-NULL device node pointer, only entries targeting that node will be
- * matched; if it points to a NULL value, it will receive the device node of
- * the first matching target phandle, with a reference held.
- *
- * Return: 0 on success or a standard error code on failure.
- */
-int of_pci_map_rid(struct device_node *np, u32 rid,
- const char *map_name, const char *map_mask_name,
- struct device_node **target, u32 *id_out)
-{
- u32 map_mask, masked_rid;
- int map_len;
- const __be32 *map = NULL;
-
- if (!np || !map_name || (!target && !id_out))
- return -EINVAL;
-
- map = of_get_property(np, map_name, &map_len);
- if (!map) {
- if (target)
- return -ENODEV;
- /* Otherwise, no map implies no translation */
- *id_out = rid;
- return 0;
- }
-
- if (!map_len || map_len % (4 * sizeof(*map))) {
- pr_err("%pOF: Error: Bad %s length: %d\n", np,
- map_name, map_len);
- return -EINVAL;
- }
-
- /* The default is to select all bits. */
- map_mask = 0xffffffff;
-
- /*
- * Can be overridden by "{iommu,msi}-map-mask" property.
- * If of_property_read_u32() fails, the default is used.
- */
- if (map_mask_name)
- of_property_read_u32(np, map_mask_name, &map_mask);
-
- masked_rid = map_mask & rid;
- for ( ; map_len > 0; map_len -= 4 * sizeof(*map), map += 4) {
- struct device_node *phandle_node;
- u32 rid_base = be32_to_cpup(map + 0);
- u32 phandle = be32_to_cpup(map + 1);
- u32 out_base = be32_to_cpup(map + 2);
- u32 rid_len = be32_to_cpup(map + 3);
-
- if (rid_base & ~map_mask) {
- pr_err("%pOF: Invalid %s translation - %s-mask (0x%x) ignores rid-base (0x%x)\n",
- np, map_name, map_name,
- map_mask, rid_base);
- return -EFAULT;
- }
-
- if (masked_rid < rid_base || masked_rid >= rid_base + rid_len)
- continue;
-
- phandle_node = of_find_node_by_phandle(phandle);
- if (!phandle_node)
- return -ENODEV;
-
- if (target) {
- if (*target)
- of_node_put(phandle_node);
- else
- *target = phandle_node;
-
- if (*target != phandle_node)
- continue;
- }
-
- if (id_out)
- *id_out = masked_rid - rid_base + out_base;
-
- pr_debug("%pOF: %s, using mask %08x, rid-base: %08x, out-base: %08x, length: %08x, rid: %08x -> %08x\n",
- np, map_name, map_mask, rid_base, out_base,
- rid_len, rid, masked_rid - rid_base + out_base);
- return 0;
- }
-
- pr_err("%pOF: Invalid %s translation - no match for rid 0x%x on %pOF\n",
- np, map_name, rid, target && *target ? *target : NULL);
- return -EFAULT;
-}
diff --git a/drivers/of/of_pci_irq.c b/drivers/of/of_pci_irq.c
deleted file mode 100644
index 3a05568f65df..000000000000
--- a/drivers/of/of_pci_irq.c
+++ /dev/null
@@ -1,131 +0,0 @@
-#include <linux/kernel.h>
-#include <linux/of_pci.h>
-#include <linux/of_irq.h>
-#include <linux/export.h>
-
-/**
- * of_irq_parse_pci - Resolve the interrupt for a PCI device
- * @pdev: the device whose interrupt is to be resolved
- * @out_irq: structure of_irq filled by this function
- *
- * This function resolves the PCI interrupt for a given PCI device. If a
- * device-node exists for a given pci_dev, it will use normal OF tree
- * walking. If not, it will implement standard swizzling and walk up the
- * PCI tree until an device-node is found, at which point it will finish
- * resolving using the OF tree walking.
- */
-int of_irq_parse_pci(const struct pci_dev *pdev, struct of_phandle_args *out_irq)
-{
- struct device_node *dn, *ppnode;
- struct pci_dev *ppdev;
- __be32 laddr[3];
- u8 pin;
- int rc;
-
- /* Check if we have a device node, if yes, fallback to standard
- * device tree parsing
- */
- dn = pci_device_to_OF_node(pdev);
- if (dn) {
- rc = of_irq_parse_one(dn, 0, out_irq);
- if (!rc)
- return rc;
- }
-
- /* Ok, we don't, time to have fun. Let's start by building up an
- * interrupt spec. we assume #interrupt-cells is 1, which is standard
- * for PCI. If you do different, then don't use that routine.
- */
- rc = pci_read_config_byte(pdev, PCI_INTERRUPT_PIN, &pin);
- if (rc != 0)
- goto err;
- /* No pin, exit with no error message. */
- if (pin == 0)
- return -ENODEV;
-
- /* Now we walk up the PCI tree */
- for (;;) {
- /* Get the pci_dev of our parent */
- ppdev = pdev->bus->self;
-
- /* Ouch, it's a host bridge... */
- if (ppdev == NULL) {
- ppnode = pci_bus_to_OF_node(pdev->bus);
-
- /* No node for host bridge ? give up */
- if (ppnode == NULL) {
- rc = -EINVAL;
- goto err;
- }
- } else {
- /* We found a P2P bridge, check if it has a node */
- ppnode = pci_device_to_OF_node(ppdev);
- }
-
- /* Ok, we have found a parent with a device-node, hand over to
- * the OF parsing code.
- * We build a unit address from the linux device to be used for
- * resolution. Note that we use the linux bus number which may
- * not match your firmware bus numbering.
- * Fortunately, in most cases, interrupt-map-mask doesn't
- * include the bus number as part of the matching.
- * You should still be careful about that though if you intend
- * to rely on this function (you ship a firmware that doesn't
- * create device nodes for all PCI devices).
- */
- if (ppnode)
- break;
-
- /* We can only get here if we hit a P2P bridge with no node,
- * let's do standard swizzling and try again
- */
- pin = pci_swizzle_interrupt_pin(pdev, pin);
- pdev = ppdev;
- }
-
- out_irq->np = ppnode;
- out_irq->args_count = 1;
- out_irq->args[0] = pin;
- laddr[0] = cpu_to_be32((pdev->bus->number << 16) | (pdev->devfn << 8));
- laddr[1] = laddr[2] = cpu_to_be32(0);
- rc = of_irq_parse_raw(laddr, out_irq);
- if (rc)
- goto err;
- return 0;
-err:
- if (rc == -ENOENT) {
- dev_warn(&pdev->dev,
- "%s: no interrupt-map found, INTx interrupts not available\n",
- __func__);
- pr_warn_once("%s: possibly some PCI slots don't have level triggered interrupts capability\n",
- __func__);
- } else {
- dev_err(&pdev->dev, "%s: failed with rc=%d\n", __func__, rc);
- }
- return rc;
-}
-EXPORT_SYMBOL_GPL(of_irq_parse_pci);
-
-/**
- * of_irq_parse_and_map_pci() - Decode a PCI irq from the device tree and map to a virq
- * @dev: The pci device needing an irq
- * @slot: PCI slot number; passed when used as map_irq callback. Unused
- * @pin: PCI irq pin number; passed when used as map_irq callback. Unused
- *
- * @slot and @pin are unused, but included in the function so that this
- * function can be used directly as the map_irq callback to
- * pci_assign_irq() and struct pci_host_bridge.map_irq pointer
- */
-int of_irq_parse_and_map_pci(const struct pci_dev *dev, u8 slot, u8 pin)
-{
- struct of_phandle_args oirq;
- int ret;
-
- ret = of_irq_parse_pci(dev, &oirq);
- if (ret)
- return 0; /* Proper return code 0 == NO_IRQ */
-
- return irq_create_of_mapping(&oirq);
-}
-EXPORT_SYMBOL_GPL(of_irq_parse_and_map_pci);
-
diff --git a/drivers/pci/of.c b/drivers/pci/of.c
index e112da11630e..859a43dd098d 100644
--- a/drivers/pci/of.c
+++ b/drivers/pci/of.c
@@ -8,12 +8,14 @@
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
+#define pr_fmt(fmt) "PCI: OF: " fmt

#include <linux/irqdomain.h>
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/of.h>
#include <linux/of_irq.h>
+#include <linux/of_address.h>
#include <linux/of_pci.h>
#include "pci.h"

@@ -88,3 +90,507 @@ struct irq_domain *pci_host_bridge_of_msi_domain(struct pci_bus *bus)
return NULL;
#endif
}
+
+
+static inline int __of_pci_pci_compare(struct device_node *node,
+ unsigned int data)
+{
+ int devfn;
+
+ devfn = of_pci_get_devfn(node);
+ if (devfn < 0)
+ return 0;
+
+ return devfn == data;
+}
+
+struct device_node *of_pci_find_child_device(struct device_node *parent,
+ unsigned int devfn)
+{
+ struct device_node *node, *node2;
+
+ for_each_child_of_node(parent, node) {
+ if (__of_pci_pci_compare(node, devfn))
+ return node;
+ /*
+ * Some OFs create a parent node "multifunc-device" as
+ * a fake root for all functions of a multi-function
+ * device we go down them as well.
+ */
+ if (!strcmp(node->name, "multifunc-device")) {
+ for_each_child_of_node(node, node2) {
+ if (__of_pci_pci_compare(node2, devfn)) {
+ of_node_put(node);
+ return node2;
+ }
+ }
+ }
+ }
+ return NULL;
+}
+EXPORT_SYMBOL_GPL(of_pci_find_child_device);
+
+/**
+ * of_pci_get_devfn() - Get device and function numbers for a device node
+ * @np: device node
+ *
+ * Parses a standard 5-cell PCI resource and returns an 8-bit value that can
+ * be passed to the PCI_SLOT() and PCI_FUNC() macros to extract the device
+ * and function numbers respectively. On error a negative error code is
+ * returned.
+ */
+int of_pci_get_devfn(struct device_node *np)
+{
+ u32 reg[5];
+ int error;
+
+ error = of_property_read_u32_array(np, "reg", reg, ARRAY_SIZE(reg));
+ if (error)
+ return error;
+
+ return (reg[0] >> 8) & 0xff;
+}
+EXPORT_SYMBOL_GPL(of_pci_get_devfn);
+
+/**
+ * of_pci_parse_bus_range() - parse the bus-range property of a PCI device
+ * @node: device node
+ * @res: address to a struct resource to return the bus-range
+ *
+ * Returns 0 on success or a negative error-code on failure.
+ */
+int of_pci_parse_bus_range(struct device_node *node, struct resource *res)
+{
+ u32 bus_range[2];
+ int error;
+
+ error = of_property_read_u32_array(node, "bus-range", bus_range,
+ ARRAY_SIZE(bus_range));
+ if (error)
+ return error;
+
+ res->name = node->name;
+ res->start = bus_range[0];
+ res->end = bus_range[1];
+ res->flags = IORESOURCE_BUS;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(of_pci_parse_bus_range);
+
+/**
+ * This function will try to obtain the host bridge domain number by
+ * finding a property called "linux,pci-domain" of the given device node.
+ *
+ * @node: device tree node with the domain information
+ *
+ * Returns the associated domain number from DT in the range [0-0xffff], or
+ * a negative value if the required property is not found.
+ */
+int of_get_pci_domain_nr(struct device_node *node)
+{
+ u32 domain;
+ int error;
+
+ error = of_property_read_u32(node, "linux,pci-domain", &domain);
+ if (error)
+ return error;
+
+ return (u16)domain;
+}
+EXPORT_SYMBOL_GPL(of_get_pci_domain_nr);
+
+/**
+ * This function will try to find the limitation of link speed by finding
+ * a property called "max-link-speed" of the given device node.
+ *
+ * @node: device tree node with the max link speed information
+ *
+ * Returns the associated max link speed from DT, or a negative value if the
+ * required property is not found or is invalid.
+ */
+int of_pci_get_max_link_speed(struct device_node *node)
+{
+ u32 max_link_speed;
+
+ if (of_property_read_u32(node, "max-link-speed", &max_link_speed) ||
+ max_link_speed > 4)
+ return -EINVAL;
+
+ return max_link_speed;
+}
+EXPORT_SYMBOL_GPL(of_pci_get_max_link_speed);
+
+/**
+ * of_pci_check_probe_only - Setup probe only mode if linux,pci-probe-only
+ * is present and valid
+ */
+void of_pci_check_probe_only(void)
+{
+ u32 val;
+ int ret;
+
+ ret = of_property_read_u32(of_chosen, "linux,pci-probe-only", &val);
+ if (ret) {
+ if (ret == -ENODATA || ret == -EOVERFLOW)
+ pr_warn("linux,pci-probe-only without valid value, ignoring\n");
+ return;
+ }
+
+ if (val)
+ pci_add_flags(PCI_PROBE_ONLY);
+ else
+ pci_clear_flags(PCI_PROBE_ONLY);
+
+ pr_info("PROBE_ONLY %sabled\n", val ? "en" : "dis");
+}
+EXPORT_SYMBOL_GPL(of_pci_check_probe_only);
+
+#if defined(CONFIG_OF_ADDRESS)
+/**
+ * of_pci_get_host_bridge_resources - Parse PCI host bridge resources from DT
+ * @dev: device node of the host bridge having the range property
+ * @busno: bus number associated with the bridge root bus
+ * @bus_max: maximum number of buses for this bridge
+ * @resources: list where the range of resources will be added after DT parsing
+ * @io_base: pointer to a variable that will contain on return the physical
+ * address for the start of the I/O range. Can be NULL if the caller doesn't
+ * expect IO ranges to be present in the device tree.
+ *
+ * It is the caller's job to free the @resources list.
+ *
+ * This function will parse the "ranges" property of a PCI host bridge device
+ * node and setup the resource mapping based on its content. It is expected
+ * that the property conforms with the Power ePAPR document.
+ *
+ * It returns zero if the range parsing has been successful or a standard error
+ * value if it failed.
+ */
+int of_pci_get_host_bridge_resources(struct device_node *dev,
+ unsigned char busno, unsigned char bus_max,
+ struct list_head *resources, resource_size_t *io_base)
+{
+ struct resource_entry *window;
+ struct resource *res;
+ struct resource *bus_range;
+ struct of_pci_range range;
+ struct of_pci_range_parser parser;
+ char range_type[4];
+ int err;
+
+ if (io_base)
+ *io_base = (resource_size_t)OF_BAD_ADDR;
+
+ bus_range = kzalloc(sizeof(*bus_range), GFP_KERNEL);
+ if (!bus_range)
+ return -ENOMEM;
+
+ pr_info("host bridge %pOF ranges:\n", dev);
+
+ err = of_pci_parse_bus_range(dev, bus_range);
+ if (err) {
+ bus_range->start = busno;
+ bus_range->end = bus_max;
+ bus_range->flags = IORESOURCE_BUS;
+ pr_info(" No bus range found for %pOF, using %pR\n",
+ dev, bus_range);
+ } else {
+ if (bus_range->end > bus_range->start + bus_max)
+ bus_range->end = bus_range->start + bus_max;
+ }
+ pci_add_resource(resources, bus_range);
+
+ /* Check for ranges property */
+ err = of_pci_range_parser_init(&parser, dev);
+ if (err)
+ goto parse_failed;
+
+ pr_debug("Parsing ranges property...\n");
+ for_each_of_pci_range(&parser, &range) {
+ /* Read next ranges element */
+ if ((range.flags & IORESOURCE_TYPE_BITS) == IORESOURCE_IO)
+ snprintf(range_type, 4, " IO");
+ else if ((range.flags & IORESOURCE_TYPE_BITS) == IORESOURCE_MEM)
+ snprintf(range_type, 4, "MEM");
+ else
+ snprintf(range_type, 4, "err");
+ pr_info(" %s %#010llx..%#010llx -> %#010llx\n", range_type,
+ range.cpu_addr, range.cpu_addr + range.size - 1,
+ range.pci_addr);
+
+ /*
+ * If we failed translation or got a zero-sized region
+ * then skip this range
+ */
+ if (range.cpu_addr == OF_BAD_ADDR || range.size == 0)
+ continue;
+
+ res = kzalloc(sizeof(struct resource), GFP_KERNEL);
+ if (!res) {
+ err = -ENOMEM;
+ goto parse_failed;
+ }
+
+ err = of_pci_range_to_resource(&range, dev, res);
+ if (err) {
+ kfree(res);
+ continue;
+ }
+
+ if (resource_type(res) == IORESOURCE_IO) {
+ if (!io_base) {
+ pr_err("I/O range found for %pOF. Please provide an io_base pointer to save CPU base address\n",
+ dev);
+ err = -EINVAL;
+ goto conversion_failed;
+ }
+ if (*io_base != (resource_size_t)OF_BAD_ADDR)
+ pr_warn("More than one I/O resource converted for %pOF. CPU base address for old range lost!\n",
+ dev);
+ *io_base = range.cpu_addr;
+ }
+
+ pci_add_resource_offset(resources, res, res->start - range.pci_addr);
+ }
+
+ return 0;
+
+conversion_failed:
+ kfree(res);
+parse_failed:
+ resource_list_for_each_entry(window, resources)
+ kfree(window->res);
+ pci_free_resource_list(resources);
+ return err;
+}
+EXPORT_SYMBOL_GPL(of_pci_get_host_bridge_resources);
+#endif /* CONFIG_OF_ADDRESS */
+
+/**
+ * of_pci_map_rid - Translate a requester ID through a downstream mapping.
+ * @np: root complex device node.
+ * @rid: PCI requester ID to map.
+ * @map_name: property name of the map to use.
+ * @map_mask_name: optional property name of the mask to use.
+ * @target: optional pointer to a target device node.
+ * @id_out: optional pointer to receive the translated ID.
+ *
+ * Given a PCI requester ID, look up the appropriate implementation-defined
+ * platform ID and/or the target device which receives transactions on that
+ * ID, as per the "iommu-map" and "msi-map" bindings. Either of @target or
+ * @id_out may be NULL if only the other is required. If @target points to
+ * a non-NULL device node pointer, only entries targeting that node will be
+ * matched; if it points to a NULL value, it will receive the device node of
+ * the first matching target phandle, with a reference held.
+ *
+ * Return: 0 on success or a standard error code on failure.
+ */
+int of_pci_map_rid(struct device_node *np, u32 rid,
+ const char *map_name, const char *map_mask_name,
+ struct device_node **target, u32 *id_out)
+{
+ u32 map_mask, masked_rid;
+ int map_len;
+ const __be32 *map = NULL;
+
+ if (!np || !map_name || (!target && !id_out))
+ return -EINVAL;
+
+ map = of_get_property(np, map_name, &map_len);
+ if (!map) {
+ if (target)
+ return -ENODEV;
+ /* Otherwise, no map implies no translation */
+ *id_out = rid;
+ return 0;
+ }
+
+ if (!map_len || map_len % (4 * sizeof(*map))) {
+ pr_err("%pOF: Error: Bad %s length: %d\n", np,
+ map_name, map_len);
+ return -EINVAL;
+ }
+
+ /* The default is to select all bits. */
+ map_mask = 0xffffffff;
+
+ /*
+ * Can be overridden by "{iommu,msi}-map-mask" property.
+ * If of_property_read_u32() fails, the default is used.
+ */
+ if (map_mask_name)
+ of_property_read_u32(np, map_mask_name, &map_mask);
+
+ masked_rid = map_mask & rid;
+ for ( ; map_len > 0; map_len -= 4 * sizeof(*map), map += 4) {
+ struct device_node *phandle_node;
+ u32 rid_base = be32_to_cpup(map + 0);
+ u32 phandle = be32_to_cpup(map + 1);
+ u32 out_base = be32_to_cpup(map + 2);
+ u32 rid_len = be32_to_cpup(map + 3);
+
+ if (rid_base & ~map_mask) {
+ pr_err("%pOF: Invalid %s translation - %s-mask (0x%x) ignores rid-base (0x%x)\n",
+ np, map_name, map_name,
+ map_mask, rid_base);
+ return -EFAULT;
+ }
+
+ if (masked_rid < rid_base || masked_rid >= rid_base + rid_len)
+ continue;
+
+ phandle_node = of_find_node_by_phandle(phandle);
+ if (!phandle_node)
+ return -ENODEV;
+
+ if (target) {
+ if (*target)
+ of_node_put(phandle_node);
+ else
+ *target = phandle_node;
+
+ if (*target != phandle_node)
+ continue;
+ }
+
+ if (id_out)
+ *id_out = masked_rid - rid_base + out_base;
+
+ pr_debug("%pOF: %s, using mask %08x, rid-base: %08x, out-base: %08x, length: %08x, rid: %08x -> %08x\n",
+ np, map_name, map_mask, rid_base, out_base,
+ rid_len, rid, masked_rid - rid_base + out_base);
+ return 0;
+ }
+
+ pr_err("%pOF: Invalid %s translation - no match for rid 0x%x on %pOF\n",
+ np, map_name, rid, target && *target ? *target : NULL);
+ return -EFAULT;
+}
+
+#if IS_ENABLED(CONFIG_OF_IRQ)
+/**
+ * of_irq_parse_pci - Resolve the interrupt for a PCI device
+ * @pdev: the device whose interrupt is to be resolved
+ * @out_irq: structure of_irq filled by this function
+ *
+ * This function resolves the PCI interrupt for a given PCI device. If a
+ * device-node exists for a given pci_dev, it will use normal OF tree
+ * walking. If not, it will implement standard swizzling and walk up the
+ * PCI tree until an device-node is found, at which point it will finish
+ * resolving using the OF tree walking.
+ */
+int of_irq_parse_pci(const struct pci_dev *pdev, struct of_phandle_args *out_irq)
+{
+ struct device_node *dn, *ppnode;
+ struct pci_dev *ppdev;
+ __be32 laddr[3];
+ u8 pin;
+ int rc;
+
+ /* Check if we have a device node, if yes, fallback to standard
+ * device tree parsing
+ */
+ dn = pci_device_to_OF_node(pdev);
+ if (dn) {
+ rc = of_irq_parse_one(dn, 0, out_irq);
+ if (!rc)
+ return rc;
+ }
+
+ /* Ok, we don't, time to have fun. Let's start by building up an
+ * interrupt spec. we assume #interrupt-cells is 1, which is standard
+ * for PCI. If you do different, then don't use that routine.
+ */
+ rc = pci_read_config_byte(pdev, PCI_INTERRUPT_PIN, &pin);
+ if (rc != 0)
+ goto err;
+ /* No pin, exit with no error message. */
+ if (pin == 0)
+ return -ENODEV;
+
+ /* Now we walk up the PCI tree */
+ for (;;) {
+ /* Get the pci_dev of our parent */
+ ppdev = pdev->bus->self;
+
+ /* Ouch, it's a host bridge... */
+ if (ppdev == NULL) {
+ ppnode = pci_bus_to_OF_node(pdev->bus);
+
+ /* No node for host bridge ? give up */
+ if (ppnode == NULL) {
+ rc = -EINVAL;
+ goto err;
+ }
+ } else {
+ /* We found a P2P bridge, check if it has a node */
+ ppnode = pci_device_to_OF_node(ppdev);
+ }
+
+ /* Ok, we have found a parent with a device-node, hand over to
+ * the OF parsing code.
+ * We build a unit address from the linux device to be used for
+ * resolution. Note that we use the linux bus number which may
+ * not match your firmware bus numbering.
+ * Fortunately, in most cases, interrupt-map-mask doesn't
+ * include the bus number as part of the matching.
+ * You should still be careful about that though if you intend
+ * to rely on this function (you ship a firmware that doesn't
+ * create device nodes for all PCI devices).
+ */
+ if (ppnode)
+ break;
+
+ /* We can only get here if we hit a P2P bridge with no node,
+ * let's do standard swizzling and try again
+ */
+ pin = pci_swizzle_interrupt_pin(pdev, pin);
+ pdev = ppdev;
+ }
+
+ out_irq->np = ppnode;
+ out_irq->args_count = 1;
+ out_irq->args[0] = pin;
+ laddr[0] = cpu_to_be32((pdev->bus->number << 16) | (pdev->devfn << 8));
+ laddr[1] = laddr[2] = cpu_to_be32(0);
+ rc = of_irq_parse_raw(laddr, out_irq);
+ if (rc)
+ goto err;
+ return 0;
+err:
+ if (rc == -ENOENT) {
+ dev_warn(&pdev->dev,
+ "%s: no interrupt-map found, INTx interrupts not available\n",
+ __func__);
+ pr_warn_once("%s: possibly some PCI slots don't have level triggered interrupts capability\n",
+ __func__);
+ } else {
+ dev_err(&pdev->dev, "%s: failed with rc=%d\n", __func__, rc);
+ }
+ return rc;
+}
+EXPORT_SYMBOL_GPL(of_irq_parse_pci);
+
+/**
+ * of_irq_parse_and_map_pci() - Decode a PCI irq from the device tree and map to a virq
+ * @dev: The pci device needing an irq
+ * @slot: PCI slot number; passed when used as map_irq callback. Unused
+ * @pin: PCI irq pin number; passed when used as map_irq callback. Unused
+ *
+ * @slot and @pin are unused, but included in the function so that this
+ * function can be used directly as the map_irq callback to
+ * pci_assign_irq() and struct pci_host_bridge.map_irq pointer
+ */
+int of_irq_parse_and_map_pci(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+ struct of_phandle_args oirq;
+ int ret;
+
+ ret = of_irq_parse_pci(dev, &oirq);
+ if (ret)
+ return 0; /* Proper return code 0 == NO_IRQ */
+
+ return irq_create_of_mapping(&oirq);
+}
+EXPORT_SYMBOL_GPL(of_irq_parse_and_map_pci);
+#endif /* CONFIG_OF_IRQ */
diff --git a/include/linux/of_pci.h b/include/linux/of_pci.h
index bf588a05d0d0..f0e129e848ea 100644
--- a/include/linux/of_pci.h
+++ b/include/linux/of_pci.h
@@ -9,7 +9,7 @@ struct pci_dev;
struct of_phandle_args;
struct device_node;

-#ifdef CONFIG_OF_PCI
+#if IS_ENABLED(CONFIG_OF) && IS_ENABLED(CONFIG_PCI)
int of_irq_parse_pci(const struct pci_dev *pdev, struct of_phandle_args *out_irq);
struct device_node *of_pci_find_child_device(struct device_node *parent,
unsigned int devfn);
--
2.14.1
\
 
 \ /
  Last update: 2018-01-04 22:13    [W:0.151 / U:0.376 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site