lkml.org 
[lkml]   [2018]   [Jan]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 12/12] watchdog: sp5100_tco: Add support for recent FCH versions
On Thu, Jan 04, 2018 at 01:01:22PM +0100, Boszormenyi Zoltan wrote:
> 2017-12-24 22:04 keltezéssel, Guenter Roeck írta:
> >Starting with Family 16h Models 30h-3Fh and Family 15h Models 60h-6Fh,
> >watchdog address space decoding has changed. The cutover point is already
> >identified in the i2c-piix2 driver, so use the same mechanism.
>
> "i2c-piix4".
>
Thanks!

> Otherwise, I only have an older AMD FX CPU, so I can only test
> whether it is not broken there.
>

That is actually the important test. I tested myself on Ryzen 1700X.

Thanks,
Guenter

> >
> >Cc: Zoltán Böszörményi <zboszor@pr.hu>
> >Signed-off-by: Guenter Roeck <linux@roeck-us.net>
> >---
> > drivers/watchdog/sp5100_tco.c | 169 ++++++++++++++++++++++++++++--------------
> > drivers/watchdog/sp5100_tco.h | 21 ++++++
> > 2 files changed, 133 insertions(+), 57 deletions(-)
> >
> >diff --git a/drivers/watchdog/sp5100_tco.c b/drivers/watchdog/sp5100_tco.c
> >index 23246cb40598..41aaae2d5287 100644
> >--- a/drivers/watchdog/sp5100_tco.c
> >+++ b/drivers/watchdog/sp5100_tco.c
> >@@ -16,6 +16,11 @@
> > * See AMD Publication 43009 "AMD SB700/710/750 Register Reference Guide",
> > * AMD Publication 45482 "AMD SB800-Series Southbridges Register
> > * Reference Guide"
> >+ * AMD Publication 48751 "BIOS and Kernel Developer’s Guide (BKDG)
> >+ * for AMD Family 16h Models 00h-0Fh Processors"
> >+ * AMD Publication 51192 "AMD Bolton FCH Register Reference Guide"
> >+ * AMD Publication 52740 "BIOS and Kernel Developer’s Guide (BKDG)
> >+ * for AMD Family 16h Models 30h-3Fh Processors"
> > */
> > /*
> >@@ -40,9 +45,14 @@
> > /* internal variables */
> >+enum tco_reg_layout {
> >+ sp5100, sb800, efch
> >+};
> >+
> > struct sp5100_tco {
> > struct watchdog_device wdd;
> > void __iomem *tcobase;
> >+ enum tco_reg_layout tco_reg_layout;
> > };
> > /* the watchdog platform device */
> >@@ -67,10 +77,20 @@ MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started."
> > * Some TCO specific functions
> > */
> >-static bool tco_has_sp5100_reg_layout(struct pci_dev *dev)
> >+static enum tco_reg_layout tco_reg_layout(struct pci_dev *dev)
> > {
> >- return dev->device == PCI_DEVICE_ID_ATI_SBX00_SMBUS &&
> >- dev->revision < 0x40;
> >+ if (dev->vendor == PCI_VENDOR_ID_ATI &&
> >+ dev->device == PCI_DEVICE_ID_ATI_SBX00_SMBUS &&
> >+ dev->revision < 0x40) {
> >+ return sp5100;
> >+ } else if (dev->vendor == PCI_VENDOR_ID_AMD &&
> >+ ((dev->device == PCI_DEVICE_ID_AMD_HUDSON2_SMBUS &&
> >+ dev->revision >= 0x41) ||
> >+ (dev->device == PCI_DEVICE_ID_AMD_KERNCZ_SMBUS &&
> >+ dev->revision >= 0x49))) {
> >+ return efch;
> >+ }
> >+ return sb800;
> > }
> > static int tco_timer_start(struct watchdog_device *wdd)
> >@@ -139,9 +159,12 @@ static void sp5100_tco_update_pm_reg8(u8 index, u8 reset, u8 set)
> > outb(val, SP5100_IO_PM_DATA_REG);
> > }
> >-static void tco_timer_enable(void)
> >+static void tco_timer_enable(struct sp5100_tco *tco)
> > {
> >- if (!tco_has_sp5100_reg_layout(sp5100_tco_pci)) {
> >+ u32 val;
> >+
> >+ switch (tco->tco_reg_layout) {
> >+ case sb800:
> > /* For SB800 or later */
> > /* Set the Watchdog timer resolution to 1 sec */
> > sp5100_tco_update_pm_reg8(SB800_PM_WATCHDOG_CONFIG,
> >@@ -151,9 +174,8 @@ static void tco_timer_enable(void)
> > sp5100_tco_update_pm_reg8(SB800_PM_WATCHDOG_CONTROL,
> > ~SB800_PM_WATCHDOG_DISABLE,
> > SB800_PCI_WATCHDOG_DECODE_EN);
> >- } else {
> >- u32 val;
> >-
> >+ break;
> >+ case sp5100:
> > /* For SP5100 or SB7x0 */
> > /* Enable watchdog decode bit */
> > pci_read_config_dword(sp5100_tco_pci,
> >@@ -170,6 +192,13 @@ static void tco_timer_enable(void)
> > sp5100_tco_update_pm_reg8(SP5100_PM_WATCHDOG_CONTROL,
> > ~SP5100_PM_WATCHDOG_DISABLE,
> > SP5100_PM_WATCHDOG_SECOND_RES);
> >+ break;
> >+ case efch:
> >+ /* Set the Watchdog timer resolution to 1 sec and enable */
> >+ sp5100_tco_update_pm_reg8(EFCH_PM_DECODEEN3,
> >+ ~EFCH_PM_WATCHDOG_DISABLE,
> >+ EFCH_PM_DECODEEN_SECOND_RES);
> >+ break;
> > }
> > }
> >@@ -189,89 +218,113 @@ static int sp5100_tco_setupdevice(struct device *dev,
> > {
> > struct sp5100_tco *tco = watchdog_get_drvdata(wdd);
> > const char *dev_name;
> >- u8 base_addr;
> >- u32 val;
> >+ u32 mmio_addr = 0, val;
> > int ret;
> >- /*
> >- * Determine type of southbridge chipset.
> >- */
> >- if (tco_has_sp5100_reg_layout(sp5100_tco_pci)) {
> >- dev_name = SP5100_DEVNAME;
> >- base_addr = SP5100_PM_WATCHDOG_BASE;
> >- } else {
> >- dev_name = SB800_DEVNAME;
> >- base_addr = SB800_PM_WATCHDOG_BASE;
> >- }
> >-
> > /* Request the IO ports used by this driver */
> > if (!request_muxed_region(SP5100_IO_PM_INDEX_REG,
> >- SP5100_PM_IOPORTS_SIZE, dev_name)) {
> >+ SP5100_PM_IOPORTS_SIZE, "sp5100_tco")) {
> > dev_err(dev, "I/O address 0x%04x already in use\n",
> > SP5100_IO_PM_INDEX_REG);
> > return -EBUSY;
> > }
> > /*
> >- * First, Find the watchdog timer MMIO address from indirect I/O.
> >- * Low three bits of BASE are reserved.
> >+ * Determine type of southbridge chipset.
> > */
> >- val = sp5100_tco_read_pm_reg32(base_addr) & 0xfffffff8;
> >-
> >- dev_dbg(dev, "Got 0x%04x from indirect I/O\n", val);
> >+ switch (tco->tco_reg_layout) {
> >+ case sp5100:
> >+ dev_name = SP5100_DEVNAME;
> >+ mmio_addr = sp5100_tco_read_pm_reg32(SP5100_PM_WATCHDOG_BASE) &
> >+ 0xfffffff8;
> >+ break;
> >+ case sb800:
> >+ dev_name = SB800_DEVNAME;
> >+ mmio_addr = sp5100_tco_read_pm_reg32(SB800_PM_WATCHDOG_BASE) &
> >+ 0xfffffff8;
> >+ break;
> >+ case efch:
> >+ dev_name = SB800_DEVNAME;
> >+ val = sp5100_tco_read_pm_reg8(EFCH_PM_DECODEEN);
> >+ if (val & EFCH_PM_DECODEEN_WDT_TMREN)
> >+ mmio_addr = EFCH_PM_WDT_ADDR;
> >+ break;
> >+ default:
> >+ return -ENODEV;
> >+ }
> > /* Check MMIO address conflict */
> >- if (!devm_request_mem_region(dev, val, SP5100_WDT_MEM_MAP_SIZE,
> >+ if (!mmio_addr ||
> >+ !devm_request_mem_region(dev, mmio_addr, SP5100_WDT_MEM_MAP_SIZE,
> > dev_name)) {
> >- dev_dbg(dev, "MMIO address 0x%04x already in use\n", val);
> >- /*
> >- * Secondly, Find the watchdog timer MMIO address
> >- * from SBResource_MMIO register.
> >- */
> >- if (tco_has_sp5100_reg_layout(sp5100_tco_pci)) {
> >+ if (mmio_addr)
> >+ dev_dbg(dev, "MMIO address 0x%08x already in use\n",
> >+ mmio_addr);
> >+ switch (tco->tco_reg_layout) {
> >+ case sp5100:
> >+ /*
> >+ * Secondly, Find the watchdog timer MMIO address
> >+ * from SBResource_MMIO register.
> >+ */
> > /* Read SBResource_MMIO from PCI config(PCI_Reg: 9Ch) */
> > pci_read_config_dword(sp5100_tco_pci,
> > SP5100_SB_RESOURCE_MMIO_BASE,
> >- &val);
> >- } else {
> >+ &mmio_addr);
> >+ if ((mmio_addr & (SB800_ACPI_MMIO_DECODE_EN |
> >+ SB800_ACPI_MMIO_SEL)) !=
> >+ SB800_ACPI_MMIO_DECODE_EN) {
> >+ ret = -ENODEV;
> >+ goto unreg_region;
> >+ }
> >+ mmio_addr &= ~0xFFF;
> >+ mmio_addr += SB800_PM_WDT_MMIO_OFFSET;
> >+ break;
> >+ case sb800:
> > /* Read SBResource_MMIO from AcpiMmioEn(PM_Reg: 24h) */
> >- val = sp5100_tco_read_pm_reg32(SB800_PM_ACPI_MMIO_EN);
> >- }
> >-
> >- /* The SBResource_MMIO is enabled and mapped memory space? */
> >- if ((val & (SB800_ACPI_MMIO_DECODE_EN | SB800_ACPI_MMIO_SEL)) !=
> >+ mmio_addr =
> >+ sp5100_tco_read_pm_reg32(SB800_PM_ACPI_MMIO_EN);
> >+ if ((mmio_addr & (SB800_ACPI_MMIO_DECODE_EN |
> >+ SB800_ACPI_MMIO_SEL)) !=
> > SB800_ACPI_MMIO_DECODE_EN) {
> >- dev_notice(dev,
> >- "failed to find MMIO address, giving up.\n");
> >- ret = -ENODEV;
> >- goto unreg_region;
> >+ ret = -ENODEV;
> >+ goto unreg_region;
> >+ }
> >+ mmio_addr &= ~0xFFF;
> >+ mmio_addr += SB800_PM_WDT_MMIO_OFFSET;
> >+ break;
> >+ case efch:
> >+ val = sp5100_tco_read_pm_reg8(EFCH_PM_ISACONTROL);
> >+ if (!(val & EFCH_PM_ISACONTROL_MMIOEN)) {
> >+ ret = -ENODEV;
> >+ goto unreg_region;
> >+ }
> >+ mmio_addr = EFCH_PM_ACPI_MMIO_ADDR +
> >+ EFCH_PM_ACPI_MMIO_WDT_OFFSET;
> >+ break;
> > }
> >- /* Clear unnecessary the low twelve bits */
> >- val &= ~0xFFF;
> >- /* Add the Watchdog Timer offset to base address. */
> >- val += SB800_PM_WDT_MMIO_OFFSET;
> >- /* Check MMIO address conflict */
> >- if (!devm_request_mem_region(dev, val, SP5100_WDT_MEM_MAP_SIZE,
> >+ dev_dbg(dev, "Got 0x%08x from SBResource_MMIO register\n",
> >+ mmio_addr);
> >+ if (!devm_request_mem_region(dev, mmio_addr,
> >+ SP5100_WDT_MEM_MAP_SIZE,
> > dev_name)) {
> >- dev_dbg(dev, "MMIO address 0x%04x already in use\n",
> >- val);
> >+ dev_dbg(dev, "MMIO address 0x%08x already in use\n",
> >+ mmio_addr);
> > ret = -EBUSY;
> > goto unreg_region;
> > }
> >- dev_dbg(dev, "Got 0x%04x from SBResource_MMIO register\n", val);
> > }
> >- tco->tcobase = devm_ioremap(dev, val, SP5100_WDT_MEM_MAP_SIZE);
> >+ tco->tcobase = devm_ioremap(dev, mmio_addr, SP5100_WDT_MEM_MAP_SIZE);
> > if (!tco->tcobase) {
> > dev_err(dev, "failed to get tcobase address\n");
> > ret = -ENOMEM;
> > goto unreg_region;
> > }
> >- dev_info(dev, "Using 0x%04x for watchdog MMIO address\n", val);
> >+ dev_info(dev, "Using 0x%08x for watchdog MMIO address\n", mmio_addr);
> > /* Setup the watchdog timer */
> >- tco_timer_enable();
> >+ tco_timer_enable(tco);
> > val = readl(SP5100_WDT_CONTROL(tco->tcobase));
> > if (val & SP5100_WDT_DISABLED) {
> >@@ -332,6 +385,8 @@ static int sp5100_tco_probe(struct platform_device *pdev)
> > if (!tco)
> > return -ENOMEM;
> >+ tco->tco_reg_layout = tco_reg_layout(sp5100_tco_pci);
> >+
> > wdd = &tco->wdd;
> > wdd->parent = dev;
> > wdd->info = &sp5100_tco_wdt_info;
> >diff --git a/drivers/watchdog/sp5100_tco.h b/drivers/watchdog/sp5100_tco.h
> >index 008b2094bd13..87eaf357ae01 100644
> >--- a/drivers/watchdog/sp5100_tco.h
> >+++ b/drivers/watchdog/sp5100_tco.h
> >@@ -62,3 +62,24 @@
> > #define SB800_PM_WDT_MMIO_OFFSET 0xB00
> > #define SB800_DEVNAME "SB800 TCO"
> >+
> >+/* For recent chips with embedded FCH (rev 40+) */
> >+
> >+#define EFCH_PM_DECODEEN 0x00
> >+
> >+#define EFCH_PM_DECODEEN_WDT_TMREN BIT(7)
> >+
> >+
> >+#define EFCH_PM_DECODEEN3 0x00
> >+#define EFCH_PM_DECODEEN_SECOND_RES GENMASK(1, 0)
> >+#define EFCH_PM_WATCHDOG_DISABLE ((u8)GENMASK(3, 2))
> >+
> >+/* WDT MMIO if enabled with PM00_DECODEEN_WDT_TMREN */
> >+#define EFCH_PM_WDT_ADDR 0xfeb00000
> >+
> >+#define EFCH_PM_ISACONTROL 0x04
> >+
> >+#define EFCH_PM_ISACONTROL_MMIOEN BIT(1)
> >+
> >+#define EFCH_PM_ACPI_MMIO_ADDR 0xfed80000
> >+#define EFCH_PM_ACPI_MMIO_WDT_OFFSET 0x00000b00
> >
>

\
 
 \ /
  Last update: 2018-01-04 20:21    [W:0.157 / U:0.352 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site