lkml.org 
[lkml]   [2018]   [Jan]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH v3 2/4] drivers: firmware: xilinx: Add ZynqMP firmware driver
Date
Hi Mark,
Thanks for the review,

> -----Original Message-----
> From: Mark Rutland [mailto:mark.rutland@arm.com]
> Sent: Wednesday, January 31, 2018 10:20 AM
> To: Jolly Shah <JOLLYS@xilinx.com>
> Cc: ard.biesheuvel@linaro.org; mingo@kernel.org;
> gregkh@linuxfoundation.org; matt@codeblueprint.co.uk;
> sudeep.holla@arm.com; hkallweit1@gmail.com; keescook@chromium.org;
> dmitry.torokhov@gmail.com; michal.simek@xilinx.com; robh+dt@kernel.org;
> linux-arm-kernel@lists.infradead.org; linux-kernel@vger.kernel.org;
> devicetree@vger.kernel.org; Jolly Shah <JOLLYS@xilinx.com>; Rajan Vaja
> <RAJANV@xilinx.com>
> Subject: Re: [PATCH v3 2/4] drivers: firmware: xilinx: Add ZynqMP firmware
> driver
>
> On Wed, Jan 24, 2018 at 03:21:12PM -0800, Jolly Shah wrote:
> > This patch is adding communication layer with firmware.
> > Firmware driver provides an interface to firmware APIs.
> > Interface APIs can be used by any driver to communicate to
> > PMUFW(Platform Management Unit). All requests go through ATF.
>
> > +/**
> > + * zynqmp_pm_set_wakeup_source - PM call to specify the wakeup source
> > + * while suspended
> > + * @target: Node ID of the targeted PU or subsystem
> > + * @wakeup_node:Node ID of the wakeup peripheral
> > + * @enable: Enable or disable the specified peripheral as wake source
> > + *
> > + * Return: Returns status, either success or error+reason
> > + */
> > +static int zynqmp_pm_set_wakeup_source(const u32 target,
> > + const u32 wakeup_node,
> > + const u32 enable)
> > +{
> > + return invoke_pm_fn(PM_SET_WAKEUP_SOURCE, target,
> > + wakeup_node, enable, 0, NULL); }
>
> I see many functions take a "Node ID" parameter, but these don't appear to be
> in any DT binding, and drivers (other than the debugfs driver) aren't using them.
>
> What's the plan for making use of these? Where are the node IDs going to come
> from in practice?
>
Node ids are defined in firmware.h. Node id refers to targeted PU/subsystem/peripheral for required action.

> > +/**
> > + * zynqmp_pm_system_shutdown - PM call to request a system shutdown or
> restart
> > + * @type: Shutdown or restart? 0 for shutdown, 1 for restart
> > + * @subtype: Specifies which system should be restarted or shut down
> > + *
> > + * Return: Returns status, either success or error+reason
> > + */
> > +static int zynqmp_pm_system_shutdown(const u32 type, const u32
> > +subtype) {
> > + return invoke_pm_fn(PM_SYSTEM_SHUTDOWN, type, subtype, 0, 0,
> NULL);
> > +}
>
> PSCI already has this functionality, so I'm a little confused by the duplication.
>
PSCI doesn't distinguish between shutdown scope. It can be APU/PS/System in this case.

> [...]
>
> > +/**
> > + * zynqmp_pm_get_node_status - PM call to request a node's current power
> state
> > + * @node: ID of the component or sub-system in question
> > + * @status: Current operating state of the requested node
> > + * @requirements: Current requirements asserted on the node,
> > + * used for slave nodes only.
> > + * @usage: Usage information, used for slave nodes only:
> > + * 0 - No master is currently using the node
> > + * 1 - Only requesting master is currently using the node
> > + * 2 - Only other masters are currently using the node
> > + * 3 - Both the current and at least one other master
> > + * is currently using the node
>
> These should probably have corresponding macros or enum values.
Will add macros in next version patch.

>
> [...]
>
> > +/**
> > + * zynqmp_pm_sha_hash - Access the SHA engine to calculate the hash
> > + * @address: Address of the data/ Address of output buffer where
> > + * hash should be stored.
> > + * @size: Size of the data.
> > + * @flags:
> > + * BIT(0) - Sha3 init (Here address and size inputs can be NULL)
> > + * BIT(1) - Sha3 update (address should holds the )
>
> Missing "data", I guess?
Yes will update in next version patch.

>
> > + * BIT(2) - Sha3 final (address should hold the address of
> > + * buffer to store hash)
>
> Is the SHA engine coherent? Or is cache maintenance necessary?
>
> [...]
It is coherent. Update/Final has below significance here:
BIT(1) - To call Sha3_Update API which can be called multiple times when data is not contiguous.
BIT(2) - to get final hash of the whole updated data. Hash will be overwritten at provided address with 48 bytes.

>
> > +/**
> > + * zynqmp_pm_pinctrl_request - Request Pin from firmware
> > + * @pin: Pin number to request
> > + *
>
> No DT binding for the pinctrl bits?
>
> [...]
It doesn't require any bindings. Calling drivers will have DT binding for pins they use.


>
> > +/**
> > + * zynqmp_pm_clock_enable - Enable the clock for given id
> > + * @clock_id: ID of the clock to be enabled
> > + *
>
> Likewise for the clocks?
>
It doesn't require bindings too.

> > +/**
> > + * get_eemi_ops - Get eemi ops functions
> > + *
> > + * Return: - pointer of eemi_ops structure
> > + */
> > +const struct zynqmp_eemi_ops *get_eemi_ops(void) {
> > + return &eemi_ops;
> > +}
> > +EXPORT_SYMBOL_GPL(get_eemi_ops);
> > +
> > +static int __init zynqmp_plat_init(void) {
> > + struct device_node *np;
> > + int ret = 0;
> > +
> > + np = of_find_compatible_node(NULL, NULL, "xlnx,zynqmp");
> > + if (!np)
> > + return 0;
> > + of_node_put(np);
> > +
> > + /* We're running on a ZynqMP machine, the PM node is mandatory. */
> > + np = of_find_compatible_node(NULL, NULL, "xlnx,zynqmp-firmware");
> > + if (!np) {
> > + pr_warn("%s: pm node not found\n", __func__);
> > + return -ENXIO;
> > + }
> > +
> > + ret = get_set_conduit_method(np);
> > + if (ret) {
> > + of_node_put(np);
> > + return ret;
> > + }
> > +
> > + /* Check PM API version number */
> > + zynqmp_pm_get_api_version(&pm_api_version);
> > + if (pm_api_version != ZYNQMP_PM_VERSION) {
> > + panic("%s power management API version error. Expected:
> v%d.%d - Found: v%d.%d\n",
> > + __func__,
> > + ZYNQMP_PM_VERSION_MAJOR,
> ZYNQMP_PM_VERSION_MINOR,
> > + pm_api_version >> 16, pm_api_version & 0xffff);
> > + }
> > +
> > + pr_info("%s Power management API v%d.%d\n", __func__,
> > + ZYNQMP_PM_VERSION_MAJOR,
> ZYNQMP_PM_VERSION_MINOR);
> > +
> > + of_node_put(np);
> > +
> > + return ret;
> > +}
> > +
> > +early_initcall(zynqmp_plat_init);
>
> Why does this need to be an early initcall? Can't we probe this as a platform
> device?
>
> Thanks,
> Mark.

\
 
 \ /
  Last update: 2018-02-01 02:24    [W:1.128 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site