lkml.org 
[lkml]   [2018]   [Jan]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH 1/2] acpi: arm64: add iort support for PMCG
On Tue, Jan 30, 2018 at 10:39:20AM +0000, Shameerali Kolothum Thodi wrote:
> Hi Neil/Lorenzo,
>
> > -----Original Message-----
> > From: linux-arm-kernel [mailto:linux-arm-kernel-bounces@lists.infradead.org]
> > On Behalf Of Neil Leeder
> > Sent: Friday, August 04, 2017 8:59 PM
> > To: Will Deacon <will.deacon@arm.com>; Mark Rutland
> > <mark.rutland@arm.com>
> > Cc: Mark Langsdorf <mlangsdo@redhat.com>; Jon Masters
> > <jcm@redhat.com>; Timur Tabi <timur@codeaurora.org>; linux-
> > kernel@vger.kernel.org; Mark Brown <broonie@kernel.org>; Mark Salter
> > <msalter@redhat.com>; nleeder@codeaurora.org; linux-arm-
> > kernel@lists.infradead.org
> > Subject: [PATCH 1/2] acpi: arm64: add iort support for PMCG
> >
> > Add support for the SMMU Performance Monitor Counter Group
> > information from ACPI. This is in preparation for its use
> > in the SMMU v3 PMU driver.
>
> [...]
>
> > static __init
> > const struct iort_iommu_config *iort_get_iommu_cfg(struct acpi_iort_node
> > *node)
> > {
> > @@ -1001,6 +1041,8 @@ const struct iort_iommu_config
> > *iort_get_iommu_cfg(struct acpi_iort_node *node)
> > return &iort_arm_smmu_v3_cfg;
> > case ACPI_IORT_NODE_SMMU:
> > return &iort_arm_smmu_cfg;
> > + case ACPI_IORT_NODE_PMCG:
> > + return &iort_arm_smmu_pmcg_cfg;
>
> I understand this series will be revised based on the iort spec update.
>
> This Is to clarify few queries we have with respect to one of our hisilicon
> platform which has support for SMMU v3 PMCG. In our implementation
> the base address for the PMCG is defined at a IMP DEF address offset
> within the SMMUv3 page 0 address space. And as per SMMU spec,
>
> " The Performance Monitor Counter Groups are standalone monitoring
> facilities and, as such, can be implemented in separate components that
> are all associated with (but not necessarily part of) an SMMU"
>
> It looks like PMCG can be part of SMMU, it is not clear whether this kind
> of address mapping is forbidden or not. If this is an accepted scenario, then
> the devm_ioremap_resource() call in SMMv3 probe will fail as it reports conflict.
>
> As far as I can see, the above code just checks the iort node type is PMCG
> and assumes that its SMMU PMCG. As per IORT spec, it make sense to check
> the node reference filed and make that call.
>
> And to fix the resource conflict issue we have, is it possible to treat the PMCG
> node as the child of the SMMU and call the platform_device_add() appropriately
> to avoid the conflict? I am not sure this will fix the issue and also about the order
> in which SMMU and PMCG devices will be populated will have an impact on this.
>
> Please let me know your thoughts on this.

I went back and re-read the patches, I think the point here is that the
perf driver (ie PATCH 2 that, by the way, is not maiinline) uses
devm_ioremap_resource() to map the counters and that's what is causing
failures when PMCG is part of SMMUv3 registers.

It is the resources hierarchy that is wrong and in turn, I do not think
devm_request_mem_region() is the right way of requesting it for the
PMCG driver.

I need to look into this but I suspect that's something that should
be handled in the PMCG driver, that has to request the memory region
_differently_ (ie ioremap copes with this overlap - it is the
devm_request_mem_region() in devm_ioremap_resource() that fails, correct
?).

Certainly we need to create in IORT the resources with the correct
hierarchy (I reckon DT does it already if the right device hierarchy is
specified).

Lorenzo

> Thanks,
> Shameer
>
> > default:
> > return NULL;
> > }
> > @@ -1056,6 +1098,15 @@ static int __init
> > iort_add_smmu_platform_device(struct acpi_iort_node *node)
> > if (ret)
> > goto dev_put;
> >
> > + /* End of init for PMCG */
> > + if (node->type == ACPI_IORT_NODE_PMCG) {
> > + ret = platform_device_add(pdev);
> > + if (ret)
> > + goto dev_put;
> > +
> > + return 0;
> > + }
> > +
> > /*
> > * We expect the dma masks to be equivalent for
> > * all SMMUs set-ups
> > @@ -1131,6 +1182,9 @@ static void __init iort_init_platform_devices(void)
> > acpi_free_fwnode_static(fwnode);
> > return;
> > }
> > + } else if (iort_node->type == ACPI_IORT_NODE_PMCG) {
> > + if (iort_add_smmu_platform_device(iort_node))
> > + return;
> > }
> >
> > iort_node = ACPI_ADD_PTR(struct acpi_iort_node, iort_node,
> > diff --git a/include/acpi/actbl2.h b/include/acpi/actbl2.h
> > index 707dda74..2169b6f 100644
> > --- a/include/acpi/actbl2.h
> > +++ b/include/acpi/actbl2.h
> > @@ -695,7 +695,8 @@ enum acpi_iort_node_type {
> > ACPI_IORT_NODE_NAMED_COMPONENT = 0x01,
> > ACPI_IORT_NODE_PCI_ROOT_COMPLEX = 0x02,
> > ACPI_IORT_NODE_SMMU = 0x03,
> > - ACPI_IORT_NODE_SMMU_V3 = 0x04
> > + ACPI_IORT_NODE_SMMU_V3 = 0x04,
> > + ACPI_IORT_NODE_PMCG = 0x05
> > };
> >
> > struct acpi_iort_id_mapping {
> > @@ -811,6 +812,12 @@ struct acpi_iort_smmu_v3 {
> > #define ACPI_IORT_SMMU_V3_COHACC_OVERRIDE (1)
> > #define ACPI_IORT_SMMU_V3_HTTU_OVERRIDE (1<<1)
> >
> > +struct acpi_iort_pmcg {
> > + u64 base_address; /* PMCG base address */
> > + u32 overflow_gsiv;
> > + u32 node_reference;
> > +};
> > +
> >
> > /****************************************************************
> > ***************
> > *
> > * IVRS - I/O Virtualization Reporting Structure
> > --
> > Qualcomm Datacenter Technologies, Inc. as an affiliate of Qualcomm
> > Technologies Inc.
> > Qualcomm Technologies, Inc. is a member of the Code Aurora Forum,
> > a Linux Foundation Collaborative Project.
> >
> >
> > _______________________________________________
> > linux-arm-kernel mailing list
> > linux-arm-kernel@lists.infradead.org
> > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

\
 
 \ /
  Last update: 2018-01-30 19:00    [W:0.122 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site