lkml.org 
[lkml]   [2018]   [Jan]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[v2 PATCH 5/6] dt-bindings: usb: mtk-xhci: update USB wakeup properties
Date
Add two arguments in "mediatek,syscon-wakeup" to support multi
wakeup glue layer between SSUSB and SPM, and use standard property
"wakeup-source" to replace the private "mediatek,wakeup-src"

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
.../devicetree/bindings/usb/mediatek,mtk-xhci.txt | 16 ++++++++++------
1 file changed, 10 insertions(+), 6 deletions(-)

diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt
index 3059596..5842868 100644
--- a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt
+++ b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt
@@ -35,10 +35,14 @@ Required properties:
- phys : a list of phandle + phy specifier pairs

Optional properties:
- - mediatek,wakeup-src : 1: ip sleep wakeup mode; 2: line state wakeup
- mode;
- - mediatek,syscon-wakeup : phandle to syscon used to access USB wakeup
- control register, it depends on "mediatek,wakeup-src".
+ - wakeup-source : enable USB remote wakeup;
+ - mediatek,syscon-wakeup : phandle to syscon used to access the register
+ of the USB wakeup glue layer between xHCI and SPM; it depends on
+ "wakeup-source", and has two arguments:
+ - the first one : register base address of the glue layer in syscon;
+ - the second one : hardware version of the glue layer
+ - 1 : used by mt8173 etc
+ - 2 : used by mt2712 etc
- mediatek,u3p-dis-msk : mask to disable u3ports, bit0 for u3port0,
bit1 for u3port1, ... etc;
- vbus-supply : reference to the VBUS regulator;
@@ -64,8 +68,8 @@ usb30: usb@11270000 {
vusb33-supply = <&mt6397_vusb_reg>;
vbus-supply = <&usb_p1_vbus>;
usb3-lpm-capable;
- mediatek,syscon-wakeup = <&pericfg>;
- mediatek,wakeup-src = <1>;
+ mediatek,syscon-wakeup = <&pericfg 0x400 1>;
+ wakeup-source;
};

2nd: dual-role mode with xHCI driver
--
1.9.1
\
 
 \ /
  Last update: 2018-01-03 10:01    [W:0.068 / U:0.908 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site