lkml.org 
[lkml]   [2018]   [Jan]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 3/6] irqchip: Add the ingenic-tcu-intc driver
On Mon, Jan 01, 2018 at 03:33:41PM +0100, Paul Cercueil wrote:
> This simple driver handles the IRQ chip of the TCU
> (Timer Counter Unit) of the JZ47xx Ingenic SoCs.
>
> Signed-off-by: Paul Cercueil <paul@crapouillou.net>
> ---
> .../bindings/interrupt-controller/ingenic,tcu.txt | 32 +++++
> drivers/irqchip/Kconfig | 6 +
> drivers/irqchip/Makefile | 1 +
> drivers/irqchip/irq-ingenic-tcu.c | 151 +++++++++++++++++++++
> 4 files changed, 190 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/interrupt-controller/ingenic,tcu.txt
> create mode 100644 drivers/irqchip/irq-ingenic-tcu.c
>
> v2: Use SPDX identifier for the license
> Make KConfig option select CONFIG_IRQ_DOMAIN since we depend on it
>
> diff --git a/Documentation/devicetree/bindings/interrupt-controller/ingenic,tcu.txt b/Documentation/devicetree/bindings/interrupt-controller/ingenic,tcu.txt
> new file mode 100644
> index 000000000000..a3e6318f8461
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/interrupt-controller/ingenic,tcu.txt
> @@ -0,0 +1,32 @@
> +Ingenic SoCs Timer/Counter Unit Interrupt Controller
> +
> +Required properties:
> +
> +- compatible : should be "ingenic,<socname>-tcu-intc". Valid strings are:
> + * ingenic,jz4740-tcu-intc
> + * ingenic,jz4770-tcu-intc
> + * ingenic,jz4780-tcu-intc
> +- interrupt-controller : Identifies the node as an interrupt controller
> +- #interrupt-cells : Specifies the number of cells needed to encode an
> + interrupt source. The value shall be 1.
> +- interrupt-parent : phandle of the interrupt controller.
> +- interrupts : Specifies the interrupt the controller is connected to.
> +
> +Example:
> +
> +/ {
> + regmap {

regmap is a Linuxism.

> + compatible = "simple-mfd", "syscon";

Need a specific compatible string here. Neither of these are valid by
themselves.

> + reg = <0x10002000 0x1000>;
> +
> + tcu: interrupt-controller {

The TCU is only an interrupt controller?

> + compatible = "ingenic,jz4740-tcu-intc";

Is there a register range associated with this block? If so, add a reg
property even if regmap doesn't need it.

> +
> + interrupt-controller;
> + #interrupt-cells = <1>;
> +
> + interrupt-parent = <&intc>;
> + interrupts = <15>;
> + };
> + };
> +};

\
 
 \ /
  Last update: 2018-01-03 21:59    [W:0.259 / U:0.956 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site