lkml.org 
[lkml]   [2018]   [Jan]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 10/13] ocxl: Add Makefile and Kconfig
From
Date
On 19/12/17 02:21, Frederic Barrat wrote:
> OCXL_BASE triggers the platform support needed by the driver.
>
> Signed-off-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
> ---
> drivers/misc/Kconfig | 1 +
> drivers/misc/Makefile | 1 +
> drivers/misc/ocxl/Kconfig | 25 +++++++++++++++++++++++++
> drivers/misc/ocxl/Makefile | 10 ++++++++++
> 4 files changed, 37 insertions(+)
> create mode 100644 drivers/misc/ocxl/Kconfig
> create mode 100644 drivers/misc/ocxl/Makefile
>
> diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
> index f1a5c2357b14..0534f338c84a 100644
> --- a/drivers/misc/Kconfig
> +++ b/drivers/misc/Kconfig
> @@ -508,4 +508,5 @@ source "drivers/misc/mic/Kconfig"
> source "drivers/misc/genwqe/Kconfig"
> source "drivers/misc/echo/Kconfig"
> source "drivers/misc/cxl/Kconfig"
> +source "drivers/misc/ocxl/Kconfig"
> endmenu
> diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
> index 5ca5f64df478..73326d54e246 100644
> --- a/drivers/misc/Makefile
> +++ b/drivers/misc/Makefile
> @@ -55,6 +55,7 @@ obj-$(CONFIG_CXL_BASE) += cxl/
> obj-$(CONFIG_ASPEED_LPC_CTRL) += aspeed-lpc-ctrl.o
> obj-$(CONFIG_ASPEED_LPC_SNOOP) += aspeed-lpc-snoop.o
> obj-$(CONFIG_PCI_ENDPOINT_TEST) += pci_endpoint_test.o
> +obj-$(CONFIG_OCXL) += ocxl/
>
> lkdtm-$(CONFIG_LKDTM) += lkdtm_core.o
> lkdtm-$(CONFIG_LKDTM) += lkdtm_bugs.o
> diff --git a/drivers/misc/ocxl/Kconfig b/drivers/misc/ocxl/Kconfig
> new file mode 100644
> index 000000000000..4496b61f48db
> --- /dev/null
> +++ b/drivers/misc/ocxl/Kconfig
> @@ -0,0 +1,25 @@
> +#
> +# Open Coherent Accelerator (OCXL) compatible devices
> +#
> +
> +config OCXL_BASE
> + bool
> + default n
> + select PPC_COPRO_BASE
> +
> +config OCXL
> + tristate "Support for Open Coherent Accelerators (OCXL)"
> + depends on PPC_POWERNV && PCI && EEH
> + select OCXL_BASE
> + default m
> + help
> +
> + Select this option to enable driver support for Open
> + Coherent Accelerators (OCXL). OCXL is otherwise known as
> + Open Coherent Accelerator Processor Interface (OCAPI).
> + OCAPI allows accelerators in FPGAs to be coherently attached
> + to a CPU through a Open CAPI link. This driver enables
> + userspace programs to access these accelerators through
> + devices found in /dev/ocxl/

I'd prefer more consistency in how we refer to OpenCAPI. "ocxl" is a
driver name that we have purely for historical reasons, it's not really
the name of anything else. I know throughout the various specs and code,
we use "OCAPI" a lot, but that's not really an abbreviation that should
be "user-facing".

Something like:

config OCXL
tristate "OpenCAPI coherent accelerator support"
help

Select this option to enable the ocxl driver for Open Coherent

Accelerator Processor Interface (OpenCAPI) devices.

OpenCAPI allows FPGA and ASIC accelerators to be coherently
attached to a CPU over an OpenCAPI link.

The ocxl driver enables userspace programs to access these
accelerators through devices in /dev/ocxl/.

For more information, see http://opencapi.org.

If unsure, say N.

> +
> + If unsure, say N.
> diff --git a/drivers/misc/ocxl/Makefile b/drivers/misc/ocxl/Makefile
> new file mode 100644
> index 000000000000..f75853411cfd
> --- /dev/null
> +++ b/drivers/misc/ocxl/Makefile
> @@ -0,0 +1,10 @@
> +ccflags-$(CONFIG_PPC_WERROR) += -Werror
> +
> +ocxl-y += main.o pci.o config.o file.o pasid.o
> +ocxl-y += link.o context.o afu_irq.o sysfs.o trace.o
> +obj-$(CONFIG_OCXL) += ocxl.o
> +
> +# For tracepoints to include our trace.h from tracepoint infrastructure:
> +CFLAGS_trace.o := -I$(src)
> +
> +# ccflags-y += -DDEBUG
>

--
Andrew Donnellan OzLabs, ADL Canberra
andrew.donnellan@au1.ibm.com IBM Australia Limited

\
 
 \ /
  Last update: 2018-01-03 06:49    [W:0.189 / U:1.712 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site