Messages in this thread | | | Subject | Re: [PATCH v7 2/2] media: V3s: Add support for Allwinner CSI. | From | Randy Dunlap <> | Date | Mon, 29 Jan 2018 13:49:14 -0800 |
| |
On 01/29/2018 01:21 AM, Yong Deng wrote: > Allwinner V3s SoC features two CSI module. CSI0 is used for MIPI CSI-2 > interface and CSI1 is used for parallel interface. This is not > documented in datasheet but by test and guess. > > This patch implement a v4l2 framework driver for it. > > Currently, the driver only support the parallel interface. MIPI-CSI2, > ISP's support are not included in this patch. > > Tested-by: Maxime Ripard <maxime.ripard@free-electrons.com> > Signed-off-by: Yong Deng <yong.deng@magewell.com> > ---
A previous version (I think v6) had a build error with the use of PHYS_OFFSET, so Kconfig was modified to depend on ARM and ARCH_SUNXI (one of which seems to be overkill). As is here, the COMPILE_TEST piece is meaningless for all arches except ARM. If you care enough for COMPILE_TEST (and I would), then you could make COMPILE_TEST useful on any arch by removing the "depends on ARM" (the ARCH_SUNXI takes care of that) and by having an alternate value for PHYS_OFFSET, like so:
+#if defined(CONFIG_COMPILE_TEST) && !defined(PHYS_OFFSET) +#define PHYS_OFFSET 0 +#endif
With those 2 changes, the driver builds for me on x86_64.
> diff --git a/drivers/media/platform/sunxi/sun6i-csi/Kconfig b/drivers/media/platform/sunxi/sun6i-csi/Kconfig > new file mode 100644 > index 0000000..f80c965 > --- /dev/null > +++ b/drivers/media/platform/sunxi/sun6i-csi/Kconfig > @@ -0,0 +1,10 @@ > +config VIDEO_SUN6I_CSI > + tristate "Allwinner V3s Camera Sensor Interface driver" > + depends on ARM > + depends on VIDEO_V4L2 && COMMON_CLK && VIDEO_V4L2_SUBDEV_API && HAS_DMA > + depends on ARCH_SUNXI || COMPILE_TEST > + select VIDEOBUF2_DMA_CONTIG > + select REGMAP_MMIO > + select V4L2_FWNODE > + ---help--- > + Support for the Allwinner Camera Sensor Interface Controller on V3s.
thanks, -- ~Randy
| |