lkml.org 
[lkml]   [2018]   [Jan]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [linux-sunxi] [PATCH 16/16] arm: dts: sun8i: a83t: add thermal zone to A83T
From
Date


On 26.01.2018 17:25, Samuel Holland wrote:
> On 01/26/18 09:19, Philipp Rossak wrote:
>> This patch adds the thermal zones to the A83T. Sensor 0 is located in the
>> cpu cluster 0. Sensor 1 is located in cluster 1 and Sensor 3 is located
>> in the gpu.
>
> You mention sensor 3 here, but have sensor 2 in the device tree.
That is a typo/wrong counting error. This should be sensor 2.

I will fix that in the next version of this patch series.

>> Signed-off-by: Philipp Rossak <embed3d@gmail.com>
>> ---
>> arch/arm/boot/dts/sun8i-a83t.dtsi | 20 ++++++++++++++++++++
>> 1 file changed, 20 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
>> index 9e53ff5ac4ed..4259a8726031 100644
>> --- a/arch/arm/boot/dts/sun8i-a83t.dtsi
>> +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
>> @@ -747,4 +747,24 @@
>> #size-cells = <0>;
>> };
>> };
>> +
>> + thermal-zones {
>> + cpu0_thermal: cpu0-thermal {
>> + polling-delay-passive = <1000>;
>> + polling-delay = <5000>;
>> + thermal-sensors = <&ths 0>;
>> + };
>> +
>> + cpu1_thermal: cpu1-thermal {
>> + polling-delay-passive = <1000>;
>> + polling-delay = <5000>;
>> + thermal-sensors = <&ths 1>;
>> + };
>> +
>> + gpu_thermal: gpu-thermal {
>> + polling-delay-passive = <1000>;
>> + polling-delay = <5000>;
>> + thermal-sensors = <&ths 2>;
>
> ^^^^ here
>
>> + };
>> + };
>> };
>>
>
> Thanks,
> Samuel
>

Thanks,
Philipp

\
 
 \ /
  Last update: 2018-01-26 18:35    [W:0.520 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site