lkml.org 
[lkml]   [2018]   [Jan]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 6/8] irqchip/gic-v3-its: add ability to resend MAPC on resume
On Sun, Jan 14, 2018 at 2:56 AM, Marc Zyngier <marc.zyngier@arm.com> wrote:
> On Fri, 12 Jan 2018 21:24:20 +0000,
> Derek Basehore wrote:
>>
>> This adds a DT-binding to resend the MAPC command to an ITS node on
>
> This isn't a DT binding. That's the driver implementation. The binding
> is what you put in Documentation/device-tree...
>
>> resume. If the ITS is powered down during suspend and the collections
>> are not backed by memory, the ITS will lose that state. This just sets
>> up the known state for the collections after the ITS is restored.
>>
>> Change-Id: I4fe7f3f16500e1d3b14368262f03a43509c0049b
>> Signed-off-by: Derek Basehore <dbasehore@chromium.org>
>> ---
>> drivers/irqchip/irq-gic-v3-its.c | 85 ++++++++++++++++++++++------------------
>> 1 file changed, 47 insertions(+), 38 deletions(-)
>>
>> diff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c
>> index 5cb808e3d0bf..6d2688a2ee67 100644
>> --- a/drivers/irqchip/irq-gic-v3-its.c
>> +++ b/drivers/irqchip/irq-gic-v3-its.c
>> @@ -46,6 +46,7 @@
>> #define ITS_FLAGS_CMDQ_NEEDS_FLUSHING (1ULL << 0)
>> #define ITS_FLAGS_WORKAROUND_CAVIUM_22375 (1ULL << 1)
>> #define ITS_FLAGS_WORKAROUND_CAVIUM_23144 (1ULL << 2)
>> +#define ITS_FLAGS_RESEND_MAPC_ON_RESUME (1ULL << 3)
>>
>> #define RDIST_FLAGS_PROPBASE_NEEDS_FLUSHING (1 << 0)
>>
>> @@ -1949,52 +1950,53 @@ static void its_cpu_init_lpis(void)
>> dsb(sy);
>> }
>>
>> -static void its_cpu_init_collection(void)
>> +static void its_cpu_init_collection(struct its_node *its)
>> {
>> - struct its_node *its;
>> - int cpu;
>> -
>> - spin_lock(&its_lock);
>> - cpu = smp_processor_id();
>> -
>> - list_for_each_entry(its, &its_nodes, entry) {
>> - u64 target;
>> + int cpu = smp_processor_id();
>> + u64 target;
>>
>> - /* avoid cross node collections and its mapping */
>> - if (its->flags & ITS_FLAGS_WORKAROUND_CAVIUM_23144) {
>> - struct device_node *cpu_node;
>> + /* avoid cross node collections and its mapping */
>> + if (its->flags & ITS_FLAGS_WORKAROUND_CAVIUM_23144) {
>> + struct device_node *cpu_node;
>>
>> - cpu_node = of_get_cpu_node(cpu, NULL);
>> - if (its->numa_node != NUMA_NO_NODE &&
>> - its->numa_node != of_node_to_nid(cpu_node))
>> - continue;
>> - }
>> + cpu_node = of_get_cpu_node(cpu, NULL);
>> + if (its->numa_node != NUMA_NO_NODE &&
>> + its->numa_node != of_node_to_nid(cpu_node))
>> + return;
>> + }
>>
>> + /*
>> + * We now have to bind each collection to its target
>> + * redistributor.
>> + */
>> + if (gic_read_typer(its->base + GITS_TYPER) & GITS_TYPER_PTA) {
>> /*
>> - * We now have to bind each collection to its target
>> + * This ITS wants the physical address of the
>> * redistributor.
>> */
>> - if (gic_read_typer(its->base + GITS_TYPER) & GITS_TYPER_PTA) {
>> - /*
>> - * This ITS wants the physical address of the
>> - * redistributor.
>> - */
>> - target = gic_data_rdist()->phys_base;
>> - } else {
>> - /*
>> - * This ITS wants a linear CPU number.
>> - */
>> - target = gic_read_typer(gic_data_rdist_rd_base() + GICR_TYPER);
>> - target = GICR_TYPER_CPU_NUMBER(target) << 16;
>> - }
>> + target = gic_data_rdist()->phys_base;
>> + } else {
>> + /* This ITS wants a linear CPU number. */
>> + target = gic_read_typer(gic_data_rdist_rd_base() + GICR_TYPER);
>> + target = GICR_TYPER_CPU_NUMBER(target) << 16;
>> + }
>>
>> - /* Perform collection mapping */
>> - its->collections[cpu].target_address = target;
>> - its->collections[cpu].col_id = cpu;
>> + /* Perform collection mapping */
>> + its->collections[cpu].target_address = target;
>> + its->collections[cpu].col_id = cpu;
>>
>> - its_send_mapc(its, &its->collections[cpu], 1);
>> - its_send_invall(its, &its->collections[cpu]);
>> - }
>> + its_send_mapc(its, &its->collections[cpu], 1);
>> + its_send_invall(its, &its->collections[cpu]);
>> +}
>> +
>> +static void its_cpu_init_collections(void)
>> +{
>> + struct its_node *its;
>> +
>> + spin_lock(&its_lock);
>> +
>> + list_for_each_entry(its, &its_nodes, entry)
>> + its_cpu_init_collection(its);
>>
>> spin_unlock(&its_lock);
>> }
>> @@ -3089,6 +3091,9 @@ void its_restore_enable(void)
>> its_write_baser(its, &its->tables[i],
>> its->tables[i].val);
>> writel_relaxed(ctx->ctlr, base + GITS_CTLR);
>> +
>> + if (its->flags & ITS_FLAGS_RESEND_MAPC_ON_RESUME)
>> + its_cpu_init_collection(its);
>> }
>> spin_unlock(&its_lock);
>> }
>> @@ -3312,6 +3317,10 @@ static int __init its_probe_one(struct resource *res,
>> ctlr |= GITS_CTLR_ImDe;
>> writel_relaxed(ctlr, its->base + GITS_CTLR);
>>
>> + if (fwnode_property_present(its->fwnode_handle,
>> + "resend-mapc-on-resume"))
>> + its->flags |= ITS_FLAGS_RESEND_MAPC_ON_RESUME;
>
> This function is firmware agnostic, and I really don't want to make
> this thing a general purpose property.
>
> Please set this as a quirk when you detect some particular combination
> of HW and firmware (in your case, GIC500 + this property). And again,
> the property name is totally backward. IT should be something like
> "collection-state-lost-on-suspend".

So name it ITS_FLAGS_WORKAROUND_GIC500_MAPC or should there be a quirk
number for it?

>
>> +
>> err = its_init_domain(handle, its);
>> if (err)
>> goto out_free_tables;
>> @@ -3347,7 +3356,7 @@ int its_cpu_init(void)
>> return -ENXIO;
>> }
>> its_cpu_init_lpis();
>> - its_cpu_init_collection();
>> + its_cpu_init_collections();
>> }
>>
>> return 0;
>> --
>> 2.16.0.rc1.238.g530d649a79-goog
>>
>
> Thanks,
>
> M.

\
 
 \ /
  Last update: 2018-01-26 00:07    [W:0.056 / U:0.112 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site