lkml.org 
[lkml]   [2018]   [Jan]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v6 00/41] ARM: davinci: convert to common clock framework​
2018-01-23 19:26 GMT+01:00 David Lechner <david@lechnology.com>:
> On 01/23/2018 12:10 PM, Bartosz Golaszewski wrote:
>>
>> 2018-01-23 18:03 GMT+01:00 Adam Ford <aford173@gmail.com>:
>>>
>>> On Tue, Jan 23, 2018 at 10:06 AM, David Lechner <david@lechnology.com>
>>> wrote:
>>>>
>>>> On 01/23/2018 10:03 AM, David Lechner wrote:
>>>>>
>>>>>
>>>>> You can see if the clock is enabled by running:
>>>>>
>>>>> cat /sys/kernel/debug/clk/clk_summary
>>>>>
>>>>
>>>> I just realized if you can't boot, you can't do this. :-/
>>>
>>>
>>> I can boot with the latest set in your git repo, but the Ethernet
>>> doesn't apparently fully operate. I don't get errors, but I cannot
>>> get a dhcp address.
>>>
>>> I'll try to do a more exhaustive test later today to get an idea of
>>> what works and what doesn't. When I ran my basic tests, I just did a
>>> feel-good boot test (and reboot test)
>>>
>>> adam
>>
>>
>> FYI: manually calling clk_prepare_enable() in the davinci_mdio driver
>> seems to at least fix the ethernet. In master branch it's done by
>> pm_runtime_get_sync() (in davinci_mdio_reset()). However I'm still
>> getting several oopses and WARNs so there's some more work to do.
>>
>
> Hmm... I'm wondering if we need to also add #power-domain-cells to the
> PSC clocks and power-domains properties to the consumers.
>
> For this specific case though, it seems strange to me that the drivers
> to clk_get() and clk_get_rate() but never enable the clocks.
>
>
> Also, are the oopses and WARNs the same as before?

No, the ones before were all related to the ethernet failing, now I
get several stack traces from drm. Posted them on pastebin[1].

Thanks,
Bartosz

[1] https://pastebin.com/H3yZ5xHv

\
 
 \ /
  Last update: 2018-01-23 19:35    [W:0.184 / U:0.820 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site