lkml.org 
[lkml]   [2018]   [Jan]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCHv5 4/5] ARM: dts: imx6q-b650v3: Add switch port configuration
From
Date


On 01/23/2018 07:03 AM, Sebastian Reichel wrote:
> This adds support for the Marvell switch and names the network
> ports according to the labels, that can be found next to the
> connectors. The switch is connected to the host system using a
> PCI based network card.
>
> The PCI bus configuration has been written using the following
> information:
>
> root@b650v3# lspci -tv
> -[0000:00]---00.0-[01]----00.0 Intel Corporation I210 Gigabit Network Connection
> root@b650v3# lspci -nn
> 00:00.0 PCI bridge [0604]: Synopsys, Inc. Device [16c3:abcd] (rev 01)
> 01:00.0 Ethernet controller [0200]: Intel Corporation I210 Gigabit Network Connection [8086:1533] (rev 03)
>
> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>

Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
--
Florian

\
 
 \ /
  Last update: 2018-01-23 16:35    [W:0.066 / U:0.232 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site