lkml.org 
[lkml]   [2018]   [Jan]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 1/2] Input: Add driver for Cypress Generation 5 touchscreen
Hello Marcus,

Thank you for the review.

Le Mon, 22 Jan 2018 21:11:09 +0100,
Marcus Folkesson <marcus.folkesson@gmail.com> a écrit :

> Mylene,
>
> On Fri, Dec 01, 2017 at 04:39:56PM +0100, Mylène Josserand wrote:
> > +++ b/drivers/input/touchscreen/cyttsp5.c
> > @@ -0,0 +1,1110 @@
> > +/*
> > + * Parade TrueTouch(TM) Standard Product V5 Module.
> > + * For use with Parade touchscreen controllers.
> > + *
> > + * Copyright (C) 2015 Parade Technologies
> > + * Copyright (C) 2012-2015 Cypress Semiconductor
> > + * Copyright (C) 2017 Free Electrons
> > + *
> > + * Author: Mylène Josserand <mylene.josserand@free-electrons.com>
> > + *
> > + * This program is free software; you can redistribute it and/or
> > + * modify it under the terms of the GNU General Public License
> > + * version 2, and only version 2, as published by the
> > + * Free Software Foundation.
>
> Please use SPDX license Identifier to describe the license.
>
> E.g.
> SPDX-License-Identifier: GPL-2.0
>
> Also, the MODULE_LICENSE means GPL 2.0 or later per module.h and this does
> not match the license description.
>
> Could you make sure they are in sync?

You are right, I will check that, thanks.

>
>
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > + * GNU General Public License for more details.
> > + *
> > + */
> > +
> > +#include <asm/unaligned.h>
> > +#include <linux/crc-itu-t.h>
> > +#include <linux/delay.h>
> > +#include <linux/device.h>
> > +#include <linux/gpio.h>
> > +#include <linux/input/mt.h>
> > +#include <linux/input/touchscreen.h>
> > +#include <linux/interrupt.h>
> > +#include <linux/i2c.h>
> > +#include <linux/module.h>
> > +#include <linux/of_device.h>
> > +#include <linux/regmap.h>
>
> #include <linux/bitops.h>
>
> since you are using BIT()

okay

>
>
> [snip]
>
>
> > +static int cyttsp5_setup_input_device(struct device *dev)
> > +{
> > + struct cyttsp5 *ts = dev_get_drvdata(dev);
> > + struct cyttsp5_sysinfo *si = &ts->sysinfo;
> > + int max_x, max_y, max_p;
> > + int max_x_tmp, max_y_tmp;
> > + int rc;
> > +
> > + __set_bit(EV_ABS, ts->input->evbit);
> > + __set_bit(EV_REL, ts->input->evbit);
> > + __set_bit(EV_KEY, ts->input->evbit);
> > +
> > + max_x_tmp = si->sensing_conf_data.res_x;
> > + max_y_tmp = si->sensing_conf_data.res_y;
> > + max_x = max_y_tmp - 1;
> > + max_y = max_x_tmp - 1;
> > + max_p = si->sensing_conf_data.max_z;
> > +
> > + input_mt_init_slots(ts->input, si->tch_abs[CY_TCH_T].max, 0);
> > +
> > + __set_bit(ABS_MT_POSITION_X, ts->input->absbit);
> > + __set_bit(ABS_MT_POSITION_Y, ts->input->absbit);
> > + __set_bit(ABS_MT_PRESSURE, ts->input->absbit);
>
> Not needed, input_set_abs_params() will set the bits for you below.

Yes, I will remove it.

>
>
> > +
> > + input_set_abs_params(ts->input, ABS_MT_POSITION_X, 0, max_x, 0, 0);
> > + input_set_abs_params(ts->input, ABS_MT_POSITION_Y, 0, max_y, 0, 0);
> > + input_set_abs_params(ts->input, ABS_MT_PRESSURE, 0, max_p, 0, 0);
> > +
> > + input_set_abs_params(ts->input, ABS_MT_TOUCH_MAJOR, 0, MAX_AREA, 0, 0);
> > + input_set_abs_params(ts->input, ABS_MT_TOUCH_MINOR, 0, MAX_AREA, 0, 0);
> > +
> > + rc = input_register_device(ts->input);
> > + if (rc < 0)
> > + dev_err(dev, "Error, failed register input device r=%d\n", rc);
> > +
> > + return rc;
> > +}
> > +
> > +
>
> [snip]
>
> > +static int cyttsp5_get_hid_descriptor(struct cyttsp5 *ts,
> > + struct cyttsp5_hid_desc *desc)
> > +{
> > + struct device *dev = ts->dev;
> > + __le16 hid_desc_register = HID_DESC_REG;
> > + int rc;
> > + u8 cmd[2];
> > +
> > + /* Read HID descriptor length and version */
> > + mutex_lock(&ts->system_lock);
> > + ts->hid_cmd_state = HID_CMD_BUSY;
> > + mutex_unlock(&ts->system_lock);
> > +
> > + /* Set HID descriptor register */
> > + memcpy(cmd, &hid_desc_register, sizeof(hid_desc_register));
> > +
> > + rc = cyttsp5_write(ts, HID_DESC_REG, NULL, 0);
> > + if (rc < 0) {
> > + dev_err(dev, "Failed to get HID descriptor, rc=%d\n", rc);
> > + goto error;
> > + }
> > +
> > + rc = wait_event_timeout(ts->wait_q, (ts->hid_cmd_state == HID_CMD_DONE),
> > + msecs_to_jiffies(CY_HID_GET_HID_DESCRIPTOR_TIMEOUT));
> > + if (!rc) {
> > + dev_err(ts->dev, "HID get descriptor timed out\n");
> > + rc = -ETIME;
> > + goto error;
> > + }
> > +
> > + memcpy(desc, ts->response_buf, sizeof(struct cyttsp5_hid_desc));
> > +
> > + /* Check HID descriptor length and version */
> > + if (le16_to_cpu(desc->hid_desc_len) != sizeof(*desc) ||
> > + le16_to_cpu(desc->bcd_version) != HID_VERSION) {
> > + dev_err(dev, "Unsupported HID version\n");
> > + return -ENODEV;
>
> Maybe it is supposed to return here, but all other faults use "goto
> error".

Yep, I will use 'goto' instead of 'return' here.

>
> > + }
> > +
> > + goto exit;
> > +
> > +error:
> > + mutex_lock(&ts->system_lock);
> > + ts->hid_cmd_state = HID_CMD_DONE;
> > + mutex_unlock(&ts->system_lock);
> > +exit:
> > + return rc;
> > +}
> > +
>
> [snip]
>
> > +static int cyttsp5_probe(struct device *dev, struct regmap *regmap, int irq,
> > + const char *name)
> > +{
> > + struct cyttsp5 *ts;
> > + struct cyttsp5_sysinfo *si;
> > + int rc = 0, i;
> > +
> > + ts = devm_kzalloc(dev, sizeof(*ts), GFP_KERNEL);
> > + if (!ts)
> > + return -ENOMEM;
> > +
> > + /* Initialize device info */
> > + ts->regmap = regmap;
> > + ts->dev = dev;
> > + si = &ts->sysinfo;
> > + dev_set_drvdata(dev, ts);
> > +
> > + /* Initialize mutexes and spinlocks */
>
> No spinlocks here :-)

I forgot to remove the comment from vendor's driver, thanks :)

>
> > + mutex_init(&ts->system_lock);
> > +
> > + /* Initialize wait queue */
> > + init_waitqueue_head(&ts->wait_q);
> > +
> > + /* Reset the gpio to be in a reset state */
> > + ts->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
> > + if (IS_ERR(ts->reset_gpio)) {
> > + rc = PTR_ERR(ts->reset_gpio);
> > + dev_err(dev, "Failed to request reset gpio, error %d\n", rc);
> > + return rc;
> > + }
> > + gpiod_set_value(ts->reset_gpio, 1);
> > +
>
> [snip]
>
> > +static struct i2c_driver cyttsp5_i2c_driver = {
> > + .driver = {
> > + .name = CYTTSP5_NAME,
> > + .owner = THIS_MODULE,
> > + .of_match_table = of_match_ptr(cyttsp5_of_match),
> > + },
> > + .probe = cyttsp5_i2c_probe,
> > + .remove = cyttsp5_i2c_remove,
> > + .id_table = cyttsp5_i2c_id,
> > +};
> > +
> > +module_i2c_driver(cyttsp5_i2c_driver);
> > +
> > +MODULE_LICENSE("GPL");
>
> From linux/module.h:
>
> /*
> * The following license idents are currently accepted as indicating free
> * software modules
> *
> * "GPL" [GNU Public License v2 or later]
> * "GPL v2" [GNU Public License v2]
>

Okay, noted.

>
>
> > +MODULE_DESCRIPTION("Touchscreen driver for Cypress TrueTouch Gen 5 Product");
> > +MODULE_AUTHOR("Mylène Josserand <mylene.josserand@free-electrons.com>");
> > --
> > 2.11.0
> >
>
> Best regards
> Marcus Folkesson

Best regards,

--
Mylène Josserand, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

\
 
 \ /
  Last update: 2018-01-23 10:34    [W:0.146 / U:0.272 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site