lkml.org 
[lkml]   [2018]   [Jan]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC PATCH 8/9] ARM: dts: suniv: add initial DTSI file for suniv and F1C100s
On Sat, Jan 20, 2018 at 07:17:34AM +0800, Icenowy Zheng wrote:
> As we have the support for suniv pin controller and CCU now, add a
> initial DTSI for it.
>
> F1C100s is one product with the suniv die, which has a 32MiB co-packaged
> DDR1 DRAM chip. As there's nothing special for it, add a dummy DTSI file
> for it.
[...]
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index d0381e9caf21..b877e0bf1823 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -972,6 +972,8 @@ dtb-$(CONFIG_MACH_SUN8I) += \
> dtb-$(CONFIG_MACH_SUN9I) += \
> sun9i-a80-optimus.dtb \
> sun9i-a80-cubieboard4.dtb
> +dtb-$(CONFIG_MACH_SUNIV) += \
> + suniv-f1c100s-licheepi-nano.dtb
> dtb-$(CONFIG_ARCH_TANGO) += \
> tango4-vantage-1172.dtb
> dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += \

The hunk above should go with your patch
"[RFC PATCH 9/9] ARM: suniv: f1c100s: add device tree for Lichee Pi Nano"
instead.

--
Rask Ingemann Lambertsen

\
 
 \ /
  Last update: 2018-01-21 12:09    [W:0.090 / U:2.472 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site