lkml.org 
[lkml]   [2018]   [Jan]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v4 0/7] PCI: Add support to the Cadence PCIe controller
From
Date
Le 18/01/2018 à 23:52, Cyrille Pitchen a écrit :
> Hi all,
>
> this series of patches adds support to the Cadence PCIe controller.
> It was tested on a ARM64 platform emulated by a Palladium running the
> pci-next kernel.
>
> The host mode was tested with some PCIe devices connected to the Palladium
> through a speed-bridge. Some of those devices were a USB host controller
> and a SATA controller. The PCIe host controller was also tested with a
> second controller configured in endpoint mode and connected back to back
> to the first controller.
>
> The EndPoint Controller (EPC) driver was removed only because I didn't
> have time to take all Kishon's comments into account. However, using a
> fixed patch based on patch 7 of the v2 series + another patch fixing
> the EPF device name chosen by pci_epf_make(), I was abled to probe
> both function 0 and function 1 of the of the 2nd Cadence PCIe controller
> configured in endpoint mode (new hardware design since v2 so function 1
> is now available).
>
> Currently I'm facing 2 issues, which I didn't have enough time to
> investigate and to fix yet:
>
> 1 - when the vendor:device IDs are set to 104c:b500 for both functions,
> then I remove both devfn (echo 1 > /sys/bus/pci/devices/$BDF/remove)
> before scanning the PCI bus again (echo 1 > /sys/bus/pci/rescan),
> the PCI enumeration fails reporting that the PCI memory is exhausted.
>
> 2 - when I set the vendor:device IDs to 104c:0100 for function 0 and
> 104c:b500 and remove only function 1 before scanning the PCI bus again,
> I now pass the PCI enumeration. I also pass the 'pcitest -b <BAR>' test
> but I fail on the MSI test ('pcitest -m <MSI>').
>
> I'm still investigating on those issues.
>

Both issues fixed:

1 - For the 1st issue, I was removing endpoint devfn instead of the host
controller itself. Then when I configured and enabled the 2nd endpoint
function (endpoint side) before scanning the PCI bus again (host side),
the memory window for the PCI bridge was not resized, hence there was no
space left for BARs of the 2nd endpoint fonction.
Now that I remove the host controller itself (bus 0, dev 0, func 0)
instead of the endpoint functions, it works:
# BDF="0000:00:00.0"
# echo 1 > /sys/bus/pci/devices/$BDF/remove
# echo 1 > /sys/bus/pci/rescan

The memory window for the PCI bridge is resized as needed and the 6 BARs
of each endpoint function can successfully be allocated during the new
PCI enumeration.


2 - For the 2nd issue, I added a new parameter to
cdns_pcie_set_outbound_region() to pass the function number and now
pcitest -m [1 - 32] [-D <device>] works for both endpoint functions.


Finally, I'm able to use both endpoint functions at the same time with
pcitest. I guess I'll send v5 within few days moving the endpoint
controller driver back into the series.

Best regards,

Cyrille

> Best regards,
>
> Cyrille
>
> ChangeLog
>
> v3 -> v4:
> - split patch 3 from v3 into patches 3 and 4.
> - remove unused cdns_pcie_reset_outbound_region() from old patch 6
> (new patch 7).
> - other patches are unchanged.
>
> v2 -> v3:
>
> - rebase on today's linux-pci/next (20180110)
>
> patch1:
> - rework the commit message of patch 1 and add two new comments on why endpoint
> library users must be linked after the endpoint library itself and why
> the dwc rule uses obj-y instead of obj-$(CONFIG_PCIE_CONFIG_DW).
> - update patch 1 to add missing ifdef CONFIG_PCI / endif in
> drivers/pci/dwc/Makefile around the obj-$(CONFIG_ARM64) += pcie-hisi.o rule,
> like for the other obj-$(CONFIG_ARM64) rules in drivers/pci/host/Makefile.
>
> patch2: unchanged
>
> patch3:
> - update patch 3 so the bridge hooks/members initialization is left to the
> host bridges probe routines.
>
> patch4: unchanged
>
> patch5:
> - collect 'Reviewed-by' tag from Rob Herring for the DT bindings.
>
> patch6:
> - remove explanation in the commit message on why obj-$(CONFIG_PCIE_CANDENCE) is
> placed after obj-$(CONFIG_PCI_ENDPOINT) in drivers/pci/Makefile since a
> comment on it has been added into patch1.
> - remove menuconfig PCI_CADENCE in drivers/pci/cadence/Kconfig to match
> drivers/pci/dwc/Kconfig.
> - adapt patch6 to the changes done in patch3 for the pci_host_probe() function.
>
> v1 -> v2:
> - add new properties in the device-tree bindings: 'cdns,max-outbound-regions'
> and 'cdns,no-bar-match-nbits'.
> - add a new patch to regroup all makefile rules in drivers/pci/Makefile, hence
> cleaning drivers/Makefile up.
> - change the license text to use the recommanded format:
> // SPDX-License-Identifier: GPL-2.0
> - add a new patch updating the API of the EPC library to add support to
> multi-function devices.
> - add a 2 new patches to share more common code between host controller drivers
> - remove some useless tests
> - add more comments in both drivers.
> - fix DT bindings examples
> - remove useless init of the primary, secondary and sub-ordinate bus numbers in
> the PCI configuration space of the root port.
> - remove cdns_pcie_ep_stop() function and rework cdns_pcie_ep_start() function
>
> Cyrille Pitchen (6):
> PCI: Regroup all PCI related entries into drivers/pci/Makefile
> PCI: OF: Add generic function to parse and allocate PCI resources
> PCI: generic: fix missing call of pci_free_resource_list()
> PCI: Add generic function to probe PCI host controllers
> PCI: Add vendor ID for Cadence
> PCI: cadence: Add host driver for Cadence PCIe controller
>
> Scott Telford (1):
> dt-bindings: PCI: cadence: Add DT bindings for Cadence PCIe host
> controller
>
> .../bindings/pci/cdns,cdns-pcie-host.txt | 60 ++++
> MAINTAINERS | 7 +
> drivers/Makefile | 5 +-
> drivers/pci/Kconfig | 2 +
> drivers/pci/Makefile | 14 +-
> drivers/pci/cadence/Kconfig | 16 +
> drivers/pci/cadence/Makefile | 3 +
> drivers/pci/cadence/pcie-cadence-host.c | 336 +++++++++++++++++++++
> drivers/pci/cadence/pcie-cadence.c | 56 ++++
> drivers/pci/cadence/pcie-cadence.h | 194 ++++++++++++
> drivers/pci/dwc/Makefile | 2 +
> drivers/pci/host/Makefile | 2 +
> drivers/pci/host/pci-host-common.c | 72 +----
> drivers/pci/of.c | 51 ++++
> drivers/pci/probe.c | 33 ++
> include/linux/pci.h | 10 +
> include/linux/pci_ids.h | 2 +
> 17 files changed, 790 insertions(+), 75 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.txt
> create mode 100644 drivers/pci/cadence/Kconfig
> create mode 100644 drivers/pci/cadence/Makefile
> create mode 100644 drivers/pci/cadence/pcie-cadence-host.c
> create mode 100644 drivers/pci/cadence/pcie-cadence.c
> create mode 100644 drivers/pci/cadence/pcie-cadence.h
>


--
Cyrille Pitchen, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

\
 
 \ /
  Last update: 2018-01-21 19:12    [W:0.049 / U:4.760 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site