Messages in this thread Patch in this message | | | From | Giulio Benetti <> | Subject | [PATCH 2/2] drm/sun4i: Handle DRM_MODE_FLAG_**SYNC_POSITIVE correctly | Date | Sat, 20 Jan 2018 19:50:21 +0100 |
| |
On previous handling, if specified DRM_MODE_FLAG_N*SYNC, it was ignored, because only PHSYNC and PVSYNC were taken into account. DRM_MODE_FLAG_P*SYNC and DRM_MODE_FLAG_N*SYNC are not exclusive.
If flags contains PVSYNC, it doesn't mean it is NVSYNC. And it's true also the contrary. Also, as I've checked with scope on A20, if (flags & PVSYNC) then SUN4I_TCON0_IO_POL_VSYNC_POSITIVE must be set, as name suggests. It seems all display io polarities starts inverted if 0.
Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
PVSYNC and PHSYNC only
Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com> --- drivers/gpu/drm/sun4i/sun4i_tcon.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c index 6121210..e873a37 100644 --- a/drivers/gpu/drm/sun4i/sun4i_tcon.c +++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c @@ -224,10 +224,10 @@ static void sun4i_tcon0_mode_set_rgb(struct sun4i_tcon *tcon, SUN4I_TCON0_BASIC3_H_SYNC(hsync)); /* Setup the polarity of the various signals */ - if (!(mode->flags & DRM_MODE_FLAG_PHSYNC)) + if (mode->flags & DRM_MODE_FLAG_PHSYNC) val |= SUN4I_TCON0_IO_POL_HSYNC_POSITIVE; - if (!(mode->flags & DRM_MODE_FLAG_PVSYNC)) + if (mode->flags & DRM_MODE_FLAG_PVSYNC) val |= SUN4I_TCON0_IO_POL_VSYNC_POSITIVE; if(display_info.bus_flags & DRM_BUS_FLAG_PIXDATA_POSEDGE) -- 2.7.4
| |