lkml.org 
[lkml]   [2018]   [Jan]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 1/2] ARM: dts: imx6ul: add 696MHz operating point
Hi Anson,

On Tue, Jan 2, 2018 at 3:07 PM, Anson Huang <Anson.Huang@nxp.com> wrote:
> Add 696MHz operating point according to datasheet
> (Rev. 0, 12/2015).

There is a newer version from 05/2017:
https://www.nxp.com/docs/en/data-sheet/IMX6ULAEC.pdf

>
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
> ---
> arch/arm/boot/dts/imx6ul.dtsi | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi
> index e0b4a46..86b3251 100644
> --- a/arch/arm/boot/dts/imx6ul.dtsi
> +++ b/arch/arm/boot/dts/imx6ul.dtsi
> @@ -68,12 +68,14 @@
> clock-latency = <61036>; /* two CLK32 periods */
> operating-points = <
> /* kHz uV */
> + 696000 1275000
> 528000 1175000
> 396000 1025000
> 198000 950000
> >;
> fsl,soc-operating-points = <
> /* KHz uV */
> + 696000 1275000

Why 1.275V?

According to the datasheet, the minimum value for VDD_SOC_CAP is 1.15V
for all frequencies.

Adding 25mV of margin leads to 1.175V.

\
 
 \ /
  Last update: 2018-01-02 16:03    [W:0.161 / U:6.560 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site