lkml.org 
[lkml]   [2018]   [Jan]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 1/2] Revert "Bluetooth: btusb: fix QCA Rome suspend/resume"
From
Date


> On 21 Dec 2017, at 7:43 PM, Daniel Drake <drake@endlessm.com> wrote:
>
> On Wed, Dec 20, 2017 at 6:53 PM, Brian Norris <briannorris@chromium.org> wrote:
>>
>> On Wed, Dec 20, 2017 at 07:00:07PM +0800, Kai-Heng Feng wrote:
>>> This commit causes a regression on some QCA ROME chips. The USB device
>>> reset happens in btusb_open(), hence firmware loading gets interrupted.
>>
>> Oh, did you really confirm that's the root of the problem? I was only
>> hypothesizing, with some informed observation and code review; but I
>> didn't fully convince myself. If so, that's interesting.
>
> I have the same doubt. Can you explain how/why firmware uploading and
> btusb_open() overlap, and how this is avoided with your patch?

QCA ROME chip uploads its firmware inside btusb_open().

The behavior is like below:
- btusb_probe()
- btusb_open()
- btusb_suspend(), reset_resume gets set.
- btusb_open() again, hub resets the device, then the issue happens.

I didn’t dig really deep for the issue, I simply tried usb core quirks, it reset
the USB device before btusb_probe().

It might be that using the USB quirk only papers over the real issue.

> If they do overlap, is that not a bug in the stack that should be fixed instead?
> If the fix belongs in btusb and this BTUSB_RESET_RESUME thing really
> is problematic, should it be totally removed instead?

I think so. That’s why I need some insight from the original patch author.

Kai-Heng

>
> Daniel

\
 
 \ /
  Last update: 2018-01-02 11:07    [W:0.066 / U:24.544 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site