lkml.org 
[lkml]   [2018]   [Jan]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH arm/aspeed/ast2500 v1] ipmi: add an Aspeed KCS IPMI BMC driver
From
Date
On 01/16/2018 02:59 PM, Corey Minyard wrote:
> On 01/16/2018 05:43 AM, Haiyue Wang wrote:
>> The KCS (Keyboard Controller Style) interface is used to perform in-band
>> IPMI communication between a server host and its BMC (BaseBoard
>> Management
>> Controllers).
>>
>> This driver exposes the KCS interface on ASpeed SOCs (AST2400 and
>> AST2500)
>> as a character device. Such SOCs are commonly used as BMCs and this
>> driver
>> implements the BMC side of the KCS interface.
>
> I thought we were going to unify the BMC ioctl interface?  My
> preference would be to
> create a file named include/uapi/linux/ipmi-bmc.h and add the following:
>
> #define __IPMI_BMC_IOCTL_MAGIC    0xb1
> #define IPMI_BMC_IOCTL_SMS_SET_ATN    _IO(__IPMI_BMC_IOCTL_MAGIC, 0x00)
>
> to make it the same as BT.  Then in bt-bmc.h, set BT_BMC_IOCTL_SMS_ATN to
> IPMI_BMC_IOCTL_SMS_SET_ATN.  Then add the KCS ioctls in ipmi-bmc.h and
> use that.  That way we stay backward compatible but we are unified.
>
> Since more KCS interfaces may come around, can you make the name more
> specific?  (I made this same error on bt-bmc,c, it should probably be
> renamed.)
>
> More comments inline, as I'll go ahead and review this.
>
>> Signed-off-by: Haiyue Wang <haiyue.wang@linux.intel.com>
>> ---
>>   .../devicetree/bindings/ipmi/aspeed-kcs-bmc.txt    |  26 +
>>   drivers/char/ipmi/Kconfig                          |   9 +
>>   drivers/char/ipmi/Makefile                         |   1 +
>>   drivers/char/ipmi/kcs-bmc.c                        | 744
>> +++++++++++++++++++++
>>   include/uapi/linux/kcs-bmc.h                       |  14 +
>>   5 files changed, 794 insertions(+)
>>   create mode 100644
>> Documentation/devicetree/bindings/ipmi/aspeed-kcs-bmc.txt
>>   create mode 100644 drivers/char/ipmi/kcs-bmc.c
>>   create mode 100644 include/uapi/linux/kcs-bmc.h
>>
>> diff --git
>> a/Documentation/devicetree/bindings/ipmi/aspeed-kcs-bmc.txt
>> b/Documentation/devicetree/bindings/ipmi/aspeed-kcs-bmc.txt
>> new file mode 100644
>> index 0000000..dd0c73d
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/ipmi/aspeed-kcs-bmc.txt
>> @@ -0,0 +1,26 @@
>> +* Aspeed KCS (Keyboard Controller Style) IPMI interface
>> +
>> +The Aspeed SOCs (AST2400 and AST2500) are commonly used as BMCs
>> +(BaseBoard Management Controllers) and the KCS interface can be
>> +used to perform in-band IPMI communication with their host.
>> +
>> +Required properties:
>> +- compatible : should be one of
>> +    "aspeed,ast2400-kcs-bmc"
>> +    "aspeed,ast2500-kcs-bmc"
>> +- interrupts : interrupt generated by the controller
>> +- kcs_chan : The LPC channel number in the controller
>> +- kcs_addr : The host CPU IO map address
>> +
>> +
>> +Example:
>> +
>> +    kcs3: kcs3@0 {
>> +        compatible = "aspeed,ast2500-kcs-bmc";
>> +        reg = <0x0 0x80>;
>> +        interrupts = <8>;
>> +        kcs_chan = <3>;
>> +        kcs_addr = <0xCA2>;
>> +        status = "okay";
>> +    };
>> +
>> diff --git a/drivers/char/ipmi/Kconfig b/drivers/char/ipmi/Kconfig
>> index 3544abc..36132f8 100644
>> --- a/drivers/char/ipmi/Kconfig
>> +++ b/drivers/char/ipmi/Kconfig
>> @@ -104,3 +104,12 @@ config ASPEED_BT_IPMI_BMC
>>         Provides a driver for the BT (Block Transfer) IPMI interface
>>         found on Aspeed SOCs (AST2400 and AST2500). The driver
>>         implements the BMC side of the BT interface.
>> +
>> +config ASPEED_KCS_IPMI_BMC
>> +    depends on ARCH_ASPEED || COMPILE_TEST
>> +    select REGMAP_MMIO
>> +    tristate "KCS IPMI bmc driver"
>> +    help
>> +      Provides a driver for the KCS (Keyboard Controller Style) IPMI
>> +      interface found on Aspeed SOCs (AST2400 and AST2500). The driver
>> +      implements the BMC side of the KCS interface.
>> \ No newline at end of file
>> diff --git a/drivers/char/ipmi/Makefile b/drivers/char/ipmi/Makefile
>> index 33b899f..f217bae 100644
>> --- a/drivers/char/ipmi/Makefile
>> +++ b/drivers/char/ipmi/Makefile
>> @@ -22,3 +22,4 @@ obj-$(CONFIG_IPMI_POWERNV) += ipmi_powernv.o
>>   obj-$(CONFIG_IPMI_WATCHDOG) += ipmi_watchdog.o
>>   obj-$(CONFIG_IPMI_POWEROFF) += ipmi_poweroff.o
>>   obj-$(CONFIG_ASPEED_BT_IPMI_BMC) += bt-bmc.o
>> +obj-$(CONFIG_ASPEED_KCS_IPMI_BMC) += kcs-bmc.o
>> \ No newline at end of file
>> diff --git a/drivers/char/ipmi/kcs-bmc.c b/drivers/char/ipmi/kcs-bmc.c
>> new file mode 100644
>> index 0000000..d6eab0b
>> --- /dev/null
>> +++ b/drivers/char/ipmi/kcs-bmc.c
>> @@ -0,0 +1,744 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +// Copyright (c) 2015-2018, Intel Corporation.
>> +
>> +#include <linux/atomic.h>
>> +#include <linux/errno.h>
>> +#include <linux/interrupt.h>
>> +#include <linux/io.h>
>> +#include <linux/kcs-bmc.h>
>> +#include <linux/mfd/syscon.h>
>> +#include <linux/miscdevice.h>
>> +#include <linux/module.h>
>> +#include <linux/of.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/poll.h>
>> +#include <linux/regmap.h>
>> +#include <linux/sched.h>
>> +#include <linux/slab.h>
>> +#include <linux/timer.h>
>> +
>> +#define KCS_MSG_BUFSIZ      1024
>> +#define KCS_CHANNEL_MAX     4
>> +
>> +/*
>> + * This is a BMC device used to communicate to the host
>> + */
>> +#define DEVICE_NAME     "ipmi-kcs-host"
>> +
>> +
>> +/* Different Phases of the KCS Module */
>> +#define KCS_PHASE_IDLE          0x00
>> +#define KCS_PHASE_WRITE         0x01
>> +#define KCS_PHASE_WRITE_END     0x02
>> +#define KCS_PHASE_READ          0x03
>> +#define KCS_PHASE_ABORT         0x04
>> +#define KCS_PHASE_ERROR         0x05
>
> It would be nicer to make the above an enum.
>
>> +
>> +/* Abort Phase */
>> +#define ABORT_PHASE_ERROR1      0x01
>> +#define ABORT_PHASE_ERROR2      0x02
>
> Can the above just be folded into two separate phases in kcs_phase?
> That would be a little cleaner.
>
>
>> +
>> +/* KCS Command Control codes. */
>> +#define KCS_GET_STATUS          0x60
>> +#define KCS_ABORT               0x60
>> +#define KCS_WRITE_START         0x61
>> +#define KCS_WRITE_END           0x62
>> +#define KCS_READ_BYTE           0x68
>> +
>> +/* Status bits.:
>> + * - IDLE_STATE.  Interface is idle. System software should not be
>> expecting
>> + *                nor sending any data.
>> + * - READ_STATE.  BMC is transferring a packet to system software.
>> System
>> + *                software should be in the "Read Message" state.
>> + * - WRITE_STATE. BMC is receiving a packet from system software.
>> System
>> + *                software should be writing a command to the BMC.
>> + * - ERROR_STATE. BMC has detected a protocol violation at the
>> interface level,
>> + *                or the transfer has been aborted. System software
>> can either
>> + *                use the "Get_Status" control code to request the
>> nature of
>> + *                the error, or it can just retry the command.
>> + */
>> +#define KCS_IDLE_STATE           0
>> +#define KCS_READ_STATE           1
>> +#define KCS_WRITE_STATE          2
>> +#define KCS_ERROR_STATE          3
>> +
>> +/* KCS Error Codes */
>> +#define KCS_NO_ERROR                0x00
>> +#define KCS_ABORTED_BY_COMMAND      0x01
>> +#define KCS_ILLEGAL_CONTROL_CODE    0x02
>> +#define KCS_LENGTH_ERROR            0x06
>> +#define KCS_UNSPECIFIED_ERROR       0xFF
>> +
>> +
>> +#define KCS_ZERO_DATA           0
>> +
>> +/* IPMI 2.0 - Table 9-1, KCS Interface Status Register Bits */
>> +#define KCS_STR_STATE(state)        (state << 6)
>> +#define KCS_STR_STATE_MASK          KCS_STR_STATE(0x3)
>> +#define KCS_STR_CMD_DAT             BIT(3)
>> +#define KCS_STR_SMS_ATN             BIT(2)
>> +#define KCS_STR_IBF                 BIT(1)
>> +#define KCS_STR_OBF                 BIT(0)
>> +
>> +
>> +/* mapped to lpc-bmc@0 IO space */
>> +#define LPC_HICR0            0x000
>> +#define     LPC_HICR0_LPC3E          BIT(7)
>> +#define     LPC_HICR0_LPC2E          BIT(6)
>> +#define     LPC_HICR0_LPC1E          BIT(5)
>> +#define LPC_HICR2            0x008
>> +#define     LPC_HICR2_IBFIF3         BIT(3)
>> +#define     LPC_HICR2_IBFIF2         BIT(2)
>> +#define     LPC_HICR2_IBFIF1         BIT(1)
>> +#define LPC_HICR4            0x010
>> +#define     LPC_HICR4_LADR12AS       BIT(7)
>> +#define     LPC_HICR4_KCSENBL        BIT(2)
>> +#define LPC_LADR3H           0x014
>> +#define LPC_LADR3L           0x018
>> +#define LPC_LADR12H          0x01C
>> +#define LPC_LADR12L          0x020
>> +#define LPC_IDR1             0x024
>> +#define LPC_IDR2             0x028
>> +#define LPC_IDR3             0x02C
>> +#define LPC_ODR1             0x030
>> +#define LPC_ODR2             0x034
>> +#define LPC_ODR3             0x038
>> +#define LPC_STR1             0x03C
>> +#define LPC_STR2             0x040
>> +#define LPC_STR3             0x044
>> +
>> +/* mapped to lpc-host@80 IO space */
>> +#define LPC_HICRB            0x080
>> +#define     LPC_HICRB_IBFIF4         BIT(1)
>> +#define     LPC_HICRB_LPC4E          BIT(0)
>> +#define LPC_LADR4            0x090
>> +#define LPC_IDR4             0x094
>> +#define LPC_ODR4             0x098
>> +#define LPC_STR4             0x09C
>> +
>> +
>> +/* IPMI 2.0 - 9.5, KCS Interface Registers */
>> +struct kcs_ioreg {
>> +    u32 idr; /* Input Data Register */
>> +    u32 odr; /* Output Data Register */
>> +    u32 str; /* Status Register */
>> +};
>> +
>> +static const struct kcs_ioreg kcs_ioreg_map[KCS_CHANNEL_MAX] = {
>> +    { .idr = LPC_IDR1, .odr = LPC_ODR1, .str = LPC_STR1 },
>> +    { .idr = LPC_IDR2, .odr = LPC_ODR2, .str = LPC_STR2 },
>> +    { .idr = LPC_IDR3, .odr = LPC_ODR3, .str = LPC_STR3 },
>> +    { .idr = LPC_IDR4, .odr = LPC_ODR4, .str = LPC_STR4 },
>> +};

One more thing...  Why aren't the above values being set in the device tree?
Passing in a channel (and address) seems inflexible.  Kind of goes
against the
philosophy of device trees.

-corey

>>
>> +
>> +struct kcs_bmc {
>> +    struct regmap *map;
>> +    spinlock_t     lock;
>
> This lock is only used in threads, as far as I can tell.  Couldn't it
> just be a normal mutex?
> But more on this later.
>
>> +
>> +    u32 chan;
>> +    int running;
>> +
>> +    u32 idr;
>> +    u32 odr;
>> +    u32 str;
>> +
>> +    int kcs_phase;
>> +    u8  abort_phase;
>> +    u8  kcs_error;
>> +
>> +    wait_queue_head_t queue;
>> +    int  data_in_avail;
>
> data_in_avail should be a bool.
>
> You set data_in_avail after the data is ready, but you don't have a
> barrier.  You
> have similar problems with kcs_phase.
>
> In fact, the locking in the driver doesn't seem quite correct.  If
> this ever ran on
> an SMP system, it is likely to not work correctly.  You can assume
> that the interrupt
> runs exclusively, but you cannot assume that the data operations are
> available in
> order on another processor that handles a subsequent interrupt.
>
> The easiest way to fix this would be to add the spin lock around the
> case statement
> in the irq handler and add them in the poll and read functions (you
> would need to
> leave it as a spinlock in that case).  That would provide the proper
> barriers assuming
> you put them in the right place (checking data_in_avail again inside
> the spinlock
> in the read case, for instance).
>
>> +    int  data_in_idx;
>> +    u8  *data_in;
>> +
>> +    int  data_out_idx;
>> +    int  data_out_len;
>> +    u8  *data_out;
>> +
>> +    struct miscdevice miscdev;
>> +};
>> +
>> +static u8 kcs_inb(struct kcs_bmc *kcs_bmc, u32 reg)
>> +{
>> +    u32 val = 0;
>> +    int rc;
>> +
>> +    rc = regmap_read(kcs_bmc->map, reg, &val);
>> +    WARN(rc != 0, "regmap_read() failed: %d\n", rc);
>> +
>> +    return rc == 0 ? (u8) val : 0;
>> +}
>> +
>> +static void kcs_outb(struct kcs_bmc *kcs_bmc, u8 data, u32 reg)
>> +{
>> +    int rc;
>> +
>> +    rc = regmap_write(kcs_bmc->map, reg, data);
>> +    WARN(rc != 0, "regmap_write() failed: %d\n", rc);
>> +}
>> +
>> +static inline void kcs_set_state(struct kcs_bmc *kcs_bmc, u8 state)
>> +{
>> +    regmap_update_bits(kcs_bmc->map, kcs_bmc->str, KCS_STR_STATE_MASK,
>> +            KCS_STR_STATE(state));
>> +}
>> +
>> +static inline void kcs_set_atn(struct kcs_bmc *kcs_bmc)
>> +{
>> +    regmap_update_bits(kcs_bmc->map, kcs_bmc->str, KCS_STR_SMS_ATN,
>> +            KCS_STR_SMS_ATN);
>> +}
>> +
>> +static inline void kcs_clear_atn(struct kcs_bmc *kcs_bmc)
>> +{
>> +    regmap_update_bits(kcs_bmc->map, kcs_bmc->str, KCS_STR_SMS_ATN,
>> +            0);
>> +}
>> +
>> +/*
>> + * AST_usrGuide_KCS.pdf
>> + * 2. Background:
>> + *   we note D for Data, and C for Cmd/Status, default rules are
>> + *     A. KCS1 / KCS2 ( D / C:X / X+4 )
>> + *        D / C : CA0h / CA4h
>> + *        D / C : CA8h / CACh
>> + *     B. KCS3 ( D / C:XX2h / XX3h )
>> + *        D / C : CA2h / CA3h
>> + *        D / C : CB2h / CB3h
>> + *     C. KCS4
>> + *        D / C : CA4h / CA5h
>> + */
>> +static void kcs_set_addr(struct kcs_bmc *kcs_bmc, u16 addr)
>> +{
>> +    switch (kcs_bmc->chan) {
>> +    case 1:
>> +        regmap_update_bits(kcs_bmc->map, LPC_HICR4,
>> +                LPC_HICR4_LADR12AS, 0);
>> +        regmap_write(kcs_bmc->map, LPC_LADR12H, addr >> 8);
>> +        regmap_write(kcs_bmc->map, LPC_LADR12L, addr & 0xFF);
>> +        break;
>> +
>> +    case 2:
>> +        regmap_update_bits(kcs_bmc->map, LPC_HICR4,
>> +                LPC_HICR4_LADR12AS, LPC_HICR4_LADR12AS);
>> +        regmap_write(kcs_bmc->map, LPC_LADR12H, addr >> 8);
>> +        regmap_write(kcs_bmc->map, LPC_LADR12L, addr & 0xFF);
>> +        break;
>> +
>> +    case 3:
>> +        regmap_write(kcs_bmc->map, LPC_LADR3H, addr >> 8);
>> +        regmap_write(kcs_bmc->map, LPC_LADR3L, addr & 0xFF);
>> +        break;
>> +
>> +    case 4:
>> +        regmap_write(kcs_bmc->map, LPC_LADR4, ((addr + 1) << 16) |
>> +            addr);
>> +        break;
>> +
>> +    default:
>
> Shouldn't you return an error here?
>
>> +        break;
>> +    }
>> +}
>> +
>> +static void kcs_enable_channel(struct kcs_bmc *kcs_bmc, int enable)
>> +{
>> +    switch (kcs_bmc->chan) {
>> +    case 1:
>> +        if (enable) {
>> +            regmap_update_bits(kcs_bmc->map, LPC_HICR2,
>> +                    LPC_HICR2_IBFIF1, LPC_HICR2_IBFIF1);
>> +            regmap_update_bits(kcs_bmc->map, LPC_HICR0,
>> +                    LPC_HICR0_LPC1E, LPC_HICR0_LPC1E);
>> +        } else {
>> +            regmap_update_bits(kcs_bmc->map, LPC_HICR0,
>> +                    LPC_HICR0_LPC1E, 0);
>> +            regmap_update_bits(kcs_bmc->map, LPC_HICR2,
>> +                    LPC_HICR2_IBFIF1, 0);
>> +        }
>> +        break;
>> +
>> +    case 2:
>> +        if (enable) {
>> +            regmap_update_bits(kcs_bmc->map, LPC_HICR2,
>> +                    LPC_HICR2_IBFIF2, LPC_HICR2_IBFIF2);
>> +            regmap_update_bits(kcs_bmc->map, LPC_HICR0,
>> +                    LPC_HICR0_LPC2E, LPC_HICR0_LPC2E);
>> +        } else {
>> +            regmap_update_bits(kcs_bmc->map, LPC_HICR0,
>> +                    LPC_HICR0_LPC2E, 0);
>> +            regmap_update_bits(kcs_bmc->map, LPC_HICR2,
>> +                    LPC_HICR2_IBFIF2, 0);
>> +        }
>> +        break;
>> +
>> +    case 3:
>> +        if (enable) {
>> +            regmap_update_bits(kcs_bmc->map, LPC_HICR2,
>> +                    LPC_HICR2_IBFIF3, LPC_HICR2_IBFIF3);
>> +            regmap_update_bits(kcs_bmc->map, LPC_HICR0,
>> +                    LPC_HICR0_LPC3E, LPC_HICR0_LPC3E);
>> +            regmap_update_bits(kcs_bmc->map, LPC_HICR4,
>> +                    LPC_HICR4_KCSENBL, LPC_HICR4_KCSENBL);
>> +        } else {
>> +            regmap_update_bits(kcs_bmc->map, LPC_HICR0,
>> +                    LPC_HICR0_LPC3E, 0);
>> +            regmap_update_bits(kcs_bmc->map, LPC_HICR4,
>> +                    LPC_HICR4_KCSENBL, 0);
>> +            regmap_update_bits(kcs_bmc->map, LPC_HICR2,
>> +                    LPC_HICR2_IBFIF3, 0);
>> +        }
>> +        break;
>> +
>> +    case 4:
>> +        if (enable) {
>> +            regmap_update_bits(kcs_bmc->map, LPC_HICRB,
>> +                    LPC_HICRB_IBFIF4 | LPC_HICRB_LPC4E,
>> +                    LPC_HICRB_IBFIF4 | LPC_HICRB_LPC4E);
>> +        } else {
>> +            regmap_update_bits(kcs_bmc->map, LPC_HICRB,
>> +                    LPC_HICRB_IBFIF4 | LPC_HICRB_LPC4E,
>> +                    0);
>> +        }
>
> The above shouldn't have {}, did you run this through checkpatch?
>
>> +        break;
>> +
>> +    default:
>
> Error here, too?
>
>> +        break;
>> +    }
>> +}
>> +
>> +static void kcs_rx_data(struct kcs_bmc *kcs_bmc)
>> +{
>> +    u8 data;
>> +
>> +    switch (kcs_bmc->kcs_phase) {
>> +    case KCS_PHASE_WRITE:
>> +        kcs_set_state(kcs_bmc, KCS_WRITE_STATE);
>> +
>> +        /* set OBF before reading data */
>> +        kcs_outb(kcs_bmc, KCS_ZERO_DATA, kcs_bmc->odr);
>> +
>> +        if (kcs_bmc->data_in_idx < KCS_MSG_BUFSIZ)
>> +            kcs_bmc->data_in[kcs_bmc->data_in_idx++] =
>> +                    kcs_inb(kcs_bmc, kcs_bmc->idr);
>> +        break;
>> +
>> +    case KCS_PHASE_WRITE_END:
>> +        kcs_set_state(kcs_bmc, KCS_READ_STATE);
>> +
>> +        if (kcs_bmc->data_in_idx < KCS_MSG_BUFSIZ)
>> +            kcs_bmc->data_in[kcs_bmc->data_in_idx++] =
>> +                    kcs_inb(kcs_bmc, kcs_bmc->idr);
>> +
>> +        kcs_bmc->kcs_phase = KCS_PHASE_READ;
>> +        if (kcs_bmc->running) {
>> +            kcs_bmc->data_in_avail = 1;
>> +            wake_up_interruptible(&kcs_bmc->queue);
>> +        }
>> +        break;
>> +
>> +    case KCS_PHASE_READ:
>> +        if (kcs_bmc->data_out_idx == kcs_bmc->data_out_len)
>> +            kcs_set_state(kcs_bmc, KCS_IDLE_STATE);
>> +
>> +        data = kcs_inb(kcs_bmc, kcs_bmc->idr);
>> +        if (data != KCS_READ_BYTE) {
>> +            kcs_set_state(kcs_bmc, KCS_ERROR_STATE);
>> +            kcs_outb(kcs_bmc, KCS_ZERO_DATA, kcs_bmc->odr);
>> +            break;
>> +        }
>> +
>> +        if (kcs_bmc->data_out_idx == kcs_bmc->data_out_len) {
>> +            kcs_outb(kcs_bmc, KCS_ZERO_DATA, kcs_bmc->odr);
>> +            kcs_bmc->kcs_phase = KCS_PHASE_IDLE;
>> +            break;
>> +        }
>> +
>> +        kcs_outb(kcs_bmc, kcs_bmc->data_out[kcs_bmc->data_out_idx++],
>> +                 kcs_bmc->odr);
>> +        break;
>> +
>> +    case KCS_PHASE_ABORT:
>> +        switch (kcs_bmc->abort_phase) {
>> +        case ABORT_PHASE_ERROR1:
>> +            kcs_set_state(kcs_bmc, KCS_READ_STATE);
>> +
>> +            /* Read the Dummy byte */
>> +            kcs_inb(kcs_bmc, kcs_bmc->idr);
>> +
>> +            kcs_outb(kcs_bmc, kcs_bmc->kcs_error, kcs_bmc->odr);
>> +            kcs_bmc->abort_phase = ABORT_PHASE_ERROR2;
>> +            break;
>> +
>> +        case ABORT_PHASE_ERROR2:
>> +            kcs_set_state(kcs_bmc, KCS_IDLE_STATE);
>> +
>> +            /* Read the Dummy byte */
>> +            kcs_inb(kcs_bmc, kcs_bmc->idr);
>> +
>> +            kcs_outb(kcs_bmc, KCS_ZERO_DATA, kcs_bmc->odr);
>> +            kcs_bmc->kcs_phase = KCS_PHASE_IDLE;
>> +            kcs_bmc->abort_phase = 0;
>> +            break;
>> +
>> +        default:
>> +            break;
>> +        }
>> +
>> +        break;
>> +
>> +    case KCS_PHASE_ERROR:
>
> This is identical to the default.  And the default should never
> happen, anyway.
> If the default happens you have a software bug and need to report it.
>
>> +        kcs_set_state(kcs_bmc, KCS_ERROR_STATE);
>> +
>> +        /* Read the Dummy byte */
>> +        kcs_inb(kcs_bmc, kcs_bmc->idr);
>> +
>> +        kcs_outb(kcs_bmc, KCS_ZERO_DATA, kcs_bmc->odr);
>> +        break;
>> +
>> +    default:
>> +        kcs_set_state(kcs_bmc, KCS_ERROR_STATE);
>> +
>> +        /* Read the Dummy byte */
>> +        kcs_inb(kcs_bmc, kcs_bmc->idr);
>> +
>> +        kcs_outb(kcs_bmc, KCS_ZERO_DATA, kcs_bmc->odr);
>> +        break;
>> +    }
>> +}
>> +
>> +static void kcs_rx_cmd(struct kcs_bmc *kcs_bmc)
>> +{
>> +    u8 cmd;
>> +
>> +    kcs_set_state(kcs_bmc, KCS_WRITE_STATE);
>> +
>> +    /* Dummy data to generate OBF */
>> +    kcs_outb(kcs_bmc, KCS_ZERO_DATA, kcs_bmc->odr);
>> +
>> +    cmd = kcs_inb(kcs_bmc, kcs_bmc->idr);
>
> Wouldn't you want to read the command before you write the OBF?
>
>> +    switch (cmd) {
>> +    case KCS_WRITE_START:
>> +        kcs_bmc->data_in_avail = 0;
>> +        kcs_bmc->data_in_idx   = 0;
>> +        kcs_bmc->kcs_phase     = KCS_PHASE_WRITE;
>> +        kcs_bmc->kcs_error     = KCS_NO_ERROR;
>> +        break;
>> +
>> +    case KCS_WRITE_END:
>> +        kcs_bmc->kcs_phase = KCS_PHASE_WRITE_END;
>> +        break;
>> +
>> +    case KCS_ABORT:
>> +        if (kcs_bmc->kcs_error == KCS_NO_ERROR)
>> +            kcs_bmc->kcs_error = KCS_ABORTED_BY_COMMAND;
>> +
>> +        kcs_bmc->kcs_phase   = KCS_PHASE_ABORT;
>> +        kcs_bmc->abort_phase = ABORT_PHASE_ERROR1;
>> +        break;
>> +
>> +    default:
>> +        kcs_bmc->kcs_error = KCS_ILLEGAL_CONTROL_CODE;
>> +        kcs_set_state(kcs_bmc, KCS_ERROR_STATE);
>> +        kcs_outb(kcs_bmc, kcs_bmc->kcs_error, kcs_bmc->odr);
>> +        kcs_bmc->kcs_phase = KCS_PHASE_ERROR;
>> +        break;
>> +    }
>> +}
>> +
>> +/*
>> + * Whenever the BMC is reset (from power-on or a hard reset), the
>> State Bits
>> + * are initialized to "11 - Error State". Doing so allows SMS to
>> detect that
>> + * the BMC has been reset and that any message in process has been
>> terminated
>> + * by the BMC.
>> + */
>> +static void kcs_force_abort(struct kcs_bmc *kcs_bmc)
>> +{
>> +    unsigned long flags;
>> +
>> +    spin_lock_irqsave(&kcs_bmc->lock, flags);
>> +    kcs_set_state(kcs_bmc, KCS_ERROR_STATE);
>> +
>> +    /* Read the Dummy byte */
>> +    kcs_inb(kcs_bmc, kcs_bmc->idr);
>> +
>> +    kcs_outb(kcs_bmc, KCS_ZERO_DATA, kcs_bmc->odr);
>> +    kcs_bmc->kcs_phase = KCS_PHASE_ERROR;
>> +    spin_unlock_irqrestore(&kcs_bmc->lock, flags);
>
> You don't set data_in_avail() to zero here?
>
>> +}
>> +
>> +static irqreturn_t kcs_bmc_irq(int irq, void *arg)
>> +{
>> +    struct kcs_bmc *kcs_bmc = arg;
>> +    u32 sts;
>> +
>> +    if (regmap_read(kcs_bmc->map, kcs_bmc->str, &sts) != 0)
>> +        return IRQ_NONE;
>> +
>> +    sts &= (KCS_STR_IBF | KCS_STR_CMD_DAT);
>> +
>> +    switch (sts) {
>> +    case KCS_STR_IBF | KCS_STR_CMD_DAT:
>> +        kcs_rx_cmd(kcs_bmc);
>> +        break;
>> +
>> +    case KCS_STR_IBF:
>> +        kcs_rx_data(kcs_bmc);
>> +
>> +    default:
>> +        return IRQ_NONE;
>> +    }
>> +
>> +    return IRQ_HANDLED;
>> +}
>> +
>> +static int kcs_bmc_config_irq(struct kcs_bmc *kcs_bmc,
>> +            struct platform_device *pdev)
>> +{
>> +    struct device *dev = &pdev->dev;
>> +    int irq;
>> +
>> +    irq = platform_get_irq(pdev, 0);
>> +    if (irq < 0)
>> +        return irq;
>> +
>> +    return devm_request_irq(dev, irq, kcs_bmc_irq, IRQF_SHARED,
>> +            dev_name(dev), kcs_bmc);
>> +}
>> +
>> +
>> +static inline struct kcs_bmc *file_kcs_bmc(struct file *filp)
>> +{
>> +    return container_of(filp->private_data, struct kcs_bmc, miscdev);
>> +}
>> +
>> +static int kcs_bmc_open(struct inode *inode, struct file *filp)
>> +{
>> +    struct kcs_bmc *kcs_bmc = file_kcs_bmc(filp);
>> +    unsigned long flags;
>> +
>> +    if (kcs_bmc->running)
>> +        return -EBUSY;
>> +
>
> The above is a race, it needs to be done inside the lock.
>
>> + spin_lock_irqsave(&kcs_bmc->lock, flags);
>> +    kcs_bmc->kcs_phase     = KCS_PHASE_IDLE;
>> +    kcs_bmc->running       = 1;
>> +    kcs_bmc->data_in_avail = 0;
>> +    spin_unlock_irqrestore(&kcs_bmc->lock, flags);
>
> What happens if the interface is not in a state where it can send a
> message?
> The release code doesn't block until anything is done, so the
> interface might
> not be in a place where you can use it.  I think the init code handles
> it from
> that side, but the release side is not handled.
>
> Also, if release gets called, wouldn't you want to call
> kcs_force_abort() here
> or in release()? That would be the equivalent of the BMC getting reset.
>
>> +
>> +    return 0;
>> +}
>> +
>> +static unsigned int kcs_bmc_poll(struct file *filp, poll_table *wait)
>> +{
>> +    struct kcs_bmc *kcs_bmc = file_kcs_bmc(filp);
>> +    unsigned int mask = 0;
>> +
>> +    poll_wait(filp, &kcs_bmc->queue, wait);
>> +
>> +    if (kcs_bmc->data_in_avail)
>> +        mask |= POLLIN;
>> +
>> +    if (kcs_bmc->kcs_phase == KCS_PHASE_READ)
>> +        mask |= POLLOUT;
>> +
>> +    return mask;
>> +}
>> +
>> +static ssize_t kcs_bmc_read(struct file *filp, char *buf,
>> +                size_t count, loff_t *offset)
>> +{
>> +    struct kcs_bmc *kcs_bmc = file_kcs_bmc(filp);
>> +    int rv;
>> +
>
> You probably ought to handle O_NONBLOCK here.  (Same problem on BT, too.)
>
>> +    rv = wait_event_interruptible(kcs_bmc->queue,
>> +                kcs_bmc->data_in_avail != 0);
>> +    if (rv < 0)
>> +        return -ERESTARTSYS;
>> +
>
> This is a race condition for multiple users.
>
>> +    kcs_bmc->data_in_avail = 0;
>> +
>> +    if (count > kcs_bmc->data_in_idx)
>> +        count = kcs_bmc->data_in_idx;
>> +
>> +    if (copy_to_user(buf, kcs_bmc->data_in, count))
>> +        return -EFAULT;
>> +
>> +    return count;
>> +}
>> +
>> +static ssize_t kcs_bmc_write(struct file *filp, const char *buf,
>> +                 size_t count, loff_t *offset)
>> +{
>> +    struct kcs_bmc *kcs_bmc = file_kcs_bmc(filp);
>> +    unsigned long flags;
>> +
>> +    if (count < 1 || count > KCS_MSG_BUFSIZ)
>> +        return -EINVAL;
>> +
>> +    if (copy_from_user(kcs_bmc->data_out, buf, count))
>> +        return -EFAULT;
>> +
>> +    spin_lock_irqsave(&kcs_bmc->lock, flags);
>> +    if (kcs_bmc->kcs_phase == KCS_PHASE_READ) {
>
> If you don't modify kcs_phase here, you have a race condition. You
> probably
> need a KCS_WAIT_READ condition.  Also, the nomenclature of "read" and
> "write"
> here is a little confusing, since your phases are from the host's
> point of view,
> not this driver's point of view.  You might want to document that
> explicitly.
>
>> +        kcs_bmc->data_out_idx = 1;
>> +        kcs_bmc->data_out_len = count;
>> +        kcs_outb(kcs_bmc, kcs_bmc->data_out[0], kcs_bmc->odr);
>> +    }
>
> So if you write and the data isn't ready, you just drop the data on
> the floor silently?
> Probably not the best design.  You should probably return an error, as
> write can
> only be called after read.
>
>> + spin_unlock_irqrestore(&kcs_bmc->lock, flags);
>> +
>> +    return count;
>> +}
>> +
>> +static long kcs_bmc_ioctl(struct file *filp, unsigned int cmd,
>> +              unsigned long arg)
>> +{
>> +    struct kcs_bmc *kcs_bmc = file_kcs_bmc(filp);
>> +    long ret = 0;
>> +
>> +    switch (cmd) {
>> +    case KCS_BMC_IOCTL_SET_ATN:
>> +        kcs_set_atn(kcs_bmc);
>> +        break;
>> +
>> +    case KCS_BMC_IOCTL_CLR_ATN:
>> +        kcs_clear_atn(kcs_bmc);
>> +        break;
>> +
>> +    case KCS_BMC_IOCTL_FORCE_ABORT:
>> +        kcs_force_abort(kcs_bmc);
>> +        break;
>> +
>> +    default:
>> +        ret = -EINVAL;
>> +        break;
>> +    }
>> +
>> +    return ret;
>> +}
>> +
>> +static int kcs_bmc_release(struct inode *inode, struct file *filp)
>> +{
>> +    struct kcs_bmc *kcs_bmc = file_kcs_bmc(filp);
>> +    unsigned long flags;
>> +
>> +    spin_lock_irqsave(&kcs_bmc->lock, flags);
>> +    kcs_bmc->running = 0;
>> +    spin_unlock_irqrestore(&kcs_bmc->lock, flags);
>> +
>> +    return 0;
>> +}
>> +
>> +static const struct file_operations kcs_bmc_fops = {
>> +    .owner          = THIS_MODULE,
>> +    .open           = kcs_bmc_open,
>> +    .read           = kcs_bmc_read,
>> +    .write          = kcs_bmc_write,
>> +    .release        = kcs_bmc_release,
>> +    .poll           = kcs_bmc_poll,
>> +    .unlocked_ioctl = kcs_bmc_ioctl,
>> +};
>> +
>> +static int kcs_bmc_probe(struct platform_device *pdev)
>> +{
>> +    struct device *dev = &pdev->dev;
>> +    const struct kcs_ioreg *ioreg;
>> +    struct kcs_bmc *kcs_bmc;
>> +    u32 chan, addr;
>> +    int rc;
>> +
>> +    kcs_bmc = devm_kzalloc(dev, sizeof(*kcs_bmc), GFP_KERNEL);
>> +    if (!kcs_bmc)
>> +        return -ENOMEM;
>
> Every error after this point will leak kcs_bmc.  I'd recommend a "goto
> out_err"
> to handle this.
>
>> +
>> +    rc = of_property_read_u32(dev->of_node, "kcs_chan", &chan);
>> +    if ((rc != 0) || (chan == 0 || chan > KCS_CHANNEL_MAX)) {
>> +        dev_err(dev, "no valid 'kcs_chan' configured\n");
>> +        return -ENODEV;
>> +    }
>> +
>> +    rc = of_property_read_u32(dev->of_node, "kcs_addr", &addr);
>> +    if (rc) {
>> +        dev_err(dev, "no valid 'kcs_addr' configured\n");
>> +        return -ENODEV;
>> +    }
>> +
>> +    kcs_bmc->map = syscon_node_to_regmap(dev->parent->of_node);
>> +    if (IS_ERR(kcs_bmc->map)) {
>> +        dev_err(dev, "Couldn't get regmap\n");
>> +        return -ENODEV;
>> +    }
>> +
>> +    dev_set_name(dev, "ipmi-kcs%u", chan);
>> +
>> +    spin_lock_init(&kcs_bmc->lock);
>> +    kcs_bmc->chan = chan;
>
> You need error checking on chan.
>
>> +
>> +    ioreg = &kcs_ioreg_map[chan - 1];
>> +    kcs_bmc->idr  = ioreg->idr;
>> +    kcs_bmc->odr  = ioreg->odr;
>> +    kcs_bmc->str  = ioreg->str;
>> +
>> +    init_waitqueue_head(&kcs_bmc->queue);
>> +    kcs_bmc->data_in  = devm_kmalloc(dev, KCS_MSG_BUFSIZ, GFP_KERNEL);
>> +    kcs_bmc->data_out = devm_kmalloc(dev, KCS_MSG_BUFSIZ, GFP_KERNEL);
>> +    if (kcs_bmc->data_in == NULL || kcs_bmc->data_out == NULL) {
>> +        dev_err(dev, "Failed to allocate data buffers\n");
>
> You will leak memory if you fail to allocate data_out but do allocate
> data_in.
>
>> +        return -ENOMEM;
>> +    }
>> +
>> +    kcs_bmc->miscdev.minor = MISC_DYNAMIC_MINOR;
>> +    kcs_bmc->miscdev.name = dev_name(dev);
>> +    kcs_bmc->miscdev.fops = &kcs_bmc_fops;
>> +    rc = misc_register(&kcs_bmc->miscdev);
>> +    if (rc) {
>> +        dev_err(dev, "Unable to register device\n");
>> +        return rc;
>> +    }
>
> After you call misc_register something can open the device and use it.
> You need to do that after everything is enabled.
>
>> +
>> +    kcs_set_addr(kcs_bmc, addr);
>> +    kcs_enable_channel(kcs_bmc, 1);
>> +
>> +    rc = kcs_bmc_config_irq(kcs_bmc, pdev);
>> +    if (rc) {
>> +        misc_deregister(&kcs_bmc->miscdev);
>> +        return rc;
>> +    }
>> +
>> +    dev_set_drvdata(&pdev->dev, kcs_bmc);
>
> This  should definitely be before you enable or register.  The drvdata
> needs to be available in case an irq comes in, for instance.
>
>> +
>> +    dev_info(dev, "addr=0x%x, idr=0x%x, odr=0x%x, str=0x%x\n",
>> +        addr, kcs_bmc->idr, kcs_bmc->odr, kcs_bmc->str);
>> +
>> +    return 0;
>> +}
>> +
>> +static int kcs_bmc_remove(struct platform_device *pdev)
>> +{
>> +    struct kcs_bmc *kcs_bmc = dev_get_drvdata(&pdev->dev);
>> +
>> +    misc_deregister(&kcs_bmc->miscdev);
>> +
>> +    return 0;
>> +}
>> +
>> +static const struct of_device_id kcs_bmc_match[] = {
>> +    { .compatible = "aspeed,ast2400-kcs-bmc" },
>> +    { .compatible = "aspeed,ast2500-kcs-bmc" },
>> +    { }
>> +};
>> +
>> +static struct platform_driver kcs_bmc_driver = {
>> +    .driver = {
>> +        .name           = DEVICE_NAME,
>> +        .of_match_table = kcs_bmc_match,
>> +    },
>> +    .probe = kcs_bmc_probe,
>> +    .remove = kcs_bmc_remove,
>> +};
>> +
>> +module_platform_driver(kcs_bmc_driver);
>> +
>> +MODULE_DEVICE_TABLE(of, kcs_bmc_match);
>> +MODULE_LICENSE("GPL v2");
>> +MODULE_AUTHOR("Haiyue Wang <haiyue.wang@linux.intel.com>");
>> +MODULE_DESCRIPTION("Linux device interface to the IPMI KCS interface");
>> diff --git a/include/uapi/linux/kcs-bmc.h b/include/uapi/linux/kcs-bmc.h
>> new file mode 100644
>> index 0000000..d1550d3
>> --- /dev/null
>> +++ b/include/uapi/linux/kcs-bmc.h
>> @@ -0,0 +1,14 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +// Copyright (c) 2015-2018, Intel Corporation.
>> +
>> +#ifndef _UAPI_LINUX_KCS_BMC_H
>> +#define _UAPI_LINUX_KCS_BMC_H
>> +
>> +#include <linux/ioctl.h>
>> +
>> +#define __KCS_BMC_IOCTL_MAGIC        'K'
>> +#define KCS_BMC_IOCTL_SET_ATN        _IO(__KCS_BMC_IOCTL_MAGIC, 1)
>> +#define KCS_BMC_IOCTL_CLR_ATN        _IO(__KCS_BMC_IOCTL_MAGIC, 2)
>> +#define KCS_BMC_IOCTL_FORCE_ABORT    _IO(__KCS_BMC_IOCTL_MAGIC, 3)
>> +
>> +#endif /* _UAPI_LINUX_KCS_BMC_H */
>
>

\
 
 \ /
  Last update: 2018-01-16 23:13    [W:0.188 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site