lkml.org 
[lkml]   [2018]   [Jan]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [07/12] watchdog: sp5100_tco: Use dev_ print functions where possible
From
Date
Reviewed-by: Lyude Paul <lyude@redhat.com>

On Sun, 2017-12-24 at 13:04 -0800, Guenter Roeck wrote:
> Use dev_ instead of pr_ functions where possible.
>
> Cc: Zoltán Böszörményi <zboszor@pr.hu>
> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
> ---
> drivers/watchdog/sp5100_tco.c | 40 +++++++++++++++++++++-------------------
> 1 file changed, 21 insertions(+), 19 deletions(-)
>
> diff --git a/drivers/watchdog/sp5100_tco.c b/drivers/watchdog/sp5100_tco.c
> index 5868c6b6bf17..ff240e5be833 100644
> --- a/drivers/watchdog/sp5100_tco.c
> +++ b/drivers/watchdog/sp5100_tco.c
> @@ -326,7 +326,7 @@ static u8 sp5100_tco_read_pm_reg32(u8 index)
> /*
> * Init & exit routines
> */
> -static int sp5100_tco_setupdevice(void)
> +static int sp5100_tco_setupdevice(struct device *dev)
> {
> const char *dev_name = NULL;
> u32 val;
> @@ -347,8 +347,8 @@ static int sp5100_tco_setupdevice(void)
> /* Request the IO ports used by this driver */
> if (!request_muxed_region(SP5100_IO_PM_INDEX_REG,
> SP5100_PM_IOPORTS_SIZE, dev_name)) {
> - pr_err("I/O address 0x%04x already in use\n",
> - SP5100_IO_PM_INDEX_REG);
> + dev_err(dev, "I/O address 0x%04x already in use\n",
> + SP5100_IO_PM_INDEX_REG);
> return -EBUSY;
> }
>
> @@ -358,12 +358,12 @@ static int sp5100_tco_setupdevice(void)
> */
> val = sp5100_tco_read_pm_reg32(base_addr) & 0xfffffff8;
>
> - pr_debug("Got 0x%04x from indirect I/O\n", val);
> + dev_dbg(dev, "Got 0x%04x from indirect I/O\n", val);
>
> /* Check MMIO address conflict */
> if (!request_mem_region_exclusive(val, SP5100_WDT_MEM_MAP_SIZE,
> dev_name)) {
> - pr_debug("MMIO address 0x%04x already in use\n", val);
> + dev_dbg(dev, "MMIO address 0x%04x already in use\n", val);
> /*
> * Secondly, Find the watchdog timer MMIO address
> * from SBResource_MMIO register.
> @@ -381,7 +381,8 @@ static int sp5100_tco_setupdevice(void)
> /* The SBResource_MMIO is enabled and mapped memory space?
> */
> if ((val & (SB800_ACPI_MMIO_DECODE_EN |
> SB800_ACPI_MMIO_SEL)) !=
> SB800_ACPI_MMIO_DECODE_EN
> ) {
> - pr_notice("failed to find MMIO address, giving
> up.\n");
> + dev_notice(dev,
> + "failed to find MMIO address, giving
> up.\n");
> ret = -ENODEV;
> goto unreg_region;
> }
> @@ -392,23 +393,24 @@ static int sp5100_tco_setupdevice(void)
> /* Check MMIO address conflict */
> if (!request_mem_region_exclusive(val,
> SP5100_WDT_MEM_MAP_SIZE,
> dev_name)) {
> - pr_debug("MMIO address 0x%04x already in use\n",
> val);
> + dev_dbg(dev, "MMIO address 0x%04x already in
> use\n",
> + val);
> ret = -EBUSY;
> goto unreg_region;
> }
> - pr_debug("Got 0x%04x from SBResource_MMIO register\n",
> val);
> + dev_dbg(dev, "Got 0x%04x from SBResource_MMIO register\n",
> val);
> }
>
> tcobase_phys = val;
>
> tcobase = ioremap(val, SP5100_WDT_MEM_MAP_SIZE);
> if (!tcobase) {
> - pr_err("failed to get tcobase address\n");
> + dev_err(dev, "failed to get tcobase address\n");
> ret = -ENOMEM;
> goto unreg_mem_region;
> }
>
> - pr_info("Using 0x%04x for watchdog MMIO address\n", val);
> + dev_info(dev, "Using 0x%04x for watchdog MMIO address\n", val);
>
> /* Setup the watchdog timer */
> tco_timer_enable();
> @@ -443,21 +445,22 @@ static int sp5100_tco_setupdevice(void)
> return ret;
> }
>
> -static int sp5100_tco_init(struct platform_device *dev)
> +static int sp5100_tco_init(struct platform_device *pdev)
> {
> + struct device *dev = &pdev->dev;
> int ret;
>
> /*
> * Check whether or not the hardware watchdog is there. If found,
> then
> * set it up.
> */
> - ret = sp5100_tco_setupdevice();
> + ret = sp5100_tco_setupdevice(dev);
> if (ret)
> return ret;
>
> /* Check to see if last reboot was due to watchdog timeout */
> - pr_info("Last reboot was %striggered by watchdog.\n",
> - tco_wdt_fired ? "" : "not ");
> + dev_info(dev, "Last reboot was %striggered by watchdog.\n",
> + tco_wdt_fired ? "" : "not ");
>
> /*
> * Check that the heartbeat value is within it's range.
> @@ -470,16 +473,16 @@ static int sp5100_tco_init(struct platform_device
> *dev)
>
> ret = misc_register(&sp5100_tco_miscdev);
> if (ret != 0) {
> - pr_err("cannot register miscdev on minor=%d (err=%d)\n",
> - WATCHDOG_MINOR, ret);
> + dev_err(dev, "cannot register miscdev on minor=%d
> (err=%d)\n",
> + WATCHDOG_MINOR, ret);
> goto exit;
> }
>
> clear_bit(0, &timer_alive);
>
> /* Show module parameters */
> - pr_info("initialized (0x%p). heartbeat=%d sec (nowayout=%d)\n",
> - tcobase, heartbeat, nowayout);
> + dev_info(dev, "initialized (0x%p). heartbeat=%d sec
> (nowayout=%d)\n",
> + tcobase, heartbeat, nowayout);
>
> return 0;
>
> @@ -581,7 +584,6 @@ static void __exit sp5100_tco_cleanup_module(void)
> {
> platform_device_unregister(sp5100_tco_platform_device);
> platform_driver_unregister(&sp5100_tco_driver);
> - pr_info("SP5100/SB800 TCO Watchdog Module Unloaded\n");
> }
>
> module_init(sp5100_tco_init_module);
--
Cheers,
Lyude Paul

\
 
 \ /
  Last update: 2018-01-16 21:00    [W:0.164 / U:0.776 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site