lkml.org 
[lkml]   [2018]   [Jan]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    SubjectRe: [PATCH 4.9 27/75] net: igmp: Use correct source address on IGMPv3 reports
    From
    Date
    >> easy answer from wikipedia. 224.0.x.x is not the only multicast block
    > AFAICT the code that was changed by this patch should not have
    > anything to do with other multicast blocks. It generates an IGMPv3
    > report with destination address 224.0.0.22. So it would be useful to
    > get more information on how exactly it is causing a failure, so we can
    > find the root cause.
    from your code it always returns 0.0.0.0 and not the correct origin if
    your rule doesnt match. this is a different behaviour. before, the
    origin was used as is and not modified.
    if the origin is set to zero, the routing of the network doesnt work
    anymore. this works for local multicast addresses, but not for neighbor
    networks which are using the routing table
    but correct me if i'm wrong


    --
    Mit freundlichen Grüssen / Regards

    Sebastian Gottschall / CTO

    NewMedia-NET GmbH - DD-WRT
    Firmensitz: Stubenwaldallee 21a, 64625 Bensheim
    Registergericht: Amtsgericht Darmstadt, HRB 25473
    Geschäftsführer: Peter Steinhäuser, Christian Scheele
    http://www.dd-wrt.com
    email: s.gottschall@dd-wrt.com
    Tel.: +496251-582650 / Fax: +496251-5826565

    \
     
     \ /
      Last update: 2018-01-16 16:41    [W:4.572 / U:0.060 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site