lkml.org 
[lkml]   [2018]   [Jan]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 02/15] mmc: mmci: Don't pretend all variants to have MCI_STARBITERR flag
Date
From: Patrice Chotard <patrice.chotard@st.com>

This patch prepares for supporting the STM32 variant that
has no such bit in the status register.

Signed-off-by: Andrea Merello <andrea.merello@gmail.com>
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
---

v2: _ replace start_err bool type by u32

drivers/mmc/host/mmci.c | 16 ++++++++++++++--
1 file changed, 14 insertions(+), 2 deletions(-)

diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 3125dc0..8a4fbc2 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -83,6 +83,8 @@
* @qcom_dml: enables qcom specific dma glue for dma transfers.
* @reversed_irq_handling: handle data irq before cmd irq.
* @mmcimask1: true if variant have a MMCIMASK1 register.
+ * @start_err: bitmask identifying the STARTBITERR bit inside MMCISTATUS
+ * register.
*/
struct variant_data {
unsigned int clkreg;
@@ -113,6 +115,7 @@ struct variant_data {
bool qcom_dml;
bool reversed_irq_handling;
bool mmcimask1;
+ u32 start_err;
};

static struct variant_data variant_arm = {
@@ -123,6 +126,7 @@ struct variant_data {
.f_max = 100000000,
.reversed_irq_handling = true,
.mmcimask1 = true,
+ .start_err = MCI_STARTBITERR,
};

static struct variant_data variant_arm_extended_fifo = {
@@ -132,6 +136,7 @@ struct variant_data {
.pwrreg_powerup = MCI_PWR_UP,
.f_max = 100000000,
.mmcimask1 = true,
+ .start_err = MCI_STARTBITERR,
};

static struct variant_data variant_arm_extended_fifo_hwfc = {
@@ -142,6 +147,7 @@ struct variant_data {
.pwrreg_powerup = MCI_PWR_UP,
.f_max = 100000000,
.mmcimask1 = true,
+ .start_err = MCI_STARTBITERR,
};

static struct variant_data variant_u300 = {
@@ -158,6 +164,7 @@ struct variant_data {
.pwrreg_clkgate = true,
.pwrreg_nopower = true,
.mmcimask1 = true,
+ .start_err = MCI_STARTBITERR,
};

static struct variant_data variant_nomadik = {
@@ -175,6 +182,7 @@ struct variant_data {
.pwrreg_clkgate = true,
.pwrreg_nopower = true,
.mmcimask1 = true,
+ .start_err = MCI_STARTBITERR,
};

static struct variant_data variant_ux500 = {
@@ -198,6 +206,7 @@ struct variant_data {
.busy_detect_mask = MCI_ST_BUSYENDMASK,
.pwrreg_nopower = true,
.mmcimask1 = true,
+ .start_err = MCI_STARTBITERR,
};

static struct variant_data variant_ux500v2 = {
@@ -223,6 +232,7 @@ struct variant_data {
.busy_detect_mask = MCI_ST_BUSYENDMASK,
.pwrreg_nopower = true,
.mmcimask1 = true,
+ .start_err = MCI_STARTBITERR,
};

static struct variant_data variant_qcom = {
@@ -242,6 +252,7 @@ struct variant_data {
.qcom_fifo = true,
.qcom_dml = true,
.mmcimask1 = true,
+ .start_err = MCI_STARTBITERR,
};

/* Busy detection for the ST Micro variant */
@@ -935,8 +946,9 @@ static void mmci_start_data(struct mmci_host *host, struct mmc_data *data)
return;

/* First check for errors */
- if (status & (MCI_DATACRCFAIL|MCI_DATATIMEOUT|MCI_STARTBITERR|
- MCI_TXUNDERRUN|MCI_RXOVERRUN)) {
+ if (status & (MCI_DATACRCFAIL | MCI_DATATIMEOUT |
+ host->variant->start_err |
+ MCI_TXUNDERRUN | MCI_RXOVERRUN)) {
u32 remain, success;

/* Terminate the DMA transfer */
--
1.9.1
\
 
 \ /
  Last update: 2018-01-16 13:33    [W:0.284 / U:0.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site