lkml.org 
[lkml]   [2018]   [Jan]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[tip:x86/platform] x86/jailhouse: Wire up IOAPIC for legacy UART ports
Commit-ID:  cf878e169d37b596de41322291523951540984c1
Gitweb: https://git.kernel.org/tip/cf878e169d37b596de41322291523951540984c1
Author: Jan Kiszka <jan.kiszka@siemens.com>
AuthorDate: Mon, 27 Nov 2017 09:11:53 +0100
Committer: Thomas Gleixner <tglx@linutronix.de>
CommitDate: Sun, 14 Jan 2018 21:11:57 +0100

x86/jailhouse: Wire up IOAPIC for legacy UART ports

The typical I/O interrupts in non-root cells are MSI-based. However, the
platform UARTs do not support MSI. In order to run a non-root cell that
shall use one of them, the standard IOAPIC must be registered and 1:1
routing for IRQ 3 and 4 set up.

If an IOAPIC is not available, the boot loader clears standard_ioapic in
the setup data, so registration is skipped. If the guest is not allowed to
to use one of those pins, Jailhouse will simply ignore the access.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: jailhouse-dev@googlegroups.com
Link: https://lkml.kernel.org/r/90d942dda9d48a8046e00bb3c1bb6757c83227be.1511770314.git.jan.kiszka@siemens.com

---
arch/x86/kernel/jailhouse.c | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)

diff --git a/arch/x86/kernel/jailhouse.c b/arch/x86/kernel/jailhouse.c
index 2b55672..01d5b06 100644
--- a/arch/x86/kernel/jailhouse.c
+++ b/arch/x86/kernel/jailhouse.c
@@ -15,6 +15,7 @@
#include <asm/cpu.h>
#include <asm/hypervisor.h>
#include <asm/i8259.h>
+#include <asm/irqdomain.h>
#include <asm/reboot.h>
#include <asm/setup.h>

@@ -52,6 +53,15 @@ static unsigned long jailhouse_get_tsc(void)

static void __init jailhouse_get_smp_config(unsigned int early)
{
+ struct ioapic_domain_cfg ioapic_cfg = {
+ .type = IOAPIC_DOMAIN_STRICT,
+ .ops = &mp_ioapic_irqdomain_ops,
+ };
+ struct mpc_intsrc mp_irq = {
+ .type = MP_INTSRC,
+ .irqtype = mp_INT,
+ .irqflag = MP_IRQPOL_ACTIVE_HIGH | MP_IRQTRIG_EDGE,
+ };
unsigned int cpu;

if (x2apic_enabled()) {
@@ -77,6 +87,17 @@ static void __init jailhouse_get_smp_config(unsigned int early)
}

smp_found_config = 1;
+
+ if (setup_data.standard_ioapic) {
+ mp_register_ioapic(0, 0xfec00000, gsi_top, &ioapic_cfg);
+
+ /* Register 1:1 mapping for legacy UART IRQs 3 and 4 */
+ mp_irq.srcbusirq = mp_irq.dstirq = 3;
+ mp_save_irq(&mp_irq);
+
+ mp_irq.srcbusirq = mp_irq.dstirq = 4;
+ mp_save_irq(&mp_irq);
+ }
}

static void jailhouse_no_restart(void)
\
 
 \ /
  Last update: 2018-01-14 23:27    [W:0.145 / U:0.220 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site