lkml.org 
[lkml]   [2018]   [Jan]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V3 5/6] usb: serial: f81534: add H/W disable port support
Date
The F81532/534 can be disable port by manufacturer with
following H/W design.
1: Connect DCD/DSR/CTS/RI pin to ground.
2: Connect RX pin to ground.

In driver, we'll implements some detect method likes following:
1: Read MSR.
2: Turn MCR LOOP bit on, off and read LSR after delay with 60ms.
It'll contain BREAK status in LSR.

Signed-off-by: Ji-Ze Hong (Peter Hong) <hpeter+linux_kernel@gmail.com>
---
V3:
1: Separate old patch into refacting and H/W disable patches.

V2:
1: f81534_check_port_hw_disabled() change return type from int to bool.
2: Add help function f81534_set_phy_port_register() /
f81534_get_phy_port_register() for f81534_check_port_hw_disabled()
to read register without port.
3: Re-write f81534_calc_num_ports() & f81534_attach() to reduce the
f81534_check_port_hw_disabled() repeatedly called.

drivers/usb/serial/f81534.c | 81 +++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 81 insertions(+)

diff --git a/drivers/usb/serial/f81534.c b/drivers/usb/serial/f81534.c
index bc0a4bd5dcec..08ef72ea2eec 100644
--- a/drivers/usb/serial/f81534.c
+++ b/drivers/usb/serial/f81534.c
@@ -307,6 +307,20 @@ static int f81534_set_mask_register(struct usb_serial *serial, u16 reg,
return f81534_set_register(serial, reg, tmp);
}

+static int f81534_set_phy_port_register(struct usb_serial *serial, int phy,
+ u16 reg, u8 data)
+{
+ return f81534_set_register(serial, reg + F81534_UART_OFFSET * phy,
+ data);
+}
+
+static int f81534_get_phy_port_register(struct usb_serial *serial, int phy,
+ u16 reg, u8 *data)
+{
+ return f81534_get_register(serial, reg + F81534_UART_OFFSET * phy,
+ data);
+}
+
static int f81534_set_port_register(struct usb_serial_port *port, u16 reg,
u8 data)
{
@@ -733,6 +747,70 @@ static int f81534_find_config_idx(struct usb_serial *serial, u8 *index)
}

/*
+ * The F81532/534 will not report serial port to USB serial subsystem when
+ * H/W DCD/DSR/CTS/RI/RX pin connected to ground.
+ *
+ * To detect RX pin status, we'll enable MCR interal loopback, disable it and
+ * delayed for 60ms. It connected to ground If LSR register report UART_LSR_BI.
+ */
+static bool f81534_check_port_hw_disabled(struct usb_serial *serial, int phy)
+{
+ int status;
+ u8 old_mcr;
+ u8 msr;
+ u8 lsr;
+ u8 msr_mask;
+
+ msr_mask = UART_MSR_DCD | UART_MSR_RI | UART_MSR_DSR | UART_MSR_CTS;
+
+ status = f81534_get_phy_port_register(serial, phy,
+ F81534_MODEM_STATUS_REG, &msr);
+ if (status)
+ return false;
+
+ if ((msr & msr_mask) != msr_mask)
+ return false;
+
+ status = f81534_set_phy_port_register(serial, phy,
+ F81534_FIFO_CONTROL_REG, UART_FCR_ENABLE_FIFO |
+ UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
+ if (status)
+ return false;
+
+ status = f81534_get_phy_port_register(serial, phy,
+ F81534_MODEM_CONTROL_REG, &old_mcr);
+ if (status)
+ return false;
+
+ status = f81534_set_phy_port_register(serial, phy,
+ F81534_MODEM_CONTROL_REG, UART_MCR_LOOP);
+ if (status)
+ return false;
+
+ status = f81534_set_phy_port_register(serial, phy,
+ F81534_MODEM_CONTROL_REG, 0x0);
+ if (status)
+ return false;
+
+ msleep(60);
+
+ status = f81534_get_phy_port_register(serial, phy,
+ F81534_LINE_STATUS_REG, &lsr);
+ if (status)
+ return false;
+
+ status = f81534_set_phy_port_register(serial, phy,
+ F81534_MODEM_CONTROL_REG, old_mcr);
+ if (status)
+ return false;
+
+ if ((lsr & UART_LSR_BI) == UART_LSR_BI)
+ return true;
+
+ return false;
+}
+
+/*
* We had 2 generation of F81532/534 IC. All has an internal storage.
*
* 1st is pure USB-to-TTL RS232 IC and designed for 4 ports only, no any
@@ -823,6 +901,9 @@ static int f81534_calc_num_ports(struct usb_serial *serial,

/* New style, find all possible ports */
for (i = 0; i < F81534_NUM_PORT; ++i) {
+ if (f81534_check_port_hw_disabled(serial, i))
+ serial_priv->conf_data[i] |= F81534_PORT_UNAVAILABLE;
+
if (serial_priv->conf_data[i] & F81534_PORT_UNAVAILABLE)
continue;

--
2.7.4
\
 
 \ /
  Last update: 2018-01-14 23:22    [W:0.057 / U:0.644 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site