lkml.org 
[lkml]   [2018]   [Jan]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] gpio: Add GPIO support for the ACCES PCIe-IDIO-24 family
On Tue, Jan 9, 2018 at 11:21 PM, William Breathitt Gray
<vilhelm.gray@gmail.com> wrote:

> The ACCES PCIe-IDIO-24 device provides 56 lines of digital I/O (24 lines
> of optically-isolated non-polarized digital inputs for AC and DC control
> signals, 24 lines of isolated solid state FET digital outputs, and 8
> non-isolated TTL/CMOS compatible programmable I/O). An interrupt is
> generated when any of the inputs change state (low to high or high to
> low).
>
> Input filter control is not supported by this driver, and input filters
> are deactivated by this driver. These devices are capable of
> get_multiple and set_multiple functionality, but these functions have
> not yet been implemented for this driver. Change-Of-State (COS)
> detection functionality may be configured to fire interrupts on
> exclusively rising/falling edges, but this driver currently only
> implements COS detection for either both edges or none.
>
> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>

Patch applied.

Really clean and nice work.

Yours,
Linus Walleij

\
 
 \ /
  Last update: 2018-01-14 23:21    [W:0.064 / U:0.360 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site