lkml.org 
[lkml]   [2017]   [Sep]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v5 06/10] ARM: dts: sunxi: h3/h5: represent the mdio switch used by sun8i-h3-emac
Date
Since dwmac-sun8i could use either an integrated PHY or an external PHY
(which could be at same MDIO address), we need to represent this selection
by a MDIO switch.

Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
---
arch/arm/boot/dts/sunxi-h3-h5.dtsi | 30 +++++++++++++++++++++++++-----
1 file changed, 25 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
index 4b599b5d26f6..e137377b312d 100644
--- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi
+++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
@@ -417,14 +417,34 @@
#size-cells = <0>;
status = "disabled";

- mdio: mdio {
+ mdio0: mdio {
#address-cells = <1>;
#size-cells = <0>;
- int_mii_phy: ethernet-phy@1 {
- compatible = "ethernet-phy-ieee802.3-c22";
+ compatible = "snps,dwmac-mdio";
+ };
+
+ mdio-mux {
+ compatible = "mdio-mux";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* Only one MDIO is usable at the time */
+ internal_mdio: mdio@1 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ int_mii_phy: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ clocks = <&ccu CLK_BUS_EPHY>;
+ resets = <&ccu RST_BUS_EPHY>;
+ phy-is-integrated;
+ };
+ };
+ mdio: mdio@0 {
reg = <1>;
- clocks = <&ccu CLK_BUS_EPHY>;
- resets = <&ccu RST_BUS_EPHY>;
+ #address-cells = <1>;
+ #size-cells = <0>;
};
};
};
--
2.13.5
\
 
 \ /
  Last update: 2017-09-08 09:16    [W:0.165 / U:2.656 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site