lkml.org 
[lkml]   [2017]   [Sep]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 2/2] ARM: dts: k2g-evm: Enable USB 0 and 1
Date
From: Roger Quadros <rogerq@ti.com>

Enable USB 0 which will be used as a host port and USB 1 which will be
used in peripheral mode.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
---
arch/arm/boot/dts/keystone-k2g-evm.dts | 26 ++++++++++++++++++++++++++
1 file changed, 26 insertions(+)

diff --git a/arch/arm/boot/dts/keystone-k2g-evm.dts b/arch/arm/boot/dts/keystone-k2g-evm.dts
index 61883cb..4f56295 100644
--- a/arch/arm/boot/dts/keystone-k2g-evm.dts
+++ b/arch/arm/boot/dts/keystone-k2g-evm.dts
@@ -41,3 +41,29 @@
pinctrl-0 = <&uart0_pins>;
status = "okay";
};
+
+&keystone_usb0 {
+ status = "okay";
+};
+
+&usb0_phy {
+ status = "okay";
+};
+
+&usb0 {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&keystone_usb1 {
+ status = "okay";
+};
+
+&usb1_phy {
+ status = "okay";
+};
+
+&usb1 {
+ dr_mode = "peripheral";
+ status = "okay";
+};
--
2.9.4.dirty
\
 
 \ /
  Last update: 2017-09-08 20:44    [W:0.034 / U:21.308 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site