lkml.org 
[lkml]   [2017]   [Sep]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v1 07/10] iio:adc:at91-sama5d2: Support backup mode
2017-09-08 18:03 GMT+02:00 Nicolas Ferre <nicolas.ferre@microchip.com>:
> On 08/09/2017 at 17:36, Romain Izard wrote:
>> Support the backup mode for platform suspend, by restoring the hardware
>> registers on resume.
>>
>> Signed-off-by: Romain Izard <romain.izard.pro@gmail.com>
>
> Romain,
>
> Thanks for your series: definitively some of your patches need to be
> integrated (I've merged some of them in our current linux-4.9-at91 branch.
> However, It seems that some of your additions have already been
> submitted and/or accepted by maintainers.
> For instance an equivalent of this one seems already in Linus' tree:
> 500a2eefd6b16ba141a8fb777ea6962d2eb65e3b ("iio: adc: at91-sama5d2_adc:
> add support for suspend/resume functionality").
>
> Please tell us if it fits what your observed on this driver (or others).
>
> Regards,
>
>> ---
>> drivers/iio/adc/at91-sama5d2_adc.c | 71 ++++++++++++++++++++++++++++++++------
>> 1 file changed, 61 insertions(+), 10 deletions(-)
>>
>> diff --git a/drivers/iio/adc/at91-sama5d2_adc.c b/drivers/iio/adc/at91-sama5d2_adc.c
>> index e10dca3ed74b..f9718c863363 100644
>> --- a/drivers/iio/adc/at91-sama5d2_adc.c
>> +++ b/drivers/iio/adc/at91-sama5d2_adc.c
>> @@ -200,6 +200,7 @@ struct at91_adc_state {
>> u32 conversion_value;
>> struct at91_adc_soc_info soc_info;
>> wait_queue_head_t wq_data_available;
>> + unsigned int current_rate;
>> /*
>> * lock to prevent concurrent 'single conversion' requests through
>> * sysfs.
>> @@ -269,6 +270,8 @@ static void at91_adc_setup_samp_freq(struct at91_adc_state *st, unsigned freq)
>> mr |= AT91_SAMA5D2_MR_PRESCAL(prescal);
>> at91_adc_writel(st, AT91_SAMA5D2_MR, mr);
>>
>> + st->current_rate = freq;
>> +
>> dev_dbg(&indio_dev->dev, "freq: %u, startup: %u, prescal: %u\n",
>> freq, startup, prescal);
>> }
>> @@ -375,7 +378,9 @@ static int at91_adc_write_raw(struct iio_dev *indio_dev,
>> val > st->soc_info.max_sample_rate)
>> return -EINVAL;
>>
>> + mutex_lock(&st->lock);
>> at91_adc_setup_samp_freq(st, val);
>> + mutex_unlock(&st->lock);
>>
>> return 0;
>> }
>> @@ -386,6 +391,21 @@ static const struct iio_info at91_adc_info = {
>> .driver_module = THIS_MODULE,
>> };
>>
>> +static void at91_adc_init_hw(struct at91_adc_state *st, unsigned int freq)
>> +{
>> + at91_adc_writel(st, AT91_SAMA5D2_CR, AT91_SAMA5D2_CR_SWRST);
>> + at91_adc_writel(st, AT91_SAMA5D2_IDR, 0xffffffff);
>> + /*
>> + * Transfer field must be set to 2 according to the datasheet and
>> + * allows different analog settings for each channel.
>> + */
>> + at91_adc_writel(st, AT91_SAMA5D2_MR,
>> + AT91_SAMA5D2_MR_TRANSFER(2) | AT91_SAMA5D2_MR_ANACH);
>> +
>> + at91_adc_setup_samp_freq(st, freq);
>> +
>> +}
>> +
>> static int at91_adc_probe(struct platform_device *pdev)
>> {
>> struct iio_dev *indio_dev;
>> @@ -482,16 +502,7 @@ static int at91_adc_probe(struct platform_device *pdev)
>> goto vref_disable;
>> }
>>
>> - at91_adc_writel(st, AT91_SAMA5D2_CR, AT91_SAMA5D2_CR_SWRST);
>> - at91_adc_writel(st, AT91_SAMA5D2_IDR, 0xffffffff);
>> - /*
>> - * Transfer field must be set to 2 according to the datasheet and
>> - * allows different analog settings for each channel.
>> - */
>> - at91_adc_writel(st, AT91_SAMA5D2_MR,
>> - AT91_SAMA5D2_MR_TRANSFER(2) | AT91_SAMA5D2_MR_ANACH);
>> -
>> - at91_adc_setup_samp_freq(st, st->soc_info.min_sample_rate);
>> + at91_adc_init_hw(st, st->soc_info.min_sample_rate);
>>
>> ret = clk_prepare_enable(st->per_clk);
>> if (ret)
>> @@ -541,12 +552,52 @@ static const struct of_device_id at91_adc_dt_match[] = {
>> };
>> MODULE_DEVICE_TABLE(of, at91_adc_dt_match);
>>
>> +#ifdef CONFIG_PM_SLEEP
>> +static int at91_adc_suspend(struct device *dev)
>> +{
>> + struct platform_device *pdev = to_platform_device(dev);
>> + struct iio_dev *indio_dev = platform_get_drvdata(pdev);
>> + struct at91_adc_state *st = iio_priv(indio_dev);
>> +
>> + clk_disable_unprepare(st->per_clk);
>> +
>> + regulator_disable(st->vref);
>> + regulator_disable(st->reg);
>> +
>> + return 0;
>> +}
>> +
>> +static int at91_adc_resume(struct device *dev)
>> +{
>> + struct platform_device *pdev = to_platform_device(dev);
>> + struct iio_dev *indio_dev = platform_get_drvdata(pdev);
>> + struct at91_adc_state *st = iio_priv(indio_dev);
>> + int err;
>> +
>> + err = regulator_enable(st->reg);
>> + if (err)
>> + return err;
>> +
>> + err = regulator_enable(st->vref);
>> + if (err)
>> + return err;
>> +
>> + at91_adc_init_hw(st, st->current_rate);
>> +
>> + err = clk_prepare_enable(st->per_clk);
>> + return err;
>> +}
>> +#endif
>> +
>> +static SIMPLE_DEV_PM_OPS(at91_adc_pm_ops, at91_adc_suspend, at91_adc_resume);
>> +
>> static struct platform_driver at91_adc_driver = {
>> .probe = at91_adc_probe,
>> .remove = at91_adc_remove,
>> .driver = {
>> .name = "at91-sama5d2_adc",
>> .of_match_table = at91_adc_dt_match,
>> + .pm = &at91_adc_pm_ops,
>> },
>> };
>> module_platform_driver(at91_adc_driver)
>>

Please ignore this patch. The existing merged patch is better.

Best regards,
--
Romain Izard

\
 
 \ /
  Last update: 2017-09-08 18:23    [W:0.093 / U:0.380 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site