lkml.org 
[lkml]   [2017]   [Sep]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.13 12/47] iio: adc: ti-ads1015: fix incorrect data rate setting update
Date
4.13-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Akinobu Mita <akinobu.mita@gmail.com>

commit 0d106b74c558e3000aa0e058b4725cacb70ce77a upstream.

The ti-ads1015 driver has eight iio voltage channels and each iio channel
can hold own sampling frequency information.

The ADS1015 device only have a single config register which contains an
input multiplexer selection, PGA and data rate settings. So the driver
should load the correct settings when the input multiplexer selection is
changed.

However, regardless of which channlel is currently selected, changing any
iio channel's sampling frequency information immediately overwrites the
current data rate setting in the config register.

It breaks the current data rate setting if the different channel's sampling
frequency information is changed because the data rate setting is not
reloaded when the input multiplexer is switched.

This removes the unexpected config register update and correctly load the
data rate setting before getting adc result.

Cc: Daniel Baluta <daniel.baluta@gmail.com>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
drivers/iio/adc/ti-ads1015.c | 27 ++++++++++-----------------
1 file changed, 10 insertions(+), 17 deletions(-)

--- a/drivers/iio/adc/ti-ads1015.c
+++ b/drivers/iio/adc/ti-ads1015.c
@@ -252,9 +252,11 @@ int ads1015_get_adc_result(struct ads101

ret = regmap_update_bits_check(data->regmap, ADS1015_CFG_REG,
ADS1015_CFG_MUX_MASK |
- ADS1015_CFG_PGA_MASK,
+ ADS1015_CFG_PGA_MASK |
+ ADS1015_CFG_DR_MASK,
chan << ADS1015_CFG_MUX_SHIFT |
- pga << ADS1015_CFG_PGA_SHIFT,
+ pga << ADS1015_CFG_PGA_SHIFT |
+ dr << ADS1015_CFG_DR_SHIFT,
&change);
if (ret < 0)
return ret;
@@ -325,25 +327,16 @@ static int ads1015_set_scale(struct ads1

static int ads1015_set_data_rate(struct ads1015_data *data, int chan, int rate)
{
- int i, ret, rindex = -1;
+ int i;

- for (i = 0; i < ARRAY_SIZE(ads1015_data_rate); i++)
+ for (i = 0; i < ARRAY_SIZE(ads1015_data_rate); i++) {
if (data->data_rate[i] == rate) {
- rindex = i;
- break;
+ data->channel_data[chan].data_rate = i;
+ return 0;
}
- if (rindex < 0)
- return -EINVAL;
-
- ret = regmap_update_bits(data->regmap, ADS1015_CFG_REG,
- ADS1015_CFG_DR_MASK,
- rindex << ADS1015_CFG_DR_SHIFT);
- if (ret < 0)
- return ret;
-
- data->channel_data[chan].data_rate = rindex;
+ }

- return 0;
+ return -EINVAL;
}

static int ads1015_read_raw(struct iio_dev *indio_dev,

\
 
 \ /
  Last update: 2017-09-08 15:56    [W:0.256 / U:2.336 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site