lkml.org 
[lkml]   [2017]   [Sep]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] sound: soc: fsl: Do not set DAI sysclk when it is equal to system freq
From
Date
Hi Nicolin,

> On Wed, Sep 06, 2017 at 08:35:50PM +0200, Łukasz Majewski wrote:
>
>> clocks = <&clks IMX6QDL_CLK_SSI2_IPG>,
>> <&clks IMX6QDL_CLK_SSI2>;
>> clock-names = "ipg", "baud";
>
>>>> dailink_master: cpu {
>>>> sound-dai = <&ssi2>;
>>>> clock = <&SSSS>;
>>
>> If possible I do prefer a solution, which uses only DTS.
>> Side question - how to refer to baud clock from [1]?
>
> Just add a property to this cpu node like:
> clock = <&clks IMX6QDL_CLK_SSI2>;

This doesn't solve the issue:

root@display5:~# speaker-test

speaker-test 1.1.3

Playback device is default
Stream parameters are 48000Hz, S16_LE, 1 channels
Using 16 octaves of pink noise
Rate set to 48000Hz (requested 48fsl-ssi-dai 202c000.ssi: bitclk > ipgclk/5
000Hz)
Buffer size range from 64fsl-ssi-dai 202c000.ssi: ASoC: can't set
202c000.ssi hw params: -22
to 65536
Period size range from 32 to 8191
Using max buffer size 65536
Periods = 4
Unable to set hw params for playback: Invalid argument
Setting of hwparams failed: Invalid argument


>
>>>> system-clock-frequency = <XXXX>;
>
> This would not be necessary unless you want to specify a clock rate
> so as to override the clock rate configuration in hw_params().
>
>>> This is the right solution based on current simple-card driver. For
>>> SSI (having two clocks), you have to specify the baud clock in the
>>> cpu node like that. I believe this is what the simple-card designer
>>> expected users to do since the cpu node is the first place that the
>>> driver tries to look at.
>>
>> I will give a shoot the option with adding the ipg clock.
>
> No, not ipg clock. You should use the second clock -- baud clock.
>


--
Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de

\
 
 \ /
  Last update: 2017-09-08 01:11    [W:0.060 / U:0.424 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site