lkml.org 
[lkml]   [2017]   [Sep]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2] md/raid5: preserve STRIPE_ON_UNPLUG_LIST in break_stripe_batch_list
On Wed, Sep 06, 2017 at 11:02:35AM +0800, Dennis Yang wrote:
> In release_stripe_plug(), if a stripe_head has its STRIPE_ON_UNPLUG_LIST
> set, it indicates that this stripe_head is already in the raid5_plug_cb
> list and release_stripe() would be called instead to drop a reference
> count. Otherwise, the STRIPE_ON_UNPLUG_LIST bit would be set for this
> stripe_head and it will get queued into the raid5_plug_cb list.
>
> Since break_stripe_batch_list() did not preserve STRIPE_ON_UNPLUG_LIST,
> A stripe could be re-added to plug list while it is still on that list
> in the following situation. If stripe_head A is added to another
> stripe_head B's batch list, in this case A will have its
> batch_head != NULL and be added into the plug list. After that,
> stripe_head B gets handled and called break_stripe_batch_list() to
> reset all the batched stripe_head(including A which is still on
> the plug list)'s state and reset their batch_head to NULL.
> Before the plug list gets processed, if there is another write request
> comes in and get stripe_head A, A will have its batch_head == NULL
> (cleared by calling break_stripe_batch_list() on B) and be added to
> plug list once again.

applied, thanks!

> Signed-off-by: Dennis Yang <dennisyang@qnap.com>
> ---
> drivers/md/raid5.c | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
> index e92dd2d..faf3cfd 100644
> --- a/drivers/md/raid5.c
> +++ b/drivers/md/raid5.c
> @@ -4611,7 +4611,8 @@ static void break_stripe_batch_list(struct stripe_head *head_sh,
>
> set_mask_bits(&sh->state, ~(STRIPE_EXPAND_SYNC_FLAGS |
> (1 << STRIPE_PREREAD_ACTIVE) |
> - (1 << STRIPE_DEGRADED)),
> + (1 << STRIPE_DEGRADED) |
> + (1 << STRIPE_ON_UNPLUG_LIST)),
> head_sh->state & (1 << STRIPE_INSYNC));
>
> sh->check_state = head_sh->check_state;
> --
> 1.9.1
>

\
 
 \ /
  Last update: 2017-09-06 07:51    [W:0.043 / U:4.536 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site