lkml.org 
[lkml]   [2017]   [Sep]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v9 1/2] ASoC: rt5514: Add devicetree bindings for rt5514-spi
Date
Add devicetree bindings documentation file for rt5514 spi dsp codec.

Also update rt5514 i2c dt-binding's compatible to distinguish it from
rt5514 spi.

Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
---

Changes in v9:
Address comments from Brian.

.../devicetree/bindings/sound/rt5514-spi.txt | 29 ++++++++++++++++++++++
Documentation/devicetree/bindings/sound/rt5514.txt | 4 +--
2 files changed, 31 insertions(+), 2 deletions(-)
create mode 100644 Documentation/devicetree/bindings/sound/rt5514-spi.txt

diff --git a/Documentation/devicetree/bindings/sound/rt5514-spi.txt b/Documentation/devicetree/bindings/sound/rt5514-spi.txt
new file mode 100644
index 000000000000..7911d1adbd29
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/rt5514-spi.txt
@@ -0,0 +1,29 @@
+RT5514 SPI audio CODEC
+
+This device supports SPI only.
+
+Required properties:
+
+- compatible : "realtek,rt5514" or "realtek,rt5514", "realtek,rt5514-spi".
+
+- reg : The SPI address of the device.
+
+Optional properties:
+
+- interrupt-parent: Should be the phandle for the interrupt controller
+- interrupts: The interrupt number to the cpu. The interrupt specifier format
+ depends on the interrupt controller.
+
+Example:
+
+codec: rt5514-spi@0 {
+ compatible = "realtek,rt5514", "realtek,rt5514-spi";
+ reg = <0>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&mic_int>;
+
+ interrupt-parent = <&gpio1>;
+ interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;
+ wakeup-source;
+};
diff --git a/Documentation/devicetree/bindings/sound/rt5514.txt b/Documentation/devicetree/bindings/sound/rt5514.txt
index 929ca6756b02..841a1159e234 100644
--- a/Documentation/devicetree/bindings/sound/rt5514.txt
+++ b/Documentation/devicetree/bindings/sound/rt5514.txt
@@ -4,7 +4,7 @@ This device supports I2C only.

Required properties:

-- compatible : "realtek,rt5514".
+- compatible : "realtek,rt5514" or "realtek,rt5514", "realtek,rt5514-i2c".

- reg : The I2C address of the device.

@@ -28,6 +28,6 @@ Pins on the device (for linking into audio routes) for RT5514:
Example:

codec: rt5514@57 {
- compatible = "realtek,rt5514";
+ compatible = "realtek,rt5514", "realtek,rt5514-i2c";
reg = <0x57>;
};
--
2.11.0

\
 
 \ /
  Last update: 2017-09-06 04:43    [W:0.032 / U:0.636 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site